Books
- Shariyat M. Automotive Body: Design and
Analysis, K.N. Toosi University Press, 2006.
Full lenght Journal papers
1- Eslami MR, Shariyat M. Third order finite element analysis of shell of revolution. International Journal of Engineering Analysis and Design, 1995; 10.
2- Eslami MR, Shariyat M. A technique to distinguish the primary and secondary stresses. Transactions of the ASME, Journal of Pressure Vessel Technology 1995; 117(3): 197-203.
3- Shariyat M, Eslami MR. Isoparametric finite-element thermoelasto-plastic creep analysis of shells of revolution. International Journal of Pressure Vessels and Piping 1996;68(3):249-259.
4- Eslami MR, Shariyat M. Elastic, plastic, and creep buckling of imperfect cylinders under mechanical and thermal loading. Transactions of the ASME, Journal of Pressure Vessel Technology 1997:119(1):27-36.
5- Eslami MR, Shariyat M, Shakeri M. Layerwise theory for dynamic buckling and postbuckling of laminated composite cylindrical shells. AIAA Journal 1998;36:1874-1882.
6- Eslami MR, Shariyat M. A higher order theory for dynamic buckling and postbuckling analysis of laminated cylindrical shells. Transactions of the ASME, Journal of Pressure Vessel Technology 1999;121:94-102.
7- Shariyat M, Eslami MR. Dynamic buckling and postbuckling of imperfect orthotropic cylindrical shells under mechanical and thermal loads, based on the three dimensional theory of elasticity. Transactions of the ASME, Journal of Applied Mechanics 1999;66:476-484.
8- Shariyat M, Eslami MR. Closure to discussion on paper: Dynamic buckling and postbuckling of imperfect orthotropic cylindrical shells under mechanical and thermal loads based on the three dimensional theory of elasticity. Transactions of the ASME, Journal of Applied Mechanics 1999;66:21.
9- Shariyat M, Eslami MR. On thermal dynamic buckling analysis of imperfect laminated cylindrical shells. ZAMM 2000;80:171-182.
10- Shariyat M. Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory. Thin-Walled Structures 2007;45:439-452.
11- Shariyat M. A fatigue model developed by modification of Gough's theory, for random non-proportional loading conditions and three-dimensional stress fields. International Journal of Fatigue 2008;30:1248-1258.
12- Shariyat M. Dynamic thermal buckling of suddenly heated temperature-dependent FGM cylindrical shells, under combined axial compression and external pressure. International Journal of Solids and Structures 2008;45:2598-2612.
13- Shariyat M. Dynamic buckling of suddenly loaded imperfect hybrid FGM cylindrical shells with temperature-dependent material properties under thermo-electro-mechanical loads. International Journal of Mechanical Sciences 2008;50:1561-1571. (Hot paper)
14- Shariyat M. Dynamic buckling of imperfect laminated plates with piezoelectric sensors and actuators subjected to thermo-electro-mechanical loadings, considering the temperature-dependency of the material properties. Composite Structures 2009;88:228-239.
15- Shariyat M. Vibration and dynamic buckling control of imperfect hybrid FGM plates with temperature-dependent material properties subjected to thermo-electro-mechanical loading conditions. Composite Structures 2009;88:240-252.
16- Shariyat M. A nonlinear Hermitian transfinite element method for transient behavior analysis of hollow functionally graded cylinders with temperature-dependent materials under thermo-mechanical loads. International Journal of Pressures Vessels and Piping 2009;86:280-289. (Hot paper)
17- Shariyat M. Two new multiaxial HCF criteria based on virtual stress amplitude and virtual mean stress concepts, for complicated geometries and random non-proportional loading conditions. Trans. ASME, Journal of Engineering Materials and Technology 2009;131:031014(1-13).
18- Shariyat M. Three energy-based multiaxial HCF criteria for fatigue life determination in components under random non-proportional stress fields. Fatigue & Fracture of Engineering Materials & Structures 2009;32:785-808.
19- Shariyat M, Djamshidi P. Minimizing the engine-induced harshness based on the DOE method and sensitivity analysis of the full vehicle NVH model. International Journal of Automotive Technology 2009;10:687-696.
20- Shariyat M. A rapidly convergent nonlinear transfinite element procedure for transient thermoelastic analysis of temperature-dependent functionally graded cylinders. Journal of Solid Mechanics 2009;1:313-327.
21- Shariyat M. Non-linear dynamic thermo-mechanical buckling analysis of the imperfect sandwich plates based on a generalized three-dimensional high-order global–local plate theory. Composite Structures 2010;92:72-85.
22- Shariyat M. A generalized high-order global–local plate theory for nonlinear bending and buckling analyses of imperfect sandwich plates subjected to thermo-mechanical loads. Composite Structures 2010;92:130-143.
23- Shariyat M, Lavasani SMH, Khaghani M. Nonlinear transient thermal stress and elastic wave propagation analyses of thick temperature-dependent FGM cylinders, using a second-order point-collocation method. Applied Mathematical Modelling 2010;34:898-918.
24- Shariyat M. A generalized global–local high-order theory for bending and vibration analyses of sandwich plates subjected to thermo-mechanical loads. International Journal of Mechanical Sciences 2010;52:495-514.(Hot paper)
25- Shariyat M, Khaghani M, Lavasani SMH. Nonlinear thermoelasticity, vibration, and stress wave propagation analyses of thick FGM cylinders with temperature-dependent material properties. European Journal of Mechanics - A/Solids 2010;29:378-391. (Hot paper)
26- Shariyat M. New multiaxial HCF criteria based on instantaneous fatigue damage tracing in components with complicated geometries and random non-proportional loading conditions. International Journal of Damage Mechanics 2010;19:659-690.
27- Azadi M, Shariyat M. Nonlinear transient transfinite element thermal analysis of thick-walled FGM cylinders with temperature-dependent material properties. Meccanica 2010;45:305-318.
28- Alipour MM, Shariyat M, Shaban M. A semi-analytical solution for free vibration and modal stress analyses of circular plates resting on two-parameter elastic foundations. Journal of Solid Mechanics 2010;2:63-78.
29- Alipour MM, Shariyat M, Shaban M. A semi-analytical solution for free vibration of variable thickness two-directional-functionally graded plates on elastic foundations . International Journal of Mechanics and Materials in Design 2010;6:293-304.
30- Alipour MM, Shariyat M. Stress analysis of two-directional FGM moderately thick constrained circular plates with non-uniform load and substrate stiffness distributions. Journal of Solid Mechanics 2010;2:316-331.
31- Shariyat M, Rajabi Ghahnavieh M. An improved finite element-based model for reliability assessment of a profile-type automotive body experiencing uncertain loading conditions and material properties. SAE International Journal of Materials and Manufacturing 2011; 4(1): 957-968.
32- Shariyat M. Non-linear dynamic thermo-mechanical buckling analysis of the imperfect laminated and sandwich cylindrical shells based on a global-local theory inherently suitable for non-linear analyses. International Journal of Non-Linear Mechanics 2011;46:253-271. (Hot paper)
33- Lezgy-Nazargah M, Beheshti-Aval SB, Shariyat M. A refined mixed global–local finite element model for bending analysis of multi-layered rectangular composite beams with small widths. Thin-Walled Structures 2011;49:351-362.
34- Lezgy-Nazargah M, Shariyat M, Beheshti-Aval SB. A refined high-order global-local theory for finite element bending and vibration analyses of the laminated composite beams. Acta Mechanica 2011;217:219-242.
35- Shariyat M. A double-superposition global–local theory for vibration and dynamic buckling analyses of viscoelastic composite/sandwich plates: a complex modulus approach. Archive of Applied Mechanics 2011;81:1253-1268.
36- Shariyat M, Alipour MM. Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations. Archive of Applied Mechanics 2011;81:1289-1306.
37- Shariyat M, Nikkhah M, Kazemi R. Exact and numerical elastodynamic solutions for thick-walled functionally graded cylinders subjected to pressure shocks. International Journal of Pressure Vessels and Piping 2011;88:75-87. (Hot paper)
38- Shariyat M. A nonlinear double-superposition global–local theory for dynamic buckling of imperfect viscoelastic composite/sandwich plates: A hierarchical constitutive model. Composite Structures 2011;93:1890-1899.
39- Shariyat M. An accurate double superposition global–local theory for vibration and bending analyses of cylindrical composite and sandwich shells subjected to thermomechanical loads. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2011;225:1816-1832.
40- Shariyat M. Nonlinear thermomechanical dynamic buckling analysis of imperfect viscoelastic composite/sandwich shells by a double-superposition global–local theory and various constitutive models. Composite Structures 2011;93:2833-2843.
41- Alipour MM, Shariyat M. Semi-analytical buckling analysis of heterogeneous variable thickness viscoelastic circular plates on elastic foundations. Mechanics Research Communications 2011;38:594-601. (Hot paper)
42- Alipour MM, Shariyat M. A power series solution for free vibration of variable thickness Mindlin circular plates with two-directional material heterogeneity and elastic foundations. Journal of Solid Mechanics 2011;3:183-197.
43- Ashrafi H, Bahadori MR, Shariyat M. Modeling of viscoelastic solid polymers using a boundary element formulation with considering a body load. Advanced Materials Research 2012; 463-464: 499-504.
