Personal Web Site of

                _
Mostafa Zeinoddini_

 

        Home Page  Civil Engineering Faculty  

 

  Home     

Educations

University Position

  Courses Taught

Field of Interest

Publications

Thesis Supervised

Graduate Students

Online Courses

Resume

Contact

صفحه فارسی

 

       

 

 

Zeinoddini-Photo-87-5-Res600

Mostafa Zeinoddini

 

Address:

No, 1346, ValiAsr St., Mirdamad Cross, Faculty of Civil Engineering, Khajeh Nasir Toosi University of Technology, Tehran, 1996715433, Iran

Tel (office):      (+98) 021 88779473-5 Internal No. 406

Fax:           (+98) 021 88779476

Email:        zeinoddini@kntu.ac.ir

Web-Site: http://sahand.kntu.ac.ir/~zeinoddini/

 

&   Personal information:

Gender:                Male

Date of birth:        9 Oct. 58

Nationality:              Iranian

 

 

&   Education:

1996 – 1999     University of Surrey, UK

Ph.D. in Offshore and Marine Structures.

Subject: Dynamic Behaviour of Offshore Tubular Members Subjected to Ship Impact Loads

1986                University of Tehran, Iran

MSc (Eng.) in Civil Engineering.

1984                University of Tehran, Iran

BSc (Eng.) in Civil Engineering.

 

&   Academic Experiences:

2012 up now    Khajeh Nasir Toosi (KNToosi) University of Technology, Tehran, Iran.

·         Head of the Internal Audit Office

2002 up now    Khajeh Nasir Toosi (KNToosi) University of Technology, Tehran, Iran.

·         Professor

2008               Khajeh Nasir Toosi (KNToosi) University of Technology (KNTU), Tehran, Iran.

·         Head of the Structure Eng. Group.

1999 up 2002 Ministry of Science, Research and Technology, Tehran, Iran.

·         Assistant Professor, Secretary of the Eng. Committee of Iranian High Council for the Higher Education Development

1997 – 1999       University of Surrey, Guildford, Surrey, UK.

·      Assistantship on MSc courses of ‘Advanced in Steel Structures Design’, and ‘Plastic Design of the Steel Structures’.

1986 – 1996      Ministry of Science, Research and Technology, Tehran, Iran.

·         Lecturer

 

&   Lectured Courses

·         Design of Offshore Platforms (MSc Course)

·         Design of Conventional Marine Structures (MSc Course)

·         Port Planning (MSc Course)

·         Marine and offshore Operations (MSc Course)

·         Construction of Marine and Offshore Structures (MSc Course)

·         Theory of Explosions and Design of Structures to Impact and Explosion Loads (PhD Course)

·         Non-Linear Structural Analysis (PhD Course)

·         Fatigue Design of Structures and Offshore Structures (PhD Course)

·         Structural Analysis (BSc Course)

·         Bridge Design (MSc Course)

·         Advanced Steel Structures Design (MSc Course)

·         Plastic Design of the Steel Structures (MSc Course)

·         Welding Technology and Inspections (BSc Course)

·         Construction of Steel Structures (BSc Course)

·         Statics (BSc Course)

 

&   Professional Experiences:

 

2011–2013        TWI-Persia, Tehran, Iran, Structural Integrity Assessment of 20 Aging Oil Platforms in the Persian Gulf", Senior project leader.

2010–2012          KNTU/INSF (Iran National Science Foundation), "Side Effects of Repair Welding on the Structural Integrity of Offshore Pipelines", A research Project.

2010–2012          KNTU/PMO Tehran, Iran, “Feasibility Study on a Wave Forecasting System in Iranian Sea Waters”, A contract between the Iranian Ports and Maritime Organization (PMO) and KNTU, Contract Manager.

2008–2010          KNTU/POGC Tehran, Iran, “Development of Semi-Destructive Hole-Drilling Method for In-Situ Measurement of Existing Loads in the Offshore Steel Rigs Components", A contract between the Pars Oil and Gas Company (POGC) and KNTU, Contract Manager.

2008–2010          KNTU/Ministry of Housing Tehran, Iran, “Dynamic Testing of the Iranian Parliament Buildings”, A contract between the Ministry of Housing and KNTU, Contract Manager.

2003– 2008       IREMCO-COWI, Tehran, Iran, Lake Urmia Causeway/Bridge Project, Technical Manager/Consultant.

2006–2007          KNTU/Housing Foundation, Tehran, Iran, “Retrofit Study of Buildings Damaged in March 2006 Earthquake in Brojerd-Iran”, A contract between the Iranian Housing Foundation (Bonyad Maskan) and KNTU, Contract Manager.

2004–2007          KNTU/Ministry of Housing Tehran, Iran, “Seismic Assessment of the Iranian Parliament (Madjles Shouraye Islami)”, A contract between the Ministry of Housing and KNTU, Contract Manager.

2002– 2003       Tehran Jonoub Oil&Gas Company, Tehran, Iran, Salman and BGCS EPC Projects, Technical bid preparation

2000– 2001       Ekbatan Building Co., Tehran, Iran, Member of the board of directors and technical manager.

1995– 1996       Khane Gostar Yekom Co., Tehran, Iran, Consultant and structural designer.

1995                 Ministry of Power, Water & Wastewater Research Center, Tehran, Iran, Researcher.

1990– 1995       Hashtgerd New City Development Co., Tehran, Iran, Member of the board of directors and technical manager.

1988– 1990       Khane Gostar (Tolidi) Co., Tehran, Iran, Technical manager, design jobs.

1985– 1988       Shahgholi High Rise Co., Tehran, Iran, Head of the technical office.

1983– 1985       Telad Company, Tehran, Iran, Member of the board of directors and the executive manager.

 

&   Key Skills:

Practical:            Expertise in a variety of the experimental and laboratory equipments and techniques for structural, mechanical and impact testing.

Computing:       Familiarity with numerical methods in structural, mechanical, impact and offshore engineering; advanced finite element programs for structural analysis and numerical methods for fluid mechanics.

Languages:        Fluent English, Persian (native speaker) and Arabic (reading, listening).

 

&   Books:

Zeinoddini, M., 2005, ‘Design and Construction of Offshore Oil Platforms’, A Persian Translation of the ‘Structural Systems, Offshore Structures’ From ESDEP (European Steel Structures Education Programme), Publisher the Iranian Oceanography Institute.

Zeinoddini, M., 2011, ‘Design of Offshore Oil/Gas Platforms against Ship Impacts: Dynamic and Quasi-Static Behaviour of Steel Tubulars’, LAP Lambert Academic Publishing, Saarbrücken Germany, ISBN-13: 978-3845422701 (in English).

Zeinoddini, M., Bakhtiari, A. 2013, ‘Urmia Dike and Its Engineering Challenges: Lessons Learned and Impacts, LAP Lambert Academic Publishing, Saarbrücken Germany, ISBN-13: 978-3845422701 (in English).

Zeinoddini, M., 2013, ‘Design of Floating Offshore Oli/Gas Platforms’, in Persian, (Draft copy).

طراحی و اجرای سکوهای ثابت نفتی

 

9781613247099

&   Chapters in Books:


Zeinoddini, M., Zandi, A.P.., Kashefi, K., 2012, ‘Field Measurement Methods for Fatigue Life Evaluation of Existing Steel Bridges’, in ‘Advances in Engineering Research. Volume II’ Editor Victoria M. Petrova, ISBN: 978-1-61324-709-9, Nova Science Publishers, Inc., NewYork, USA pp. 1- 64.

 

 

 

&   Journal Papers:


Zeinoddini, M., Harding, J.E. and Parke, G.A.R., 1998, Effect of impact damage on the capacity of tubular steel members of offshore structures’, Journal of Marine Structures, Vol. 11, Nos. 4-5, pp. 141-158.

Savory, E., Parke, G.A.R., Disney, P., Toy, N. and Zeinoddini, M., 1998, ‘Field measurement of wind-induced transmission tower foundation loads’, Journal of Wind and Structures Vol. 1, No. 2, pp. 183-199.

Zeinoddini, M., Harding, J.E. and Parke, G.A.R., 1999, Dynamic behaviour of axially pre-loaded tubular steel members of offshore structures subjected to impact damage’, Journal of Ocean Engineering, Vol. 26, pp. 963-978.

Zeinoddini, M., Harding, J.E. and Parke, G.A.R., 2000, Contribution of ring resistance in the behaviour of steel tubes subjected to a lateral impact’, International Journal of Mechanical Sciences, Vol. 42(12), pp. 2303-2320.

Savory, E., Parke, G.A.R., Zeinoddini, M., Toy, N. and Disney, P., 2001, ‘Modelling of tornado and microburst- induced wind loading and failure of a lattice transmission tower’ Journal of Engineering Structures, Vol. 23, pp. 365-375.

Zeinoddini, M., Parke, G.A.R., and Harding, J.E., 2002, ‘Axially pre-loaded steel tubes subjected to lateral impacts – an experimental study’ International Journal of Impact Engineering Vol. 27(6), pp. 669-690.

Zeinoddini, M., Parke, G.A.R. and Disney, 2004, ‘The stability study of an innovative dome’, International Journal of Space Structures Vol. 19(2), pp. 109-125.

Tofighi, M.A., Zeinoddini, M., Golshani, A.A., 2006, ‘Two dimensional simulation of the urmia lake hydrodynamics for predicting the flow regimes’ (in Persian), Iranian Journal of Marine Engineering Vol. 3 (4) pp 37-47.

Zeinoddini, M., Harding, J.E. and Parke, G.A.R., 2008, ‘Axially pre-loaded steel tubes subjected to lateral impacts - a numerical simulation’, International Journal of Impact Engineering Vol. 35(11), pp. 1267–1279.

Zeinoddini, M. and Parke, G.A.R. ., Harding, J.E, 2008,Interface Forces in Laterally Impacted Steel Tubes’, International Journal of Experimental Mechanics, Vol. 48(5), pp. 265–280.

Tofighi, M.A., Zeinoddini, M., Golshani, A.A., 2009, ‘Investigation into the flow stratification in the urmia lake using a 3d hydrodynamics flow model’ (in Persian), Modarres Technical and Engineering Scientific Research Journal, Vol. 35 pp. 65-76.

Zeinoddini, M. Tofighi M.A., Vafaee F., 2009,Evaluation of a dike type causeway impacts on the flow and salinity regimes in the urmia lake’, International Journal of Great Lakes Research, Vol. 35(1), pp 13-22.

Zeinoddini, M. and Nabipour M., 2009 A Numerical study on the pull-out behaviour of suction caissons" Iranian Journal of Marine Engineering Vol. 5 (9) pp. 1-16.

Zeinoddini, M. Keyvani, J. and Nabipour M., 2009, ‘Tapered suction caissons: a numerical investigation into their pull-out performance’, International Journal of China Ocean Engineering (ISI Index) Vol.23 No.4 (2009/12, pp: 695-707.

Sadrossadat S.M. and Zeinoddini, M., 2010 evaluation of added mass approach for predicting the response of offshore pipelines’ free spanning to severe excitations" (in Persian), Iranian Journal of Marine Engineering Vol. 5 (10) pp. 31-52.

Zeinoddini M., Mousavi B.S.A. and Hobbi D. and Nabipour M., 2010. “Inclined load bearing capacity of suction caissons embedded in sand” International Journal of Earth Sciences and Engineering Vol. 3 (04) pp. 563-571.

Kashefi, K., Zandi, A.P. and Zeinoddini, M., 2010, ‘Fatigue life evaluation through field measurements and laboratory tests’, Elsevier Journal of Procedia Engineering Vol. 2, Issue 1, April 2010, pp: 573-582

Zeinoddini, M. and Parke, G.A.R., 2011, ‘Elastic shakedown and adaptation of the response in laterally impacted steel tubes’, International Journal of Damage Mechanics, Vol. 20 No. 3 pp: 400-422.

Zeinoddini, M. Dabiri A. and Fakheri J., 2011, ‘A seismic analysis model for the evaluation of retrofitted old RC buildings’, Modares Civil Engineering Journal (M.C.E.L), Vol. 11 No. 1 pp:61-71 (in Persian).

Zeinoddini, M., Keyvani, J. and Nabipour M., 2011, ‘Wall slope effects on the vertical pull-out capacity of tapered suction caissons’, Elsevier Journal of Scientia Iranica, Transactions A: Civil Engineering, Vol.18, pp: 313-325.

Zeinoddini, M., Peykanu, M. and Abzal A., 2011, ‘3D surface acquisition and reconstruction for assessing the extent of strain ratcheting and wrinkling in steel tubulars’, Journal of Advanced Materials Research, Vols. 301-303, pp: 388-396.

Zeinoddini, M., and Peykanu, M., 2011, ‘Strain ratcheting of steel tubulars with a rectangular defect under axial cycling: A numerical modeling’, Journal of Constructional Steel Research, vol. 67 (12), pp. 1872-1883.

Zeinoddini, M. Ahmadpour F., and Matin Nikoo H. 2011. “Seismic assessment of gravity quaywall structures, subjected to nearfault ground excitations Elsevier Journal of Procedia Engineering Vol. 14 (2011) 3221–3228.

Arabzadeh, H. and Zeinoddini, M., 2011. “Dynamic response of pressurized submarine pipelines subjected to transverse impact loads” Elsevier Journal of Procedia Engineering Vol. 14 (2011) 648–655.