44- Ashrafi H, Mahzoon M, Shariyat M. A new mathematical modeling of contact treatment between an orthotropic material and a rigid indenter. Iranian Journal of Materials Science and Engineering 2012;9:29-41.
45- Ashrafi H, Bahadori MR, Shariyat M. Two-dimensional modeling of functionally graded viscoelastic materials using a boundary element approach. Advanced Materials Research 2012; 463-464: 570-574.
46- Shariyat M. A general nonlinear global-local theory for bending and buckling analyses of imperfect cylindrical laminated and sandwich shells under thermomechanical loads. Meccanica 2012;47:301-319.
47- Alipour MM, Shariyat M. An elasticity-equilibrium-based zigzag theory for axisymmetric bending and stress analysis of the functionally graded circular sandwich plates, using a Maclaurin-type series solution. European Journal of Mechanics - A/Solids 2012;34:78-101. (Hot paper)
48- Shariyat M, Ghajar R, Alipour MM. An analytical solution for a low velocity impact between a rigid sphere and a transversely isotropic strain-hardening plate supported by a rigid substrate. Journal of Engineering Mathematics 2012;75:107-125.
49- Shariyat M, Jazayeri SA, Fathi Sola J. Theoretical and experimental evaluation of performance of CNG engine and pistons fatigue lives employing modified fatigue criteria. Strength of Materials 2012;44:438-455.
50- Boorboor Ajdari MA, Jalili S, Jafari M, Zamani J, Shariyat M. The analytical solution of the buckling of composite truncated conical shells under combined external pressure and axial compression. Journal of Mechanical Science and Technology 2012;26:2783-2791.
51- Shariyat M, Rajabi Ghahnavieh M. Displacement/stress level-crossing stochastic finite element-based algorithm for reliability assessment of vehicle components with loading and material uncertainties. International Journal of Automotive Technology 2012; 13:1099-1111.
52- Shariyat M. Nonlinear transient stress and wave propagation analyses of the FGM thick cylinders, employing a unified generalized thermoelasticity theory. International Journal of Mechanical Sciences 2012;65:24-37.
53- Shariyat M, Moradi M, Samaee S. Nonlinear finite element eccentric low-velocity impact analysis of rectangular laminated composite plates subjected to in-phase/anti-phase biaxial preloads. Journal of Solid Mechanics 2012;4:177-194.
54- Shariyat M, Jafari R. Nonlinear low-velocity impact response analysis of a radially preloaded two-directional-functionally graded circular plate: A refined contact stiffness approach. Composites Part B 2013;45:981-994.
55- Ashrafi H, Keshmiri H, Bahadori M.R., Shariyat M. An FEM approach for three - dimensional thermoviscoelastic stress analysis of orthotropic Cylinders Made of Polymers. Advanced Materials Research 2013; 685: 295-299.
56- Ashrafi H, Keshmiri H, Bahadori M.R., Shariyat M. Boundary integral equation analysis of an inhomogeneous medium made of functionally graded materials. Advanced Materials Research 2013; 685: 285-289.
57- Shariyat M, Alipour MM. A power series solution for vibration and complex modal stress analyses of variable thickness viscoelastic two-directional FGM circular plates on elastic foundations. Applied Mathematical Modelling 2013;37:3063-3076.
58- Khalili SMR, Botshekanan Dehkordi M, Carrera E, Shariyat M. Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory. Composite Structures 2013;96:243-255.
59- Shariyat M, Alipour MM. Semi-analytical consistent zigzag-elasticity formulations with implicit layerwise shear correction factors for dynamic stress analysis of sandwich circular plates with FGM layers. Composites: Part B 2013;49:43-64.
60- Ashrafi H, Asemi K, Shariyat M, Salehi M. Two-dimensional modeling of heterogeneous structures using graded finite element and boundary element methods. Meccanica 2013;48:663-680.
61- Shariyat M, Farzan F. Nonlinear eccentric low-velocity impact analysis of a highly prestressed FGM rectangular plate, using a refined contact law. Archive of Applied Mechanics 2013;83:623-641.
62- Shariyat M, Khodabandeh T. Comparison of the stress distributions of liquid gas road tankers with various configurations during braking, cornering, and vertical bump maneuvers. International Journal of Automotive Technology 2013;14:301-311.
63- Shariyat M, Jafari AA, Alipour MM. Investigation of the thickness variability and material heterogeneity effects on free vibration of the viscoelastic circular plates. Acta Mechanica Solida Sinica 2013;26:83-98.
64- Shariyat M, Darabi E. A variational iteration solution for elastic–plastic impact of polymer/clay nanocomposite plates with or without global lateral deflection, employing an enhanced contact law. International Journal of Mechanical Sciences 2013;67:14-27.
65- Shariyat M, Mohammadjani R. Three-dimensional compatible finite element stress analysis of spinning two-directional FGM annular plates and disks with load and elastic foundation non-uniformities. Latin American Journal of Solids and Structures 2013;10:859-890.
66- Alipour MM, Shariyat M. Semianalytical solution for buckling analysis of variable thickness two-directional functionally graded circular plates with nonuniform elastic foundations. ASCE Journal of Engineering Mechanics 2013;139:664-676.
67- Shariyat M, Alipour MM. A zigzag theory with local shear correction factors for semi-analytical bending modal analysis of functionally graded viscoelastic circular sandwich plates. Journal of Solid Mechanics 2012;4:84-105.
68- Khalili SMR, Botshekanan Dehkordi M, Shariyat M. Modeling and transient dynamic analysis of pseudoelastic SMA hybrid composite beam. Applied Mathematics and Computation 2013;219:9762-9782.
69- Asemi K, Shariyat M, Salehi M, Ashrafi H. A full compatible three-dimensional elasticity element for buckling analysis of FGM rectangular plates subjected to various combinations of biaxial normal and shear loads. Finite Elements in Analysis and Design 2013;74:9-21.
70- Asemi K, Shariyat M. Highly accurate nonlinear three-dimensional finite element elasticity approach for biaxial buckling of rectangular anisotropic FGM plates with general orthotropy directions. Composite Structures 2013;106:235-249.
71- Alipour MM, Shariyat M. Analytical zigzag-elasticity transient and forced dynamic stress and displacement response prediction of the annular FGM sandwich plates. Composite Structures 2013;106:426-445.
72- Asemi K, Ashrafi H, Salehi M, Shariyat M. Three-dimensional static and dynamic analysis of functionally graded elliptical plates, employing graded finite elements. Acta Mechanica 2013;224:1849-1864.
73- Ashrafi H, Asemi K, Shariyat M. A three-dimensional boundary element stress and bending analysis of transversely/longitudinally graded plates with circular cutouts under biaxial loading. European Journal of Mechanics - A/Solids 2013;42:344–357.
74- Khalili SMR, Shariyat M, Rajabi I. A finite element based global–local theory for static analysis of rectangular sandwich and laminated composite plates. Composite Structures 2014;107:177-189.
75- Shariyat M, Asemi K. Three-dimensional non-linear elasticity-based 3D cubic B-spline finite element shear buckling analysis of rectangular orthotropic FGM plates surrounded by elastic foundations. Composites Part B 2014;56:934-947.
76- Ashrafi H, Shariyat M, Khalili SMR, Asemi K. A boundary element formulation for the heterogeneous functionally graded viscoelastic structures. Applied Mathematics and Computation 2013;225:246–262.
77- Ashrafi H, Shariyat M, Asemi K. A time-domain boundary element method for quasistatic thermoviscoelastic behavior modeling of the functionally graded materials. International Journal of Mechanics and Materials in Design 2013;9:295-307.
78- Shariyat M, Moradi M. Enhanced algorithm for nonlinear impact of rectangular composite plates with SMA wires, accurately tracing the instantaneous and local phase changes. Composite Structures 2014;108:834-847.
79- Shariyat M, Jafari R. A micromechanical approach for semi-analytical low-velocity impact analysis of a bidirectional functionally graded circular plate resting on an elastic foundation. Meccanica 2013;48:2127-2148.
80- Shariyat M, Asgari D. Nonlinear thermal buckling and postbuckling analyses of imperfect variable thickness temperature-dependent bidirectional functionally graded cylindrical shells. International Journal of Pressure Vessels and Piping 2013;111-112:310-320.
81- Alipour MM, Shariyat M. An analytical global–local Taylor transformation-based vibration solution for annular FGM sandwich plates supported by nonuniform elastic foundations. Archives of Civil and Mechanical Engineering 2014;14:6-24.
82- Shariyat M, Moradi M, Samaee S. Enhanced model for nonlinear dynamic analysis of rectangular composite plates with embedded SMA wires, considering the instantaneous local phase changes. Composite Structures 2014;109:106-118.
83- Behravan Rad A, Shariyat M. A three-dimensional elasticity solution for two-directional FGM annular plates with non-uniform elastic foundations subjected to normal and shear tractions. Acta Mechanica Solida Sinica 2013;26:671-690.
84- Alipour MM, Shariyat M. Analytical stress analysis of annular FGM sandwich plates with non-uniform shear and normal tractions, employing a zigzag-elasticity plate theory. Aerospace Science and Technology 2014;32:235-259.