Zeinoddini, M. Mousavi B.S.A. and Abdi, M.R., 2011. “Simulation of suction caisson penetration in seabed using an adaptive mesh technique” Elsevier Journal of Procedia Engineering Vol. 14 (2011) 1721–1728.

Bakhtiari, A. and Zeinoddini, M., 2011 Wave-current coupling effects on flow and salinity circulations and stratification in saline basins" Elsevier Journal of Procedia Environmental Sciences, Vol 10. , pp: 1293-1301.

Peykanu, M. and Zeinoddini, M., Daghigh, M., 2011, ‘Local buckling of corroded tubular under cyclic compresion and tension loadings’, Modares Civil Engineering Journal (M.C.E.L), Vol. 11 No. 4, pp97-105 (in Persian).

Zeinoddini, M., Parke, G.A.R. and Sadrossadat S.M., 2012,‘Free-spanning submarine pipelines response to severe ground excitations: water/pipeline interactions, ASCE's Journal of Pipeline Systems- Engineering and Practice, 2012.3:135-149.

Zeinoddini, M., 2012,‘In-situ quasi-static and dynamic behavioural response of steel tubular frames subjected to lateral impact loads, Latin American Journal of Solids and Structures. Vol. 9 (2012) 383 – 400.

Davachi A.M. and Zeinoddini, M., 2012, ‘Seismic response of a multi-span pile and deck structure to near and far field horizontal excitations’, Modares Civil Engineering Journal (M.C.E.L) Vol. 12 Issue 2, pp 101:111 (in Persian).

Dabiri A. Zeinoddini, M. and Keyvani, J., 2012, ‘A fiber element model for seismic evaluation of old r.c. buildings’, Sharif Scientific Research Journal: Civil Engineering,Vol 27, pp 29:40.

Zeinoddini, M., Matin Nikoo, H., Estekanchi H., 2012, “Endurance wave analysis (EWA) and its application for assessment of offshore structures under extreme waves”, Journal of Applied Ocean Research Volume 37, August 2012, Pages 98-110.

Zeinoddini, M., and Hosseini, S.A. 2012 Modeling of I-shaped beam-to-tubular column connection subjected to post-fire conditions " the Life Science Journal, Vol. 9(4), pp: 387-399.

Zeinoddini, M. Hosseini S.A., Daghigh M. and Arnavaz S., 2013, ‘Structural post-fire behaviour of the steel I-shape beams-to-cylindrical columns’, Journal of Applied Mechanics and Materials, Vols. 249-250, pp: 284-290.

Zeinoddini, M. M., Arnavaz S. and Hosseini S.A., 2013, ‘Effects of repair weld on residual stress distributions in offshore pipelines’, Journal of Applied Mechanics and Materials, Vols. 249-250, pp 1057-1062.

Zeinoddini, M., Bakhtiari, A., and Ehteshami, M. 2013 Wave–flow coupling effects on spatiotemporal variations of flow and salinity in a large hypersaline marine system: Lake Urmia, Iran" Journal of Limnology, ISSN 1439-8621Vol. 14, Issue 1, pp 77-95.

Matin Nikoo, H., Zeinoddini, M., & Estekanchi, H. (2013). Probabilistic estimation of offshore jacket type platforms capacity using incremental random wave analysis (IRWA). International Journal of Maritime Technology, 8(16), 1-18 (in Persian).

Ezzati, M., Zeinoddini, M. (2013). An experimental/numerical study on the sensitivity of axial compressive load bearing response of steel tubular to geometrical imperfections. International Journal of Maritime Technology, 8(16), 95-1-5 (in Persian).

Bakhtiary, A. Zeinoddini, M., and Tofighi, M.A., 2013 Impacts of water inflow drop on the water elevation, morphology and the salinity regime in Lake Urmia" Iranian Journal of Hydraulic, 3 (6) (in Persian).

Zeinoddini, M., Arnavaz, S., Zandi, A. P., & Vaghasloo, Y. A. (2013). Repair welding influence on offshore pipelines residual stress fields: An experimental study. Journal of Constructional Steel Research, 86, 31-41

Arabzadeh, H., Zeinoddini, M. (2013). A closed-form solution for lateral indentation of pressurized pipes resting on a flexible bed. International Journal of Mechanical Sciences, 75, 189-199.

Zeinoddini, M., Arabzadeh, H., Ezzati, M., & Parke, G. A. R. (2013). Response of submarine pipelines to impacts from dropped objects: Bed flexibility effects. International Journal of Impact Engineering, 62, 129-141.

Zeinoddini, M., Tamimi, V., & Seif, M. S. (2013). Stream-wise and cross-flow vortex induced vibrations of single tapered circular cylinders: An experimental study. Journal of Applied Ocean Research, 42, 124-135.

Zeinoddini, M., & Hosseini, S. A. (2013). Fire response of externally stiffened steel I-beam-to-CHS welded connections: A numerical modelling. Journal of Constructional Steel Research, 89, 42-51.

Zeinoddini, M., Nikoo, H. M., and Ahmadpour, F. (2013). A coupled soil-fluid-structure simulation of the near-field earthquake effects on gravity type quay-walls. China Ocean EngineeringJournal, 27(4), 481-494.

Zeinoddini, M., & Dabiri, A. (2013). “Seismic analytical model for retrofitted old reinforced concrete structures. Procedia Engineering, 54, 188-206.

Zeinoddini, M., Bakhtiary, A. and Tofighi, M.A., 2013 2DH and pseudo-3D modelling of water/salinity circulations in a large shallow hyper saline aquatic ecosystem" Hydrological Processes Journal.

Hosseini, S. A., Zeinoddini, M., Saedi Daryan, A., & Rahbari, M. (2014). Model fire tests on a beamtoleg connection in an offshore platform topside. Journal of Fire and Materials. 38(5), 529-549.

Peykanu, M. Zeinoddini, M., Motamedi, M., 2014, ‘Experimental modelling of local bucklinig in corroded offshore pipelines under axial cyclic loadings’ Sharif Scientific Research Journal: Civil Engineering 2-29, 4, pp17-24 (in Persian).

Tamimi, V., Zeinoddini, M., & Bakhtiari, A. (2014). Vortex Shedding Characteristics of Tapered Cylinders at Turbulent Wake. Journal of Offshore Structure and Technology, 1(1), 25-38.

Zeinoddini, M., Hossini, S. A., & Nikoo, H. M. (2014). Performance of Offshore Steel Jacket Platforms under Near-source Ground Motion Type Pulses. Journal of Structural Engineering and Management, 1(1), 37-51.

Matin Nikoo, Zeinoddini, M., H., Estekanchi H. and.Enderami S.M., 2014, “Application of endurance time method in design and assessment of offshore structures subjected to irregular waves”, Sharif Scientific Research Journal: Civil Engineering 2-30, 1/1, pp109-118 (in Persian).