85- Jalili S, Zamani J, Shariyat M, Jalili N, Ajdari MAB, Jafari M. Experimental and numerical investigation of composite conical shells’ stability subjected to dynamic loading. Structural Engineering and Mechanics 2014;49:555-568.
86- Mansouri MH, Shariyat M. Thermal buckling predictions of three types of high-order theories for the heterogeneous orthotropic plates, using the new version of DQM. Composite Structures 2014;113:40-55.
87- Shariyat M, Farzan Nasab F. Low-velocity impact analysis of the hierarchical viscoelastic FGM plates, using an explicit shear-bending decomposition theory and the new DQ method. Composite Structures 2014;113:63-73.
88- Shariyat M, Asemi K. 3D B-spline finite element nonlinear elasticity buckling analysis of rectangular FGM plates under non-uniform edge loads, using a micromechanical model. Composite Structures 2014;112:397-408.
89- Ashrafi H, Shariyat M. A numerical Lagrangian approach for analysis of contact viscoelastic problems. Computational Mathematics and Modeling 2014;25:416-422.
90- Shariyat M, Alipour MM. A novel shear correction factor for stress and modal analyses of annular FGM plates with non-uniform inclined tractions and non-uniform elastic foundations. International Journal of Mechanical Sciences 2014;87:60-71.
91- Shariyat M, Farzan Nasab F. Eccentric low-velocity impact analysis of transversely graded plates with Winkler-type elastic foundations and fully or partially supported edges. Thin-Walled Structures 2014;84:112-122.
92- Shariyat M, Hosseini SH. Eccentric impact analysis of pre-stressed composite sandwich plates with viscoelastic cores: A novel global–local theory and a refined contact law. Composite Structures 2014:117:333-345.
93- Khalili SMR, Shariyat M, Mokhtari M. Static tensile and transient dynamic response of cracked aluminum plate repaired with composite patch – numerical study. Applied Composite Materials 2014;21:441-455.
94- Shariyat M, Mohammadjani R. Three-dimensional stress field analysis of rotating thick bidirectional functionally graded axisymmetric annular plates with nonuniform loads and elastic foundations. Journal of Composite Materials 2014;48:2879-2904.
95- Ashrafi H, Shariyat M. A numerical boundary integral equation analysis for standard linear viscoelastic media made of functionally graded materials. International Journal of Mechanical and Materials Engineering 2015;1:9.
96- Shariyat M, Khalili SMR, Rajabi I. A global–local theory with stress recovery and a new post-processing technique for stress analysis of asymmetric orthotropic sandwich plates with single/dual cores. Computer Methods in Applied Mechanics and Engineering 2015;286:192–215.
97- Shariyat M, Hosseini SH. Accurate eccentric impact analysis of the preloaded SMA composite plates, based on a novel mixed-order hyperbolic global–local theory. Composite Structures 2015;124:140-151.
98- Behravan Rad A, Shariyat M. Three-dimensional magneto-elastic analysis of asymmetric variable thickness porous FGM circular plates with non-uniform tractions and Kerr elastic foundations. Composite Structures 2015;125: 558-574.
99- Alipour MM, Shariyat M. Analytical zigzag formulation with 3D elasticity corrections for bending and stress analysis of circular/annular composite sandwich plates with auxetic cores. Composite Structures 2015:132;175-197.
100- Shariyat M, Alipour MM. Novel layerwise shear correction factors for zigzag theories of circular sandwich plates with functionally graded layers. Latin American Journal of Solids and Structures 2015;12:1362-1396.
101- Mansouri MH, Shariyat M. Biaxial thermo-mechanical buckling of orthotropic auxetic FGM plates with temperature and moisture dependent material properties on elastic foundations. Composites Part B 2015;83:88-104.
102- Sarvi Z, Shariyat M, Asgari M. Closed-form molecular mechanics formulations for the 3D local buckling and 2D effective Young’s modulus of the nanosheets, Journal of Computational Applied Mechanics 2015; 46(1): 51-62.
103- Fallahzadeh R. S, Shariyat M. Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent non-ideal supports, subjected to moving loads: An analytical approach. Journal of Computational Applied Mechanics 2015; 46(2): 133-151.
104- Shariyat M, Niknami A. Impact analysis of strain-rate-dependent composite plates with SMA wires in thermal environments: Proposing refined coupled thermoelasticity, constitutive, and contact models. Composite Structures 2016;136:191-203.
105- Shariyat M, Sarvi Z, Asgari M. A unit-cell-based three-dimensional molecular mechanics analysis for buckling load, effective elasticity and Poisson's ratio determination of the nanosheets. Molecular Simulation 2016;42:353-369.
106- Sarvi Z, Asgari M, Shariyat M, Saeidi Googarchin H. Explicit expressions describing elastic properties and buckling load of BN nanosheets due to the effects of vacancy defects. Superlattices and Microstructures 2015;88:668-678.
107- Asemi K, Shariyat M. Three-dimensional biaxial post-buckling analysis of heterogeneous auxetic rectangular plates on elastic foundations by new criteria. Computer Methods in Applied Mechanics and Engineering 2016;302:1-26.
108- Shariyat M, Asemi K. Uniaxial and biaxial post-buckling behaviors of longitudinally graded rectangular plates on elastic foundations according to the 3D theory of elasticity. Composite Structures 2016;142:57-70.
109- Ashrafi H, Shariyat M. A mathematical boundary integral equation for analysis of the heterogeneous media, using the functionally graded elements. International Journal of Computational Materials Science and Engineering 2015;4:1550017 (27 pages), DOI: 10.1142/S2047684115500177.
110- Behravan Rad A, Shariyat M. Thermo-magneto-elasticity analysis of variable thickness annular FGM plates with asymmetric shear and normal loads and non-uniform elastic foundations. Archives of Civil and Mechanical Engineering 2016;16(3):448-466.
111- Shariyat M, Fathi Sola J, Jazayeri SA. Experimentally validated combustion and piston fatigue life evaluation procedures for the bi-fuel engines, using an integral-type fatigue criterion. Latin American Journal of Solids and Structures 2016;13:1031-1054.
112- Niknami A, Shariyat M. Refined constitutive, bridging, and contact laws for including effects of the impact-induced temperature rise in impact responses of composite plates with embedded SMA wires. Thin-Walled Structures 2016;106:166-178.
113- Shariyat M, Asemi K. 3D energy-based finite element elasticity approach for shear postbuckling analysis of functionally graded plates on elastic foundations. Composite Structures 2016;152:579-591.
114- Shariyat M, Niknami A. Layerwise numerical and experimental impact analysis of temperature-dependent transversely flexible composite plates with embedded SMA wires in thermal environments. Composite Structures 2016;153:692-703.
115- Shariyat M, Ashrafi H, Bandband H. Brain tissue response analysis based on several hyperelastic models, for traumatic brain injury assessment. Universal Journal of Biomedical Engineering 2016;4:11-26.
116- Asemi K, Ashrafi H, Shariyat M. Three-dimensional stress and free vibration analyses of functionally graded plates with circular holes by the use of the graded finite element method. Journal of Applied Mechanics and Technical Physics 2016;57:690-700.
117- Niknami A, Shariyat M. Influence of the heat generation on the phase transformations and impact responses of composite plates with embedded SMA wires. Journal of Computational and Applied Research in Mechanical Engineering 2017;6(2):13-26.
118- Shariyat M, Mozaffari A, Pachenari MH. Damping sources interactions in impact of viscoelastic composite plates with damping treated SMA wires, using a hyperbolic plate theory. Applied Mathematical Modelling 2017;43:421-440.
119- Mansouri MH, Shariyat M. Differential quadrature thermal buckling analysis of general quadrilateral orthotropic auxetic FGM plates on elastic foundations. Thin-Walled Structures 2017;112:194-207.
120- Alipour MM, Shariyat M. Analytical layerwise free vibration analysis of circular/annular composite sandwich plates with auxetic cores. International Journal of Mechanics and Materials in Design 2017;13:125-157.
121- Ashrafi H, Shariyat M. A three–dimensional comparative study of the isoparametric graded boundary and finite element methods for nonhomogeneous FGM plates with eccentric cutouts. International Journal of Computational Methods 2017:14: 1750006 (28 pages).
122- Ghaznavi A, Shariyat M. Non-linear layerwise dynamic response analysis of sandwich plates with soft auxetic cores and embedded SMA wires experiencing cyclic loadings. Composite Structures 2017;171:185-197.
123- Shariyat M, Alipour MM. Analytical bending and stress analysis of variable thickness FGM auxetic conical/cylindrical shells with general tractions. Latin American Journal of Solids and Structures 2017;14:805-843.
124- Soltanieh G, Kabir MZ, Shariyat M. A robust algorithm for behavior and effectiveness investigations of super-elastic SMA wires embedded in composite plates under impulse loading. Composite Structures 2017;179:355-367.
125- Soltanieh G, Kabir MZ, Shariyat M. Snap instability of shallow laminated cylindrical shells reinforced with functionally graded shape memory alloy wires. Composite Structures 2017;180:581-595.