Zeinoddini, M., Tamimi, V., Bakhtiari, A. (2014). WIV response of tapered circular cylinders in a tandem arrangement: An experimental study. Journal of Applied Ocean Research 47 pp162–173.

Zeinoddini, M., Ezzati, M., and Fakheri J. (2014). Uniaxial Strain Ratcheting Behavior of Dented Steel Tubular: An experimental study. International Journal of Engineering Failure Analysis, 44 pp 202–216.

Zeinoddini, M., Hosseini, S. A., Bahaari M.R. (2014). Study of Stiffness Variation of Oil Platform Decks Connections in Fire. Journal of Iranian Society of Steel Structures, 9-13, pp: 19-29 (in Persian).

Zeinoddini, M., Kakasoltani, S., Abdi, M. R., & Ahmadi, I. (2014). Model testing of upright and tapered suction caissons in sand. Ships and Offshore Structures, Vol. 12, 1-14.

Hosseini, S. A., Zeinoddini, M., Darian, A. S. (2014). Modelling of I-shaped beam-to-tubular column connection subjected to post-fire conditions. International Journal of Steel Structures, 14(3), 513-528.

Zeinoddini, M., Bakhtiari, A., and Ehteshami, M. (2015) Long-term impacts from damming and water level manipulation on flow and salinity regimes in Lake Urmia-Iran " Water and Environment Journal, 29 71–87

Zeinoddini, M., Ranjbar, P., Khalili, H., Ranaei, A., Golpour, H., & Fakheri, J. (2015). Remaining fatigue life assessment of aging fixed steel offshore jacket platforms. Structure and Infrastructure Engineering, 1-16.

Ezzati M, Zeinoddini M, Masoudi T., )2015 (Assessment of Force-Deflection Relations of Steel Tubular Members under Lateral Quasi-Static Impacts from Dropped Objects. Journal of Maritime Technology, 3. 10 (20) :79-88 (in Persian)

&   Conference Papers:

Zeinoddini, M., Harding, J.E. and Parke, G.A.R., 1998, Structural safety of oil and gas platforms subjected to a ship collision’, Proceeding of 9Th Annual Oil, Gas and Petro-Chemistry Conference, Tehran, Iran Sept. Vol. 1, pp. 75-90.

Zeinoddini, M., 1998, Propagation of dynamic instability in members of offshore structures subjected to ship impact’, 4th Technical Seminar of the Iranian Students in the Europe, London, UK, July 1998.

Zeinoddini, M., 1999, ‘In-frame response of steel tubular members subjected to quasi-static and dynamic lateral impacts’, 5th Technical Seminar of the Iranian Students in the Europe, Manchester, UK, May 1999.

Zeinoddini, M., Harding, J.E. and Parke, G.A.R., 1999, ‘dynamic characteristics of axially pre-loaded steel tubes subjected to lateral impacts’, The European Steel Design Conference, Prague, May 25-28.

Zeinoddini, M., Parke, G.A.R., Keyvani, J. and Disney, P. 2002, Snap through study of the J.W.Marriot space structure dome’, 5th International Conference on Space Structures, 19-21 Agu. Guildford, UK.

Zeinoddini, M., Nabipour, M. and Abdi, M., 2006, “Modes of failure for suction caissons under vertical pull-out loads” 25th International Conference on Offshore Mechanics and Arctic Engineering OMAE2006-92239, June 4-9, Hamburg, Germany.

Zeinoddini, M. and Nabipour M. 2006 “Numerical investigation on the pull-out behaviour of suction caissons in clay”, 25th International Conference on Offshore Mechanics and Arctic Engineering OMAE2006-92058, June 4-9, Hamburg, Germany.

Zeinoddini, M., Nabipour M. and Mirtaheri, M., 2006. “A parametric study on the pull-out behaviour of tapered suction caissons in clay Part I: Soil parameters ” The Tenth East Asia-Pacific Conference on Structural Engineering and Construction, August 3-5, Bangkok, Thailand.

Zeinoddini, M., Nabipour M. and Mirtaheri, M., 2006. “A parametric caisson geometry parameters study on the pull-out behaviour of tapered suction caissons in clay Part II: Caisson geometry parameters” The Tenth East Asia-Pacific Conference on Structural Engineering and Construction, August 3-5, Bangkok, Thailand.

Bakhtiary, A. Zeinoddini, M., and Ebranimi Torkamani, A. ,2009 “An Investigation to the wave current interaction in shallow coastal waters" (in Persian), 7th Iranian Hydraulic Conference Iranian Hydraulic Association , 1-3 December 2009, Power & Water University of Technology, Tehran, Iran.

Nabipour M. and Zeinoddini, M., 2007 “Failure modes of tapered suction caissons under vertical pull-out loads”, 26th International Conference on Offshore Mechanics and Arctic Engineering OMAE2007-29490, 10-15 June, San Diego, USA.

Zeinoddini, M., Maryam Abdolvahab, M. and Keyvani, J., 2007 “Preloading effects on the behaviour of cylindrical members of jacket platforms subjected to ship impact ”, 26th International Conference on Offshore Mechanics and Arctic Engineering OMAE2007-29476, 10-15 June, San Diego, USA.

Zeinoddini, M., Nabipour M. and Keyvani, J., 2007 “Numerical investigation on tapering effects on the pull-out capacity suction caissons in clay ”, The Proceedings of The 17th International Offshore and Polar Engineering Conference July 1-6, 2007, Lisbon, Portugal, pp1410-15.

Zeinoddini, M., and Nabipour M., 2007,‘Suction caissons: An appropriate solution for the anchorage and the foundations of offshore structures, (in Persian), The 9th Conference on Offshore Industries,, Noor, Mazandaran, Iran, 2007 Oct. 23-25.

Zeinoddini, M., Shariati W. H., Nabipour M. and Parchami, F., 2008, ‘A parametric study on the installation of tapered suction caissons in clay, The 18th International Offshore and Polar Engineering Conference ISOPE2008, Vancouver, Canada,, July 6-11, 2008.

Zeinoddini, M., Shariati W. H. and Nabipour M., 2008,‘Tapering effects on the installation of suction caissons in clay, The ASME 27th International Conference on Offshore Mechanics and Arctic Engineering OMAE2008, Estoril, Portugal, June 15-20, 2008.

Zeinoddini, M., Shariati W. H. and Nabipour M., 2008,‘Numerical investigation on parameters influencing the installation of suction caissons in undrained sand, The ASME 27th International Conference on Offshore Mechanics and Arctic Engineering OMAE2008, Estoril, Portugal, June 15-20, 2008.

Zeinoddini, M., Saeidi B. and Parke, G.A.R., 2008,‘The feasibility of a suction caisson solution for the foundations of the offshore jacket platforms in the Persian Gulf, The ASME 27th International Conference on Offshore Mechanics and Arctic Engineering OMAE2008, Estoril, Portugal, June 15-20, 2008.