126- Behzad H, Shaterzadeh A, Shariyat M. Thermal buckling analysis of functionally graded perforated annular sector plates using 3D elasticity theory. Journal of Thermal Stresses 2017;40:1545-1562.
127- Shariyat M, Behzad H, Shaterzadeh AR. 3D thermomechanical buckling analysis of perforated annular sector plates with multiaxial material heterogeneities based on curved B-spline elements, Composite Structures 2018;188:89-103.
128- Shariyat M, Roshanfar M. A new analytical solution and novel energy formulations for non-linear eccentric impact analysis of composite multi-layer/sandwich plates resting on point supports. Thin-Walled Structures 2018;127:157-168.
129- Reza Kashyzadeh K, Farrahi GH, Shariyat M, Ahmadian MT. Experimental accuracy assessment of various high-cycle fatigue criteria for a critical component with a complicated geometry and multi-input random non-proportional 3D stress components. Engineering Failure Analysis 2018;90:534-553.
130- Alipour MM, Shariyat M. Analytical layerwise stress and deformation analysis of laminated composite plates with arbitrary shapes of interfacial imperfections and discontinuous lateral deflections. Composite Structures 2018;200:88-102.
131- Shaterzadeh AR, Behzad H, Shariyat M. Stability analysis of composite perforated annular sector plates under thermomechanical loading by finite element method. International Journal of Structural Stability and Dynamics 2018;18:1850100 (23 pages).
132- Behzad H, Shaterzadeh A, Shariyat M. Mechanical buckling analysis of composite annular sector plate with bean-shaped cut-out using three dimensional finite element method. Journal of Solid Mechanics 2018;10:476-488.
133- Shariyat M, Hosseini SH. Novel rule-based global-local theory and energy model for sandwich plates with compliant cores and unevenly-distributed anisotropic SMA wires under impulsive/impact loads. Composite Structures 2019;209:727–738
134- Shariyat M, Ghafourinam M. Hygrothermomechanical creep and stress redistribution analysis of thick-walled FGM spheres with temperature and moisture dependent material properties and inelastic radius changes. International Journal of Pressure Vessels and Piping 2019;169:94–114.
135- Soltanieh G, Kabir MZ, Shariyat M. Improvement of the dynamic instability of shallow hybrid composite cylindrical shells under impulse loads using shape memory alloy wires. Composites Part B: Engineering 2019;167;167-179.
136- Soltanieh G, Shariyat M, Kabir MZ. Influence of the 3D material tailoring on snap-through and snap-back post-buckling behaviors of steel-wire-reinforced hybrid 3D graded orthotropic shallow cylindrical panels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019;233:685–701.
137- Ghaznavi A, Shariyat M. Higher-order global-local theory with novel 3D-equilibrium-based corrections for static, frequency, and dynamic analysis of sandwich plates with flexible auxetic cores. Mechanics of Advanced Materials and Structures 2019;26:559–578.
138- Shariyat M, Farrokhi F. Nonlinear semi-analytical nonlocal strain-gradient dynamic response investigation of phase-transition-induced transversely graded hierarchical viscoelastic nano/microplates. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019;233:5388–5409.
139- Alipour MM, Shariyat M. Nonlocal zigzag analytical solution for Laplacian hygrothermal stress analysis of annular sandwich macro/nanoplates with poor adhesions and 2D-FGM porous cores. Archives of Civil and Mechanical Engineering 2019;19:1211-1234.
140- Shariyat M, Jahanshahi S, Rahimi H. Nonlinear Hermitian generalized hygrothermoelastic stress and wave propagation analyses of thick FGM spheres exhibiting temperature, moisture, and strain-rate material dependencies. Composite Structures 2019;229:111364.
141- Shariyat M, Rahimi-Ghozat M. Generalized 3D high cycle fatigue criteria for multiscale bridging-based progressive damage analysis of multilayer composite parts under random loads and material deterioration. Fatigue & Fracture of Engineering Materials & Structures 2020;43:466–487.
142- Mirparizi M, Fotuhi AR, Shariyat M. Nonlinear coupled thermoelastic analysis of thermal wave propagation in a functionally graded finite solid undergoing finite strain. Journal of Thermal Analysis and Calorimetry 2020;139:2309–2320.
143- Shariyat M, Mohammadjani R. Three-dimensional dynamic stress and vibration analyses of thick singular-kernel fractional-order viscoelastic annular rotating discs under nonuniform loads. International Journal of Structural Stability and Dynamics 2020;20:2050007.
144- Ghaznavi A, Shariyat M. Effects of the asymmetric behavior of the shape memory alloy on nonlinear dynamic responses of thick sandwich plates with embedded SMA wires. Journal of Computational and Applied Research in Mechanical Engineering 2020;9:183-197.
145- Shariyat M, Jahangiri M. Nonlinear impact and damping investigations of viscoporoelastic functionally graded plates with in-plane diffusion and partial supports. Composite Structures 2020;245:112345.
146- Shariyat M, Mohammadjani R. 3D nonlinear variable strain-rate-dependent-order fractional thermoviscoelastic dynamic stress investigation and vibration of thick transversely graded rotating annular plates/discs. Applied Mathematical Modelling 2020;84:287-323.
147- Shariyat M, Ghaznavi A. Influence analysis of phase transformation anisotropy of shape memory alloy wires embedded in sandwich plates with flexible cores by a third-order zigzag theory with dynamic three-dimensional elasticity corrections. Journal of Sandwich Structures & Materials 2020;22:1450–1495.
148- Mohammadjani R, Shariyat M. Nonlinear thermomechanical vibration mitigation analysis in rotating fractional-order viscoelastic bidirectional FG annular disks under nonuniform shocks. Journal of Thermal Stresses 2020;43:829–873.
149- Alipour MM, Shariyat M, Shaban M. Free vibration analysis of bidirectional functionally graded conical/cylindrical shells and annular plates on nonlinear elastic foundations, based on a unified differential transform analytical formulation. Journal of Solid Mechanics 2020;12:385-400.
150- Shariyat M, Ghaznavi A, Hosseini SH. On inefficiency of the shape memory alloys in dynamically loaded sandwich plates with structural damping: New 3D zigzag-viscoelasticity theory and asymmetric transformations. Thin–Walled Structures 2020;155: 106879.
151- Foroutan K, Ahmadi H, Shariyat M. Asymmetric large deformation superharmonic and subharmonic resonances of spiral stiffened imperfect FG cylindrical shells resting on generalized nonlinear viscoelastic foundations. International Journal of Applied Mechanics 2020;12:2050052.
152- Shariyat M, Khosravi M, Yazdani Ariatapeh M, Najafipour M. Nonlinear stress and deformation analysis of pressurized thick-walled hyperelastic cylinders with experimental verifications and material identifications. International Journal of Pressure Vessels and Piping 2020;188:104211.
153- Alipour MM, Shariyat M. Using orthotropic viscoelastic representative elements for C1-continuous zigzag dynamic response assessment of sandwich FG circular plates with unevenly damaged adhesive layers. Mechanics Based Design of Structures and Machines 2021;49:355–380.
154- Ghaznavi A, Shariyat M. Parametric study of sandwich plates with viscoelastic, auxetic viscoelastic and orthotropic viscoelastic core using a new higher order global-local theory. Journal of Computational Applied Mechanics 2021;52:126-153.
155- Mirparizi M, Shariyat M, Fotuhi AR. Large deformation Hermitian finite element coupled thermoelasticity analysis of wave propagation and reflection in a finite domain. Journal of Solid Mechanics 2021;13:485-502.
156- Alipour MM, Shariyat M. Localized and overall interaction effects of irregular interfacial bonds and elastic edge restraints for sandwich and FGM-multilayer circular plates with normal/shear tractions. Journal of Sandwich Structures & Materials 2021;23:988-1027.
157- Shariyat M, Mirmohammadi M. Modified strain gradient analysis of microscale dynamic response suppression of SMA-composite microplates featuring 2D superelastic phase transformations and kinematic nonlinearity. Composite Structures 2022;280:114879 .
158- Shariyat M. Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites. Frattura ed Integrità Strutturale 2022;59:423-443.
159- Shariyat M, Sedaghat AM. Nonlinear finite-speed thermoelasticity with physically possible fractional orders for wave propagation, reflection, and mixing analyses in annular discs with initial rotational pre-deformations. Acta Mechanica 2022;233:725-752.
160- Ghaznavi A, Shariyat M. Numerical investigating of the effect of material and geometrical parameters on the static behavior of sandwich plate. Journal of Computational and Applied Research in Mechanical Engineering 2022;11:297-315.
161- Shariyat M, Abedi S. An accurate hyperelasticity-based plate theory and nonlinear energy-based micromechanics for impact and shock analyses of compliant particle-reinforced FG hyperelastic plates. ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik 2022;102:e202100099.
162- Shariyat M. Nonlinear dynamic response dissipation of plates with heterogeneous orthotropic distributions of shape memory alloy micro‑wires undergoing 3D phase‑transformations. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2022;44:174.
163- Mobasserfar Y, Adibnazari S, Shariyat M. Skew-normal log-volatility model of road surface profile. Mechanical Systems and Signal Processing 2022;177:109236.