Alimoradi, E., Zandi, A.P. and Zeinoddini, M., 2008,‘Monitoring the structural behaviour of the Izadkhost bridge-iran during deck launching, (in Persian), 3rd International Bridge Conference, AmirKabir University, Tehran, Iran, 26-28 May 2008.

Zeinoddini, M., Sadrossadat S.M. and Parke, G.A.R., 2008,‘Three-dimensional nonlinear seismic analysis of free spanning submarine pipelines using finite element model: effects of pipe-water interaction, The ASME 27th International Conference on Offshore Mechanics and Arctic Engineering OMAE2008, Estoril, Portugal, June 15-20, 2008.

Zeinoddini, M, 2008,‘Technical lessons from the design and construction phases of the Urmia Lake crossing bridge", Conference on Design and Construction of Large Bridges, Shiraz, Iran, July, 23, 2008.

Alimoradi, E., Zeinoddini, M. and Zandi, A.P., 2008,‘Deck launching of the IzadKhost Bridge-Ira, Stress measurement and monitoring", Conference on Deseign and Construction of Large Bridges, Shiraz, Iran, July, 23, 2008.

Zeinoddini, M. Hobbi, D. and Nabipour, M., 2008. “A numerical investigation on the behaviour of suction caissons under inclined loads” The 11th East Asia-Pacific Conference on Structural Engineering & Construction, EASEC-11, 19-21 November, 2008, Taipei, Taiwan.

Zeinoddini, M. and Hosseini, S.A., 2008. “Assessment of seismic behaviour of jacket offshore platform in near-field earthquakes” The 11th East Asia-Pacific Conference on Structural Engineering & Construction, EASEC-11, 19-21 November, 2008, Taipei, Taiwan.

Motamedi, M., Zeinoddini, M. and Gazavi, M., 2009. “Ultimate load bearing capacity of upright, tapered and stepping piles subject to a concentrated horizontal load at pile cap” The 8th International Congress on Civil Eng., 11-13 May, 2009, Shiraz, Iran.

Zeinoddini M., Hobbi D. and Mousavi B.S.A, 2009. “Numerical simulation of suction caissons response under inclined pull-out” The 8th International Congress on Civil Eng., 11-13 May, 2009, Shiraz, Iran.

Zeinoddini M., Mousavi B.S.A. and Hobbi D., 2009. “Inclined load bearing capacity of suction caissons embedded in sand” The International Conference on Advances in Concrete, Structural, and Geotechnical Engineering, ACSGE 2009, Pilani, India, October 25-27.

Zeinoddini, M. Hobbi, D. and Nabipour, M., 2009. “Behaviour of tapered suction caissons in sand under inclined pull-out loading” The International Conference on Advances in Concrete, Structural, and Geotechnical Engineering, ACSGE 2009, Pilani, India, October 25-27.

Zeinoddini M., Mousavi B.S.A. and Hobbi D., 2009. “A numerical study into the behaviour of suction caissons under inclined loads” (in Persian), The 8th International Civil Engineering Congress, 8ICCE, Shiraz, Iran, May 10-12.

Motamedi, M., Zeinoddini, M. and Ghazavi, M., 2009. “A comparisson between ultimate lateral resistance of cylindrical piles, tapered piles and stepping piles with identical volumes against a concentrated horizontal load at pilecap” (in Persian), The 8th International Civil Engineering Congress, 8ICCE, Shiraz, Iran, May 10-12.

Bakhtiary, A. Zeinoddini, M., and Ehteshami, M., 2010 Environmental impacts from the shahid kalantari causeway on the urmia lake-iran" (in Persian), Second International Symposium on Environmental Engineering (ISOEE-2), Tehran, Iran, 19-21 January 2010.

Kashefi, K., Zeinoddini, M. and Zandi, A.P. 2010, ‘Assessment of remaining fatigue life of aging orthotropic steel deck bridges’, 5th International Conference on Bridge Management and Maintenance, IABMAS 2010 Philadelphia, June 2010.

Kashefi, K., Zandi, A.P. and Zeinoddini, M., 2010, ‘Fatigue life evaluation through field measurements and laboratory tests’, 10th International Fatigue Congress, June 6-11, 2010 Prague, Czech Republic.

Kashefi, K., Zandi, A.P. and Zeinoddini, M., 2010, ‘Assessment of the Fatigue Life of Tehran Orthotropic Steel Bridges’, 5th Civil Eng. National Congress, May 4-6, 2010 Mashad.

Arabzadeh, H. and Zeinoddini, M., 2010, ‘Response of internally pressurized tubulars to lateral impact- soil bed effects’, 5th Civil Eng. National Congress, May 4-6, 2010 Mashad.

Arabzadeh, H. and Zeinoddini, M., 2010, ‘Dynamic analysis of tubular members under lateral impacts and internal fluid pressure’, 5th Civil Eng. National Congress, May 4-6, 2010 Mashad.

Kakasoltani, S. Zeinoddini, M., Abdi, M.R. and Mousavi B.S.A., 2010, On penetration of upright and tapered suction caissons in sand - An experimental study, The ASME 29th International Conference on Offshore Mechanics and Arctic Engineering OMAE2010, Shanghai, China, June 6-11, 2010.

Enderami S.M., Zeinoddini, M., Shabakhty N. and Ameryoun H., 2010, Dynamic non-linear analysis of offshore jacket type platforms under extreme wave loads, The ASME 29th International Conference on Offshore Mechanics and Arctic Engineering OMAE2010, Shanghai, China, June 6-11, 2010.

Golestani M., Zeinoddini, M., Mazaheri M. , 2010, Prediction of wave parameters using support vector regression method’, The 9th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2010) Tehran, Iran, 29 Nov.-1 Dec. 2010.

Arabzadeh H., Zeinoddini, M., 2010,Lateral impact on pressurized and continuously supported offshore pipelines’, The 9th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2010) Tehran, Iran, 29 Nov.-1 Dec. 2010.

Zeinoddini, M. Mousavi B.S.A. and Abdi, M.R., 2011. “Three dimensional simulation of suction caisson installation in sand” The 12th East Asia-Pacific Conference on Structural Engineering & Construction, EASEC-12 January 2628, 2011, Hong Kong SAR, China

Arabzadeh, H. and Zeinoddini, M., 2011. “Dynamic response of pressurized submarine pipelines subjected to transverse impact loads” The 12th East Asia-Pacific Conference on Structural Engineering & Construction, EASEC-12 January 2628, 2011, Hong Kong SAR, China

Zeinoddini, M. Ahmadpour F., and Nikoo H.M. 2011. “Seismic assessment of gravity quaywall structures, subjected to nearfault ground excitations The 12th East Asia-Pacific Conference on Structural Engineering & Construction, EASEC-12 January 2628, 2011, Hong Kong SAR, China

Nikoo Matin H., Zeinoddini, M. and Enderami S.M., 2011. “Non-linear dynamic response assessment of offshore platforms using a constrained new wave and endurance time method” The 4th National Conference on Offshore Industries, OIC2011, May 1617, 2011, Sharif University, Tehran, Iran (in Persian).

Davachi Omumi, A.M. and Zeinoddini, M., 2011. “Effect of asynchronous earthquake motion on the seismic response of a deck and pile offshore terminal” The 4th National Conference on Offshore Industries, OIC2011, May 1617, 2011, Sharif University, Tehran, Iran (in Persian).

Kakasoltani, S. Zeinoddini, M., Abdi, M.R. and Arabzadeh H., 2011, An experimental investigation into the pull-out capacity of suction caissons in sand, The ASME 30th International Conference on Offshore Mechanics and Arctic Engineering OMAE2011-49038, Rotterdam, the Netherlands, June 19–24, 2011.

Enderami S.M., Zeinoddini, M. and Kakasoltani, 2011,‘Fast prediction of fixed offshore jacket platforms response to random wave loads, The ASME 30th International Conference on Offshore Mechanics and Arctic Engineering OMAE2011-50251, Rotterdam, the Netherlands, June 19–24, 2011.

Arabzadeh H., Zeinoddini, M., Kakasoltani, S., 2011, Subsoil contribution to dynamic behavior of offshore pipelines to impacts from dropped objects, The ASME 30th International Conference on Offshore Mechanics and Arctic Engineering OMAE2011-49819, Rotterdam, the Netherlands, June 19–24, 2011.

Bakhtiari, A. and Zeinoddini, M., 2011 “Wave-current coupling effects on flow and salinity circulations and stratification in saline basins" 3rd International Conference on Environmental Science and Information Application Technology, ESIAT 2011 - Xi'an, China, Aug. 18~19 2011.

Golestani M. and Zeinoddini, M., 2011,‘Gap-filling and predicting wave parameters using support vector regression method, The ASME 30th International Conference on Offshore Mechanics and Arctic Engineering OMAE2011-49814, Rotterdam, the Netherlands, June 19–24, 2011.

Firouzi V., Aghakouchak A. M. and Zeinoddini, M., 2011,‘Nonlinear dynamic analysis of jacket platforms due to ship impact, The 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+) Seoul, Korea, 18-22 September, 2011.

Hosseini, SA and Zeinoddini, M., 2012,‘Measures to improve the fire performance of an I-beam to a CHS column, The 3rd National Conference on Structures and Steels, Tehran, Iran, 24-25 December, 2012 (in Persian).

Hosseini, SA and Zeinoddini, M. Bahaari, MR, 2012, Fireproofing Effects of I Section Beam-to-CHS Column Connections Behaviour in Oil Platform Decks at Elevated Temperature, The 3rd National Conference on Structures and Steels, Tehran, Iran, 24-25 December, 2012 (in Persian).

Hosseini, SA and Zeinoddini, M. Saedi Daryan A., Bahaari, MR, 2012, Fire Effect on Behaviour of I shape Beam-to-Pipe Column Connections in Oil Platform Decks, The 3rd National Conference on Structures and Steels, Tehran, Iran, 24-25 December, 2012 (in Persian).

Matin Nikoo H., Zeinoddini M., Estekanchi H. and Golestani M., 2012Integrating constrained random waves in endurance time analysis of offshore structures subjected to sea waves’, The ASME 31th International Conference on Offshore Mechanics and Arctic Engineering OMAE2012-84111, Rio de Janeiro, Brazil, July 1-6, 2012.

Tamimi V., Zeinoddini M., Bakhtiary A. and Golestani M., 20123D simulation of vortex shedding pass tapered circular cylinders in subcritical Reynolds numbers’, The ASME 31th International Conference on Offshore Mechanics and Arctic Engineering OMAE2012-84126, Rio de Janeiro, Brazil, July 1-6, 2012.

Golestani M. and Zeinoddini, M., 2012Wave data assimilation using Support Vector Regression (SVR) model and Ensemble Kalman Filter (EnKF)’, The ASME 31th International Conference on Offshore Mechanics and Arctic Engineering OMAE2012-83873, Rio de Janeiro, Brazil, July 1-6, 2012.

Goelstani, M. Zeinoddini M. & Rad, M. 2012, A feasibility study of offshore wind turbine farms in Iranian Southern waters, The 10th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012) Tehran, Iran, Nov. 19-21 2012.

Goelstani, M. Zeinoddini M. 2012, Prediction of wave parameters using support vector regression method, The 10th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012) Tehran, Iran, Nov. 19-21 2012.

Zeinoddini, M. Ahmadpour F., and Nikoo H.M., 2012, Seismic Evaluation of Gravity Quay-Wall Structures, Subjected to Near- Fault Ground Excitations, The 10th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012) Tehran, Iran, Nov. 19-21 2012.

Tamimi V., Zeinoddini M., Seif M.S. , 2012, Experimental study of WIV of uniform cylinders in tandem arrangement’, The 9th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012) Tehran, Iran, 19-21 Nov. 2012.

Zeinoddini M., Tamimi V. and Shahvaghar- Asl S. , 2012, A comparison between 3D LES of vortex shedding of uniform and tapered cylinders in subcritical Reynolds number’, 10th International Congress on Advances in Civil Engineering, 17-19 October 2012 Middle East Technical University, Ankara, Turkey.

Matin Nikoo, H., and Zeinoddini, M. 2012, “Probabilistic ultimate strength evaluation of the steel Jacket platforms using IRWA (Incremental Random Wave Analysis)”, 14th Marine Industries Conference (MIC2012) 26 to 27 Dec. 2012- Tehran-Iran (in Persian).

Hosseini, S.A. and Zeinoddini, M., 2012Numerical modeling of the fire behavior of steel I-beam to cylindrical chord connections in the offshore structures topsides”, 14th Marine Industries Conference (MIC2012) 26 to 27 Dec. 2012- Tehran-Iran (in Persian).

Ezzati, M., and Zeinoddini, M. 2012, “Experimental evaluation of the API load-denting equations for steel tubulae members of offshore structures”, 14th Marine Industries Conference (MIC2012) 26 to 27 Dec. 2012- Tehran-Iran (in Persian).

Ezzati, M., and Zeinoddini, M. 2012, “Effects of geometrical imperfections on the axial compressive monotonic loading response of steel tubular members in offshore structures”, 14th Marine Industries Conference (MIC2012) 26 to 27 Dec. 2012- Tehran-Iran (in Persian).