164- Homayouni M, Shariyat M, Rahmani O. Thermally nonlinear generalized thermoelasticity investigation of a functionally graded thick hollow cylinder based on the finite difference method. Thin-Walled Structures 2022;177:109359.
165- Ghaznavi A, Shariyat M. Real time finite element simulation of thick and thin sandwich plate with viscoelastic core and embedded SMA wires. Journal of Computational Applied Mechanics 2022;53(2):219-243.
166- Shariyat M, Khani Arani H. Nonlinear interaction of the damped large dynamic deformations of the Mooney–Rivlin hyperelastic plates with the viscoelastic and shear reactions of the supporting substrate. International Journal of Non-Linear Mechanics 2022;146:104184.
167- Barati AR, Shariyat M. Novel exact layerwise analytical solution for anisotropic multi-layer magneto-piezo-elastic hollow spheres under asymmetric magneto-electro-hygro-thermo-mechanical loads. Composite Structures 2022;302:116227.
168- Shariyat M, Hosseini SH. 3D layerwise impact investigation of sandwich plates with multi-directional phase transformation SMA face sheets and nearly incompressible compliant hyperelastic cores. Acta Mechanica 2022;233:4385–4406.
169- Yazdani Ariatapeh M, Shariyat M, Khosravi M. Semi-analytical large deformation and three-dimensional stress analyses of pressurized finite-length thick-walled incompressible hyperelastic cylinders and pipes. International Journal of Applied Mechanics 2023;15:2250100.
170- Khani Arani H, Shariyat M. Nonlinear dynamic response of an abruptly loaded rubber‑like hyperelastic plate resting on a dissipative viscoelastic Winkler–Pasternak medium. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 2023;47:219–236.
171- Yazdani Ariatapeh M, Shariyat M, Khosravi M. Analytical-based exact-kernel vibration and long-term creep stress and large deformation redistributions of the suddenly pressurized incompressible visco-hyperelastic thick cylinders. International Journal of Non-Linear Mechanics 2023;151:104383.
172- Shariyat M. Propagation and interference of oppositely traveling generalized multi-fractional-order thermo-viscoelastic waves in discs with fractionalorder constitutive and heat conduction models. Waves in Random and Complex Media 2022, DOI: 10.1080/17455030.2022.2056258.
173- Shariyat M, Khani Arani H. Dynamic behavior of heterogeneous neo-Hookean/Mooney–Rivlin plates reinforced nonuniformly by hyperelastic inclusions: Proposing the correct micromechanical model. Journal of Vibration and Control 2023;29:1626–1643.
174- Shariyat M, Mirmohammadi M. Comparing the modified strain gradient, modified couple stress, and classical results for vibration dissipation of SMA‑wire‑reinforced microplates with nonidentical size‑effect coefficients. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 2023;47:641–659.
175- Khani Arani H, Shariyat M. Nonlinear 2D-DQ volume-preservative global–local dynamic analysis of composite sandwich plates with soft hyperelastic cores and viscoelastic Winkler-Pasternak foundations. Structures 2023;55:727–746.
176- Barati AR, Shariyat M. Exact closed-form solutions for behavior investigation of heterogeneous piezo-magneto-elastic discs under magneto-electro-hygro-thermo-mechanical loads. European Journal of Mechanics / A Solids 2023;101:105066.
177- Shariyat M, Sedaghat AM. Generalized fractional‑order hygro‑thermo‑viscoelastic wave propagation/reflection in annular spinning discs: comparisons with the classical and Lord–Shulman thermo‑viscoelastic models. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2023;45:506.
178- Najafipour M, Shariyat M. A refined first-order shear deformation theory for large dynamic and static deflection investigations of abruptly/harmonically pressurized/blasted incompressible circular hyperelastic plates. Ocean Engineering 2023;289:116185 .
179- Shariyat M, Yazdani Ariatapeh M. 3D hybrid semi-analytical creep, dissipation, and dynamic stress analyses of abruptly pressurized finite-length thick visco-hyperelastic cylinders. Acta Mechanica 2023;234:6451–6480.
180- Shariyat M. A novel refined Caputo kernel and constitutive concepts for semi-exact nonlinear dynamic and creep analyses of suddenly pressurized hollow fractional-order visco-hyperelastic cylinders. International Journal of Pressure Vessels and Piping 2024;207:105115.
181- Mirparizi M, Shariyat M, Fotuhi AR, A novel approach for generalized Green-Naghdi-type electro-magneto-thermo-hyperelasticity wave propagation and reflection investigations in near-incompressible layers under shock loads. Journal of Thermal Stresses, DOI: 10.1080/01495739.2024.2338472.
B) ISC and Other International Research Journal Papers
1- Shariyat M, Eslami MR, Shakeri M. Elastic-Plastic Dynamic Buckling Analysis of Imperfect Cylindrical Shells. Amirkabir Journal of Science and Technology 1999;11(42):35-46.
2- Shariyat M, Nourozi M. Proposing a procedure for HCF life assessment based on Findley and McDiarmid theories. Automotive Journal 2004, Winter, 1-9.
3- Shariyat M, Yaghootian A. Static buckling of crcular cylindrical piezoelectric shells based on higher order theorie. Sharif University Journal 2008,40:93-100.
4-Shariyat M, Askari AR. A comparison among the thermoelastic results of the classical, L-S, and G-L theories for a half space. Journal of Faculty of Engineering (Tehran University) 2008;41(4):443-450.
5-Shariyat M, Askari AR. Analysis of 2-Dim thermoelasticity problems of thermoelasticity theory with two relaxation times by transfinite elements method. Modares Mechanical Engineering 2008;31:25-35.
6- Shariyat M, Yaghootian A. Bending analysis of piezoelectric cylindrical shells using a three dimentional higher order theory. Modares Mechanical Engineering 2008;31:13-24.
7- Shariyat M, Yaghootian A. Buckling analysis of circular cylindrical piezoelectric shells under electromechanical loads, based on a higher order theory. Iranian Journal of Mechanical Engineering 2007;9(1):41-58.
8- Shariyat M, Azadmanesh M. Thermal buckling analysis of rectangular composite plates subjected to large deflections, based on a layerwise theory and Budiansky's criterion modification. Iranian Journal of Mechanical Engineering 2007;9(1):25-40.
9- Shariyat M. Dynamic buckling of circular cylindrical FGM shells with initial imperfections and temperature gradient subjected to axial loading, based on a higher order theory. Iranian Journal of Mechanical Engineering 2008;10(1):6-27.
10- Shariyat M, Aminaee I. Investigating effects of using piezoelectric layers on the free and forced vibrations of FGM plates. Sharif University Journal 2010;51(2):33-41.
11- Shariyat M, Nikkhah M. An exact elastodynamic solution for functionally graded thick-walled cylinders subjected to dynamic pressures. Iranian Journal of Mechanical Engineering 2009; 10(1):55-76.
12- Hosseini M, Shariyat M. Torsional buckling analysis of an imperfect vehicle composite drive shaft based on a higher order theory. Journal of Mechanical Research and Application 2009;1(1):39-44.
13- Shariyat M, Asgari D. Nonlinear transient thermoelastic analysis of a thick FGM cylinder with temperature-dependent material properties using the finite element method. Amirkabir Journal of Science and Tech 2010;42(1):9-18.
14- Shariyat M, Ganjidoust, A. Fatigue failure and damage analysis of an anti-roll bar under random fatigue tests. Journal Of Solid Mechanics in Engineering 2010;1(3):69-76.
15- Shariyat M, Ganjipour A. Investigating the frontal crash of a passenger car and effects of utilizing a composite bumper. Journal of Faculty of Engineering (Tehran University) 2010; 43(4):511-518.
16- Shariyat M, Alipour MM. A differential transform approach for modal analysis of variable thickness two-directional FGM circular plates on elastic foundations. Iranian Journal of Mechanical Engineering 2010; 11(2): 15-38.
17- Ashrafi H, Shariyat M. A Computational Analysis of contact problems with friction based on a modified augmented Lagrangian optimization Approach Applied to Nanoindentation. Aerospace Mechanics Journal 2012; 8(1): 1-12.
18- Ashrafi H, Shariyat M. A mathematical approach for describing time-dependent Poisson's ratios of periodontal ligaments. Journal of Biomedical Physics and Engineering 2012; 2(3): 108-115.
19- Ashrafi H, Shariyat M. Modeling of viscoelastic properties for polymeric thin solid layers using a contact nanoindentation approach. Iranian Journal of Surface Science and Technology, 2012; 14: 17-26.
20- Shariyat M, Rajabi Ghahnavieh M. Reliability analysis of beams with both random material properties and random loading conditions. Journal of Applied and Computational Sciences in Mechanics 2013; 24(1): 1-18.
21- Shariyat M, Rezaei Dashtabadi GR, Jafari AA. Nonlinear lateral deflection analysis of an FGM circular plate whose material properties vary in transverse and radial directions. Aerospace Mechanics Journal 2012; 9(4): 35-53.
22- Shariyat M, Agheb R. Analytical dynamic behavior analysis of FGM viscoelastic plates subjected to transverse loads with arbitrary time variations. Iranian Journal of Mechanical Engineering 2013; 15(2): 52-72.
23- Shariyat M, Alipour MM. An analytical shear factor for FGM circular plates with non-uniform elastic foundations and normal and shear tractions. Iranian Journal of Mechanical Engineering 2013; 14(2): 50-72.
24- Shariyat M, Ghaznavi A. Simulation of the superelastic and shape memory effects based on various micromechanical models, under the simple and cyclic mechanical and thermal loadings. Iranian Journal of Mechanical Engineering 2014; 16(1): 78-103.
25- Shariyat M, Samaee S, Moradi M. Nonlinear vibration analysis of composite plates with SMA wires, considering instantaneous variations of the martensite volume fraction. Journal Of Solid Mechanics In Engineering 2012: 5(1): 57-70.
26- Rajabi I, Khalili SMR, Shariyat M. Experimental bending analysis of strip sandwich and laminated composite Plates. International Journal of Advanced Design and Manufacturing Technology 2014; 7(4); 87-98.
27- Farzan F, Shariyat M, Ghajar R. A semi-analytical solution for low-velocity impact analysis of functionally graded rectangular plates. Sharif University Journal 2014; 30(2): 67-74.
28- Ghajar R, Shariyat M, Hosseini SH. Nonlinear numerical elasticity analysis of eccentric low-velocity impact of a rectangular sandwich plate with composite face sheets subjected to biaxial preloads. Journal of Solid and Fluid Mechanics 2015; 5(1): 78-99.
29- Ashrafi H, Shariyat M. A nano-indentation identification technique for viscoelastic constitutive characteristics of periodontal ligaments. Journal of Biomedical Physics and Engineering 2016; 6(2): 109-118.
30- Hosseini SH, Shariyat M, Ghajar R. Numerical simulation of low-velocity impact of rectangular composite plates with embedded SMA strips, considering the instantaneous local phase changes. Journal of Energetic Materials 2015; 10(2): 53-63.
31- Fallahzadeh R. S , Shariyat M. The effects of the moving load and the attached mass-spring-damper system interactions on the dynamic responses of the composite plates: An analytical approach. Mechanics of Advanced Composite Structures 2015; 2: 17-30.
32- Hosseini R, Azadi M, Sadeghi Hegar M, Pournaghi Y, Shariyat M. Free and forced vibration analysis on finite element model of an off-road vehicle. International Journal of Automotive Engineering 2015; 5(4): 2028-2033.
33- Niknami A, Shariyat M. Coupled thermoelasticity impact response analysis of composite plates with SMA wires in thermal environments. Iranian Journal of Mechanical Engineering 2015; 16(1): 78-101.
34- Rajabi I, Khalili SMR, Shariyat M. Bending analysis of composite and sandwich plates containing piezoelectric layers by an improved global-local theory. Journal of Solid and Fluid Mechanics 2016;6(2):121-137.
35- M.H. Pachenari, A. Mozaffari, M. Shariyat. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory. Journal of Solid and Fluid Mechanics 2016;6(3):97-108.
36- Shariyat M, Pachenari M.H., Mozaffari A. Low-velocity impact analysis of a viscoelastic composite plate with flexible layers based on a layerwise theory and a novel energy formulation. Aerospace Mechanics Journal 2018; 14(1): 81-95.
37- Reza Kashyzadeh K, Farrahi GH, Shariyat M, Ahmadian MT. Experimental and finite element studies on free vibration of automotive Steering Knuckle. International Journal of Engineering, Transactions B: Applications 2017; 30(11): 1776-1783.
38- Pasandidehpour M, Shariyat M. Multi-objective design optimization for crash safety of a vehicle with a viscoelastic body and wide tapered multi-cell energy absorber using DOE method. International Journal of Automotive Engineering 2017;7(3):2148-2165.
39- Ashrafi H, Shariyat M. A Visco-hyperelastic model for prediction of the brain tissue response and the traumatic brain injuries. Arch Trauma Res 2017;6:41-48.
40- Shariyat M, Vahdanifar H, Dehghani M, Sfandyar M. Semi-Analytical Buckling Analysis of a Composite Plate with Circular Cutouts on an Elastic Foundation, Under Different Boundary and Partial Edge Loading Conditions. Iranian Journal of Mechanical Engineering 2017;19(2):89-107.
41- Shariyat M, Roshanfar M. Eccentric Low-Velocity Impact Analysis of Sandwich Plates Resting on Point Supports, Using a Semi-Analytical Method. Iranian Journal of Mechanical Engineering 2018;20(1):25-44.
42- Shariyat M, Ghaznavi A. Modified Global-local theory for investigating composite and sandwich plates under static transverse loading. Iranian Journal of Mechanical Engineering 2018;20(1):132-151.
43- Shariyat M, Hosseini SH. Low-velocity impact analysis of rectangular sandwich plates with composite face sheets reinforced by SMA wires and soft auxetic cores. Modares Mechanical Engineering 2018;18(4):373-384.
44- Reza Kashyzadeh K, Farrahi GH, Shariyat M, Ahmadian MT. The role of wheel alignment over the fatigue damage accumulation in vehicle steering knuckle. Journal of Stress Analysis 2018;3:21-33.
45- Alipour MM, M. Shariyat. Stress analysis of circular plates with variable thickness as transverse asymmetric. Journal of Solid and Fluid Mechanics 2019;9(1):97-109.
46- Hosseini SH, Shariyat M. Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory. Journal of Science and Technology of Composites 2019;6(1):127-142.
47- Ghaznavi A, Shariyat M. Stress and displacement analysis of thick sandwich plates with deformable auxetic cores using an enhanced third order global-local theory. Journal of Solid and Fluid Mechanics 2019;9(2):109-122.
48- Shariyat M, Jahangiri M, Asgari M. Numerical low-velocity impact and structural damping analysis of a rectangular poroelastic plate. Mechanical Engineering of Tabriz University, 2019;49(4):115-124.
49- Arani HK, Shariyat M, Mohammadian A. Vibration analysis of magnetostrictive nano-plate by using modified couple stress and nonlocal elasticity theories. International Journal of Materials and Metallurgical Engineering 2020;14:229-234.
Selected Conference Papers (Among More Than 150 Papers)
A) International Conference Papers
1-Eslami MR, Shariyat M. An isoparametric finite element solution of shell of revolution on elastic foundation. Proceedings of the International Conference on Computational Science, Melbourne, Australia, August 12-16, 1991, Pub. Springer International.
2- Eslami MR, Shariyat M. The primary and secondary stresses in pressure vessels. Proceedings of the ASME-PVP Conference, San Diego, CA, June 23-27, 1991.
3- Eslami MR, Shariyat M. A variational approach to buckling of cylindrical shells. Proceedings of the 7th. International Conference on Pressure Vessel Technology, Dusseldorf, Germany, May 31-June 5, 1992.
4- Eslami MR, Shariyat M. Elasto-plastic buckling of cylindrical shells. Proceedings of the ASME Joint European Conference on Engineering System Design and Analysis, Istanbul Turkey, June 29-July 3, 1992.
5- Eslami MR, Shariyat M. Stress Categorization (Key note speech). 1st Annual International Conference on Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran, 1995.
6- Eslami MR, Shariyat M, Mirzaadezaare N. Cyclic Loading Behavior of Pressure Vessels Made of Strain Hardeneing Materials. 2nd Annual International Conference on Mechanical Engineering (ISME1996), University of Shiraz, Shiraz, Iran, May 1996.
7- Shariyat M, Khalili SMR, Jahan P. Finite element creep analysis of welded components subjected to primary and secondary stresses, considering the heterogeneity of the material properties. 11th Annual International Conference on Mechanical Engineering (ISME 2003), Ferdowsi University, 2003.
8- Shariyat M, Shokrieh MM, Maisami AR. A comparative vehicle dynamic behavior study due to replacement of a steel leaf spring by a composite one. 11th Annual International Conference on Mechanical Engineering (ISME 2003), Ferdowsi University, 2003.
9- Shariyat M, Shahani AR, Abaie Bagheri M. Nonlinear bending and stability analysis of composite plates with initial imperfections, assuming large deformations and employing high-order theories. 11th Annual International Conference on Mechanical Engineering (ISME 2003), Ferdowsi University, 2003.
10- Shariyat M, Shahani AR, Abaie Bagheri M. Bending analysis of laminated composite plates, assuming large deformations and employing high-order theories. 1st International Aerospace Conference, Amirkabir University of Technology, Tehran, Iran, 2002.
11- Shariyat M, Nourozi M. An algorithm for HCF life assessment based on Findley and McDiarmid theories. 2nd International (and fifth national) Aerospace Conference, Isfahan, Iran, February 16-18, 2004.
12- Shariyat M, Yaghootian A. Nonlinear finite element analysis of the piezoelectric cylindrical shells based on the higher-order theories. 13th Annual International Conference on Mechanical Engineering (ISME 2005), Isfahan University, Isfahan, Iran, May 15-17, 2005.
13- Shariyat M, Askarian AR. Stress and heat transfer analysis in shock loadings based on the transfinite element method. 13th Annual International Conference on Mechanical Engineering (ISME 2005), Isfahan University (ISME2005), Isfahan, Iran, May 15-17, 2005.
14- Hosseini M, Shariyat M. Using variational calculus and FEM in analysis of a loaded shell. 38th Iranian International Conference on Mathematics, University of Zanjan, Zanjan, Iran, September 3-6, 2007.