Golbaz,A., Golpour H. and Zeinoddini, M. 2012, “Structural integrity assessment of an aging steel jacket platform for service life extension”, 14th Marine Industries Conference (MIC2012) 26 to 27 Dec. 2012- Tehran-Iran (in Persian).

Tamimi V., Zeinoddini M., Seif M.S. , 2012, WIV of two tapered circular cylinders in tandem arrangement’, 14th Marine Industries Conference (MIC2012) 26 to 27 Dec. 2012- Tehran-Iran.

Arnavaz Yamchi S., Zeinoddini M. and Kazembakhshi S. 2012, "Adverse effects of the repair weld on the structural integrity and the residual stress fields in the oil/gas pipelines", 3rd International Conference on Materials Heat Treatment (ICMH 2012), Isfahan, Iran May, 2012.

Arnavaz Yamchi S., Zeinoddini M. and Kazembakhshi S. 2012, "Decrease of inappropriate effects of repair weld by means of heat treatment method", 3rd International Conference on Materials Heat Treatment (ICMH 2012), Isfahan, Iran May, 2012.

Zeinoddini, M. Hosseini S.A., Daghigh M. and Arnavaz Yamchi S., 2013, ‘Structural Post-fire Behaviour of the Steel I-Shape Beams-to-Cylindrical Columns’, 2nd International Conference on Materials Engineering for Advanced Technologies (ICMEAT 2012), Xiamen, China December 27-28, 2012.

Zeinoddini, M. M., Arnavaz Yamchi S. and Hosseini S.A.,, 2013, ‘Effects of repair weld on residual stress distributions in offshore pipelines’, 2nd International Conference on Materials Engineering for Advanced Technologies (ICMEAT 2012), Xiamen, China December 27-28, 2012.

Serpoushan, N., Zeinoddini, M. and Golestani M., 2013An ensemble Kalman filter data assimilation scheme for modeling the wave climate in Persian Gulf’, The ASME 32nd International Conference on Offshore Mechanics and Arctic Engineering OMAE2013-10399, Nantes, France, June 9 to 14.

Golpour, H., Zeinoddini, M., Khalili, H., Golbaz, A., Yaghubi, Y., Adl, M. R., ... & Nikoo, H. M. (2013). Structural integrity assessment of aging fixed steel offshore jacket platforms: A Persian Gulf case study. The ASME 32nd International Conference on Offshore Mechanics and Arctic Engineering OMAE2013-10712, Nantes, France, June 9 to 14.

Zeinoddini M., Tamimi V., Maleki Sh., Shahvaghar-Asl S., Bakhtiari A., 2013Experimental study of VIV of single tapered circular cylinders’, The ASME 32nd International Conference on Offshore Mechanics and Arctic Engineering OMAE2013-11146, Nantes, France, June 9 to 14.

Beglari, N., Shabakhti, N., Zeinoddini, M., (2014), A review of the Fracture Mechanics Approach to Fatigue Assessment of Steel Structures, The 8th National Congress on Civil Eng., 7-8 May 201`4 Babol, Noshirvani University of Technology,

Farhangmehr, A. Zeinoddini, M., Zandi, A.P., Seif, M. Ansari, P., Vortex-Induced Vibration of an Inclined Cylinder, The 11th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2014) Tehran, Iran, 24-26 November 2014.

Ebrahimi, M. Zeinoddini, M. Zandi, A.P., Arnavaz, S., Ansari, P., Effect of hammer peening on fatigue life of repair welded offshore steel pipe lines., The 11th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2014) Tehran, Iran, 24-26 November 2014.

&   Technical Reports:


 

Zeinoddini, M., 1997, ‘A Literature Review on the Dynamic Aspects of Ship-Offshore Collision’, Technical Report No. 15, Feb97, Department of Civil Eng. University of Surrey, UK, Feb. 1997.

Zeinoddini, M., 1997, ‘Behaviour of Cylindrical Members Under Ship Impact , Technical Report No. 20, May97, Department of Civil Eng. University of Surrey, UK, May. 1997.

Zeinoddini, M., 1997, ‘Dynamic Aspects of Ship Offshore Collisions, Technical Report No. cvp43-Jul97, Department of Civil Eng. University of Surrey, UK, Jul. 1997.

Zeinoddini, M., 2002, ‘Notes for Launching and Development of Web-Based Higher Educations in the Country’, Technical Report, In Persian, Higher Education Development Office, Ministry of Science, Research and Technology, April 2002.

Zeinoddini, M.,  2005, ‘Dynamic Analysis of Suction Caissons under Cyclic Pull-out Loads’, Technical Report, In Persian, Faculty of Civil Engineering, KNT University of Technology.

Zeinoddini, M., 2007, ‘An Study into the Installation Phase of the Tapered and Upright Suction Caissons’, Technical Report, In Persian, Faculty of Civil Engineering, KNT University of Technology.

Zeinoddini, M., 2008, ‘Behaviour of Suction Caissons under Inclined Pull-out Loads’, Technical Report, In Persian, Faculty of Civil Engineering, KNT University of Technology.

Zeinoddini, M., 2008, "Seismotectonics and Seismic Hazard Analysis for the Iranian Senate Parliament", Technical Report, In Persian, Faculty of Civil Engineering, KNT University of Technology.

Zeinoddini, M., 2009, "Seismic Assessment of the Iranian Senate Parliament", Technical Report, In Persian, Faculty of Civil Engineering, KNT University of Technology.

Zeinoddini M., Motamedi M., 2009, "Development of Hole-Drilling Method for in-Situ Measurement of Existing Loads and Stresses in Offshore Steel Platform Components", Technical Report, In Persian, Faculty of Civil Engineering, KNT University of Technology.

&   Research Projects:


Zeinoddini, M., 2013, "Side Effects of Repair Welding on the Structural Integrity of Offshore Pipelines", INSF-Iran National Science Foundation.

Zeinoddini, M., 2010, “A Feasibility Study on Wave Forecasting in Iranian Seas”, Iranian Ports and Maritime Organization PMO/KNTU Research Contract, Iran.

Zeinoddini, M., 2008, “Development of Semi-Destructive Hole-Drilling Method for In-Situ Measurement of Existing Loads in the Offshore Steel Rigs Components, Pars Oil and Gas Company”, POGC/KNTU Research Contract, Iran.

Zeinoddini, M., 2008, “Dynamic tests on the Iranian Senate Parliament (Madjles Shouraye Eslami)”, Ministry oh Housing/KNTU Research Contract, Iran.

Zeinoddini, M., 2008, ‘Behaviour of Suction Caissons under Inclined Pull-out Loads’, KNTU Research Contract.

Zeinoddini, M., 2007, "Seismotectonics and Seismic Hazard Analysis for the Iranian Senate Parliament", (Madjles Shouraye Eslami)”, Ministry oh Housing/KNTU Research Contract, Iran.