15- Hosseini M, Shariyat M. The numerical analysis of instability of a composite cylindrical shell. 38th Iranian International Conference on Mathematics, University of Zanjan, Zanjan, Iran, September 3-6, 2007.
16- Hosseini M, Shariyat M. Stability analysis of a composite propeller shaft based on a higher-order theory and considering the initial geometric imperfections. 16th Annual International Conference on Mechanical Engineering (ISME 2008), S. Bahonar university of Kerman, Kerman, Iran, May 13-15, 2008.
17- Hosseini M, Shariyat M. Numerical analysis of prebuckling and buckling of a composite cylindrical shell under torsion, based on a higher-order theory. 16th Annual International Conference on Mechanical Engineering (ISME 2008), S. Bahonar university of Kerman, Kerma, Iran, May 13-15, 2008.
18- Shariyat M, Azadi M, Asgari D. Nonlinear transient finite element thermoelastic stress analysis of a hollow FGM cylinder for various heat transfer cases, taking the temperature-dependency of the material properties into account. 16th Annual International Conference on Mechanical Engineering (ISME 2008), S. Bahonar university of Kerman, Kerma, Iran, May 13-15, 2008.
19- Kazemi M M, Shariyat. Simulation of welding the process by the finite element method. 16th annual (International) Conference on Mech. Engineering (ISME2008), 16th Annual International Conference on Mechanical Engineering (ISME 2008), S. Bahonar university of Kerman, Kerma, Iran, May 13-15, 2008.
20- Ganjidoust A, Shariyat M. A modified approach for multiaxial fatigue damage prediction. International Conference on Fracture (ICF12), Ottawa, Ontario, Canada, October 14, 2009. (Indexex in Scopus)
21- Shariyat M, Jazayeri SA, Fathi Sola J. Piston's stress and crital load determination of the engine of the Samand vehicle based on simulation of the combustion, 17th Annual International Conference on Mechanical Engineering (ISME 2009), Tehran University, Tehran, Iran, May 19-21, 2009.
22- Fathi Sola J, Hosseini SV, Jazayeri SA, Shariyat M. Fatigue life analysis of the piston under mechanical and thermal loads. 6th International Conference on Internal Combustion Engines (ICICE-6), Thran, Iran, November 17-20, 2009.
23- Abedini M, Azadi Sh, Shariyat M. Quasi-dynamic stress analysis of a connecting rod considering the temperature-dependency of the material properties. 6th International Conference on Internal Combustion Engines (ICICE-6), Tehran, Iran, November 17-20, 2009.
24- Shariyat M, Alinezhad F. Nonlinear in-plane stress analysis of composite plates reinforced by shape memory alloys. 18th Annual International Conference on Mechanical Engineering (ISME 2010), Sharif University of Technology, Tehran, Iran, May 11-13, 2010.
25- Asharfi H, Shariyat M. Description of the time-dependent Poisson's ratio in thin films and surfaces using the nanoindentation technique. 11th Iranian Seminar on Surface Engineering and 6th International Plating Conference and Exhibition (ISSST2010), Tehran, Iran, October 14-16, 2010.
26- Ashrafi H, Shariyat M. Contact friction analysis of a rigid indenter in an thin FGM polymer layer. 11th Iranian Seminar on Surface Engineering and 6th International Plating Conference and Exhibition (ISSST2010), Tehran, Iran, October 14-16, 2010.
27- Assarzadeh S, Ghoreishi M, Shariyat M. Response surface methodology approach to process modeling and optimization of powder mixed electrical discharge machining (PMEDM). 16th International Symposium on Electromachining (ISEM XVI), Shanghai, China, April 19-23, 2010.
28- Ashrafi H, Shariyat M. A viscoelastic nanoindentation modeling on polymeric solid films by an augmented Lagrangian contact analysis. International Congress on Nanoscience and Nanotechnology (ICNN2010), Shiraz University, Shiraz, Iran, November 9-11, 2010.
29- Ashrafi H, Shariyat M. A nanoindentation modeling of time-dependent Poisson's ratio for viscoelastic solid polymers. Congress on Nanoscience and Nanotechnology (ICNN2010), Shiraz University, Shiraz, Iran, November 9-11, 2010.
30- Hazrati H, Shariyat M. Natural frequency & shape mode of isotropic and FGM plates using first-order shear deformation theory with finite element method and investigation of rotation of the line of nodes of vibration. The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Kish Island, Iran, December 27-30, 2010.
31- Alinejad F, Shariyat M, Jafari A. Nonlinear bending analysis of composite plates embedded with shape memory fibers. 16th US National Congress of Theoretical and Applied Mechanics ( USNCTAM2010), State College, Pennsylvania, USA, June 27- July 2, 2010.
32- Ashrafi H, Shariyat M. A mathematical approach for describing the time-dependent Poisson's ratio of viscoelastic ligaments: Mechanical characteristics of biological tissues. IEEE-Proceedings of the 17th Iranian Conference of Biomedical Engineering (ICBME2010), IEEE2010, Isfahan University of Medical Sciences, Isfahan, Iran, November 3-4, 2010. (Indexed in Scopus)
33- Ashrafi H, Shariyat M. A nanoindentation modeling of viscoelastic creep and relaxation behaviors of ligaments: Mechanical characteristics of biological tissues. IEEE-Proceedings of the 17th Iranian Conference of Biomedical Engineering (ICBME2010), IEEE2010, Isfahan University of Medical Sciences, Isfahan, Iran, November 3-4, 2010. (Indexed in Scopus)
34- Shariyat M, Rajabi Ghahnavieh M. An improved finite element-based model for reliability assessment of a profile-type automotive body experiencing uncertain loading conditions and material properties, SAE Technical paper No: 11IDM-0039, 2011.
35- Botshekanan Dehkordi1 M, Khalili SMR, Shariyat M. Non-linear forced vibration of a pseudoelastic SMA hybrid composite beam. Proceeding of the International Conference on Advances in Industrial and Production Engineering (AIPE2011), Kuala Lumpur, Malaysia, November 14-15, 2011.
36- Ashrafi H, Shariyat M. Thermoelastic analysis of post-restored teeth using a generalized mathematical approach. Proceedings of the 1st MEFOMP International Conference of Medical Physics, Shiraz University of Medical Sciences, Shiraz, Iran, October 26-28, 2011.
37- Ashrafi H, Shariyat M. Identification of the viscoelastic constitutive characteristics for periodontal ligaments. Proceedings of the 1st MEFOMP International Conference of Medical Physics, Shiraz University of Medical Sciences, Shiraz, Iran, October 26-28, 2011.
38- Khalili SMR, Shariyat M, Ashrafi H. Biomedical applications of smart materials in dentistry. Proceedings of the 1st MEFOMP International Conference of Medical Physics, Shiraz University of Medical Sciences, Shiraz, Iran, October 26-28, 2011.
39- Ashrafi H, Bahadori MR, Shariyat M. Modeling of viscoelastic solid polymers using a boundary element formulation with considering a body load. Proceedings of the 2nd International Conference on Advanced Material Research (ICAMR2012), Chengdu, China, January 7-8, 2012 (Advanced Materials Research Vols. 463-464, 2012) pp 499-504. (Indexed in Scopus)
40- Ashrafi H, Bahadori MR, Shariyat M. Two-Dimensional Modeling of Functionally Graded Viscoelastic Materials Using a Boundary Element Approach. Proceedings of the 2nd International Conference on Advanced Material Research (ICAMR2012), Chengdu, China, January 7-8, 2012 (Advanced Materials Research Vols. 463-464, 2012) pp 570-574. (Indexed in Scopus)
41- Shariyat M, Band Band H, Ashrafi H. Modeling and vibration response analysis of a human skull system with a viscoelastic nature. IEEE-Proceedings of 18th Iranian Conference on BioMedical Engineering (ICBME2011), Tarbiat Modares University, Tehran, Iran, December 14-16, 2011. (Indexed in Scopus)
42- Hamisi M, Shariyat M. Three-dimensional finite element interlayer Van der Waals force modeling and vibration analysis of the multiwalled carbon nanotubes. 1st International Conference on Nanostructures and Nanomaterials: Science and Application (nanotech2012), Masjed-Soleiman, Iran, February 7-9, 2012.
43- Ashrafi H, Shariyat M. Thermoviscoelastic analysis of three-dimensional orthotropic polymeric structures using a general finite element formulation. 10th International Seminar on polymer Science & Technology (ISPST2012), Amirkabir University of Technology, Tehran, Iran, October 21-25, 2012.
44- Ashrafi H, Shariyat M. Relaxation effects of viscoelasticity and time-dependent Poisson's ratio on nanoindentation measurements of solid polymers. 10th International Seminar on polymer Science & Technology (ISPST2012), Amirkabir University of Technology, Tehran, Iran, October 21-25, 2012.
45- Shariyat M, Ashrafi H, BandBand H. Modelling Of energy absorber on helmet by using polymeric foams. 10th International Seminar on polymer Science & Technology (ISPST2012), Amirkabir University of Technology, Tehran, Iran, October 21-25, 2012.