Zeinoddini, M., 2007 ‘An Study into the Installation Phase of Tapered and Upright Suction Caissons’, KNTU Research Contract.

Zeinoddini, M., 2006, “Retrofit Design of 300 Residential Buildings Damaged during the March 2006 Earthquake in Brojerd-Iran”, Bonyad Maskan Enghelab Eslami, KNTU Research Contract, Iran.

Zeinoddini, M., 2005, “Dynamic Behaviour of the Suction Caissons in Marine Applications under Cyclic Loads”, KNTU Research Contract.

Zeinoddini, M., 2004, “Seismic Assessment of Iranian Senate Parliament (Madjles Shouraye Eslami)”, Ministry oh Housing /KNTU Research Contract, Iran.

Parke, G.A.R., Zeinoddini, M. and Disney, P., 1999, “Stability Study of Marriot Hotel Space Dome”, UNIS Research Contract, Iran.

Savory, E., Parke, G.A.R., Zeinoddini, M., Toy, N. and Disney, P., 1998,Modelling of Tornado and Microburst-Induced Wind Loading and Failure of a Lattice Transmission Towers”, UNIS Research Contract, UK.

&   Editorial Board:

Iranian Journal of Marine Engineering

International Journal of Maritime Technology

Journal of Offshore Structures and Technology

Journal of Structural Engineering and Management

International Journal of Computer Science and Application

&   Reviewer for:


Journal of Engineering Structures-Elsevier

Dynamics of Atmospheres and Oceans, Elsevier

International Journal of Impact Engineering –Elsevier

ASCE's Journal of Pipeline Systems - Engineering and Practice

Latin American Journal of Solids and Structures

International Journal of Maritime Technology

Iranian Journal of Marine Engineering

Journal of Transportation Research

Iranian Hydraulic Journal

Modarres Technical and Engineering Scientific Research Journal

Esteghlal Engineering Journal-Technical University of Isfahan

Fanni Journal- Faculty of Engineering-University of Tehran

&   Supervised Thesis and Research Works (not an inclusive list):


§  Numerical Modelling of the Flow in Urmia Lake for Optimizing Location(S) & Span(S) of the Waterway Bridges;

§  Pull-out Response of Suction Caissons;

§  Dynamic Behaviour of Offshore Jacket Type Platforms under Ship Impacts;

§  Numerical Investigation on Parameters Influencing Penetration of Suction Caissons into the Seabed:

§  Parametric Studies on the Behaviour of Axially Pre-Loaded Tubular Members of Offshore Platforms Subjected to Lateral Impacts;

§  In-situe Vortex Shedding Response of Free Spanning Marine Pipelines;

§  Seismic Response of Free Spanning in Submarine Pipelines;

§  In Place Analysis of Jacket Type Offshore Platforms with Suction Caisson Foundations;

§  Behaviour of Jacket Platforms under Near Field Earthquakes;

§  Near Field Effects on the Seismic Response of Coastal Structures;

§  Quasi-Static & Dynamic Responses of Jacket Platforms Subjected to a Ship Impact;

§  Environmental Actions on Offshore Wind Turbines;

§  Experimental Investigation into the Pull-out Behaviour of Suction Caissons;

§  Utilizing the Hole Drill Method for the Measuring the Existing Loads on the Structural Members of Offshore Jacket Structures;

§  An Adaptive Mesh Scheme for Modeling Suction Caissons Penetration

§  Simulations of the Flow in the Urmia Lake Considering the Interaction of the Wave and Current;

§  The NewWave Method for Dynamic Analysis of Offshore Jackets Under Extreme Environmental Loads;

§  Field Measurements and Monitoring the Structural Behaviour of Bridge Girders During Deck Launching

§  Seismic Assessment of Old Concrete Structures with smooth reinforcements;

§  Measurement of Remaining Fatigue Life of Aging Steel Bridges and Mitigation Measures for Improving Their Fatigue Life;

§  Near Fault Wave Passage Effects on Pile and Deck Marine Structures;

§  Buckling of Corroded Submarine Pipelines Subject to High Pressure/Temperature Cycles;

§  Analysis of Jacket Type Offshore Platforms Including Damaged Members and Evaluation of Repair and Strengthening Techniques;

§  Behaviour of Internally Pressurized Pipelines Subjected to Lateral Impacts.

§  Behaviour of Steel Jacket Platforms in Fire;

§  Repair Weld Effects on the Integrity of High Strength Offshore Steel Components;

&   Examiner for Thesis and Research Works (not an inclussive list):


§  Developing an Unstructural Finite Volume Numerical Model for Marine Flows with combining two and three Dimensional Meshing.

§  Effects from Geometrical Shapes, Bracings and Hydrodynamic Interactions on the Semi-Submersible Platforms response;

§  Influence of Wave Characteristics on Wave Reflection from Dynamically Stable Reshaping Berm Breakwaters.

§  Optimization of Leg's Batter in Fixed Offshore Platforms.

§  Numerical Modelling of Offshore Platforms Lunching;

§  Tsunami Hazard Assessment for Southern Coasts of Iran Using Numerical Modelling;

§  Development of a Finite Volume Unstructured Mesh Model for the Ocean Currents on Irregular Beds with Combination of Two and Three Dimensional Grids (PhD thesis);

§  Fatigue Induced Damages during S-laying of Offshore Pipelines;

§  Assessment of Jacket Type Offshore Platforms Subjected to Loading Considering Ultimate Strength;

§  Incremental Dynamic Analysis of Jacket Type Offshore Platforms Considering Pile-Soil-Structure Interaction

§  Investigation of Durability in Light Weight Concrete Made of Iranian LECA in Comparison with Normal Concrete;

§  Study of Crenulate Shaped Bays in Sistan & Baloochestan – Case Study of Beris Fishing Port;

§  Study of Non-Linear Dynamic Behaviour of a Typical Jacket Platform under Blast Overpressure, Wave and Current;

§  Ship Impact Effects on Fixed Offshore Platforms;

§  Behaviour of Buried Large Flexible Water Supply Pipelines;

§  Seismic Behaviour of Concrete Reinforced Silos.

&   Awards


Khajeh Nasir Toosi University of Technology (KNTU) 2009, Distinguished Researcher Award

Khajeh Nasir Toosi University of Technology (KNTU) 2012, Distinguished Researcher Award

&   Workshops:


Zeinoddini, M., 2004, Design and Construction of Offshore Platforms 13-14 July 2004, Iran National Center of Oceanology.

Zeinoddini, M., Zandi, A.P., Dabiri, A., 2011, "Seismic Evaluation and the Retrofit Measures for the Masonry, Steel and Concrete Buildings" A One Day Workshop for the Members of Engineering Organization, and the Housing Foundation, 29 Sept. 2011, Dorood, Iran.

 

 

 

 

 

This site was last updated 07/02/12