46- Kabiri M, Davar A, Shariyat M, Khalili SMR. Development of an innovative fabrication method for orthogonally stiffened composite cylindrical shells. 3rd International Conference on Composites: Characterization, Fabrication, and Application (CCFA-3), Tehran, Iran, December 18-19, 2012.
47- Ashrafi H, Shariyat M. Material nonhomogeneity modeling of functionally graded viscoelastic materials using boundary & finite element techniques. 3rd International Conference on Composites: Characterization, Fabrication, and Application (CCFA-3), Tehran, Iran, December 18-19, 2012.
48- Farzan F, Shariyat M. Applying an analytical solution in evaluating the response of rectangular plates made of functionally graded materials subjected to a dynamic load. 3rd International Conference on Composites: Characterization, Fabrication, and Application (CCFA-3), Tehran, Iran, December 18-19, 2012.
49- Mokhtari M, Khalili SMR, Shariyat M. Numerical study of central cracked aluminum plate repaired with composite patches under transient dynamic loading. 3rd International Conference on Composites: Characterization, Fabrication, and Application (CCFA-3), Tehran, Iran, December 18-19, 2012.
50- Bandband H, Shariyat M, Ashrafi H, Keshmiri H. Reduction of human head injury by designing an energy absorption on helmet from the use of aluminum honeycomb panels. IEEE-Proceeding of the 19th Iranian conference of Biomedical Engineering (ICBME 2012), Tehran, Iran, December 21-22, 2012.(Indexed in Scopus)
51- Botshekanan Dehkordi M, Khalili SMR, Shariyat M. Resonance phenomenon analysis in sandwich structures with SMA reinforced composite face sheets, 2nd International Conference on Acoustics and Vibration (ISAV2012), Sharif University, Tehran, Iran, December 26-27, 2012.
52- Ashrafi H, Shariyat M. A boundary element formulation for standard linear viscoelastic structures made of functionally graded materials. 21st Annual International Conference on Mechanical Engineering (ISME2013), School of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, May 7-9 , 2013.
53- Ashrafi H, Shariyat M. Thermoviscoelastic analysis of three-dimensional orthotropic solid polymers using a general finite element formulation. 21st Annual International Conference on Mechanical Engineering (ISME2013), School of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, May 7-9, 2013.
54- Rajabi I, Shariyat M. Static bending analysis of a sandwich plate using an enhanced high-order plate theory. 21st Annual International Conference on Mechanical Engineering (ISME2013), School of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, May 7-9, 2013.
55- Farzan F, Shariyat M. Evaluating the influence of material distribution on the response of graded materials subjected to impact. 21st Annual International Conference on Mechanical Engineering (ISME2013), School of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, May 7-9, 2013.
56- Mokhtari M, Shariyat M. Failure prediction with Hashin failure criteria and stress analysis in central cracked aluminum plate repaired with composite patches. 21st Annual International Conference on Mechanical Engineering (ISME2013), School of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, May 7-9, 2013.
57- Hosseini SH, Shariyat M, Ghajar R. Numerical elasticity analysis of a sandwich plate with composite face sheets subjected to a biaxial preload. 21st Annual International Conference on Mechanical Engineering (ISME2013), School of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, May 7-9, 2013.
58- Shariyat M, Ghajar RA, Hosseini SH. Effects of the embeded SMA on the eccentric low velocity impact responses of the composite plates. 3rd International Conference on Acoustics and Vibration (ISAV2013), K.N. Toosi University of Technology, Tehran, Iran, December 25-26, 2013.
59- Shariyat M, Ghajar RA, Hosseini SH. Low velocity impact analysis of composite plates with embeded SMA and biaxial pre-tension. 3rd International Conference on Acoustics and Vibration (ISAV2013), K.N. Toosi University of Technology, Tehran, Iran, December 25-26, 2013.
60- Farzan Nasab F, Shariyat M. Influences of the elastic foundation on the semi-analytical low-velocity impact responses of the transversely graded rectangular plate, based on a modified contact stiffness concept. Materials Science Engineering ( MSE-Congress 2014), Germany, Darmstadt, 23-25 September, 2014.
61- Sarvi Z, Shariyat M, Asgari D, Saeidi GH. A comparison among the molecular and finite element structural simulation approaches of the boron nitride nanossheets. 23rd Annual International Conference on Mechanical Engineering (ISME2015), Amirkabir University of Technology, Tehran, Iran, May 12-14, 2015.
62- Karimian A, Shahnazari MR, Shariyat M. Presenting a new numerical procedure based on the panel method as a proper computational shape design tool. The 1st Conference on Science and Basic Research (ICSR2016), Shiraz, Iran, 2015.
63- Shariyat M, Roshanfar M. Low velocity impact of composite plates using the first order shear theory. The International Conference on New Researches in Engineering Sciences, Tehran University, Tehran, Iran, May 25-26, 2016.
64- Kashyzadeh KR, Farrahi GH, Shariyat M, Ahmadian MT. Experimental And Finite Element Studies On Free Vibration Of Automotive Steering Knuckle. ICONTS 3RD International Congress on Technology- Engineering & Science, 09-10 February 2016, Kuala Lumpur, Malaysia.
65- Soltanieh G, Kabir MZ, Shariyat M. The effect of shape memory alloy wires in behavior modification of composite plates with embedded SMA wires under impulse load. The 5th National and the 1st International Conference on Modern Materials and Structures in Civil Engineering, 26-27 October 2016, Amirkabir University of Technology, Tehran, Iran.
66- Soltanieh G, Kabir MZ, Shariyat M. Dynamic response of shallow cylindrical shell under imulse load. The 5th National and the 1st International Conference on Modern Materials and Structures in Civil Engineering, 26-27 October 2016, Amirkabir University of Technology, Tehran, Iran.
67- Pachenari MH, Mozaffari A, Shariyat M. Analysis of effects of the damping parametrs and indenter velocity on dynamic response of a viscoelastic plate. 16th International conference of Iranian Aerospace Society, 21-23 February 2017, K.N. Toosi University of Technology, Tehran, Iran.
68- Hosseini SH, Shariyat M. Effects of preloads on dynamic response of rectangular composite sandwich plates with flexible cores subjected to eccentric low-velocity impact. International Conference on Modern Ideas in Engineering, Science, and Technology. 26 April 2017, Geneva, Switzerland.
69- Soltaneih G, Kabir MZ, Shariyat M. The effect of composite substrate material in enhancement of the stability limit load for the shallow cylindrical shells with embedded shape memory alloy wires. ICCS20 - 20th International Conference on Composite Structures, 4-7 September, 2017, Paris, France.
70- Soltaneih G, Kabir MZ, Shariyat M. A Comparison between snapping instability of composite shallow cylindrical shells hybrid with shape memory alloy and stell wires. ICCS20 - 20th International Conference on Composite Structures, 4-7 September, 2017, Paris, France.
71- Shariyat M, Ghaforinam M. Analysis of the moisture effect on creep behavior of the FGM spherical under thermomechanical loads. 25th International Conference on Mechanical Engineering (ISME2017), May 2-4, 2017, Tarbiat Modares, Tehran, Iran.
72- Shariyat M, Ghaznavi A. Nonlinear dynamic analysis of sandwich plates with soft cores and composite face sheets reinforced by SMA wires whose material properties in tension and compression. 25th International Conference on Mechanical Engineering (ISME2017), 2-4 May , 2017, Tarbiat Modares, Tehran, Iran.
73- Reza Kashyzadeh K, Farrahi GH, Shariyat M, Ahmadian MT. Experimental and probabilistic approach for assessing fatigue life of automotive steering knuckle. The 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), 24-26 April, 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
74- Hosseini SH, Shariyat M. Investigation of the indenter velocity and boundary conditions effects on low-velocity response of a composite plate reinforced by a shape memory alloy, based on a modified contact law. The 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), 24-26 April, 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
75- Shariyat M, Hosseini SH. Evaluation of effects of the volume fraction of the shape memory alloy and its orientation on dynamic response of a composite plate, using the finite element method. The 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), 24-26 April, 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
76- Hosseini SH, Shariyat M. Proposing a novel global-local theory for dynamic response analysis of sandwich composite plates with flexible auxetic cores. The 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), 24-26 April, 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
77- Shariyat M, Hosseini SH. Analysis of influence of the soft auxetic core on low-velocity impact response of a sandwich composite plate reinforced by a shape memory alloy, based on a new global-local theory. The 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), 24-26 April, 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
78- Hosseini SH, Shariyat M. Investigation of effects of the core stiffness on dynamic response of a sandwich composite plate reinforced by a shape memory alloy, considering the non-uniform and time-dependent distribution of the phases. The 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), 24-26 April, 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
79- Hosseini SH, Shariyat M. Investigation of effect of the indenter velocity and boundary conditions on low-velocity response of a composite plate reinforced by a shape memory alloy, based on a new high-order global-local hyperbolic theory. 11th International Congress on Civil Engineering (11ICCE), 8-10 May 2018, School of Civil Engineering, University of Tehran, Tehrn, Iran.
80- Shariyat M, Hosseini SH. Proposin a new higher-order hyperbolic global-local theory for low-velocity impact analysis of sandwich rectangular plates with composite face sheets and flexible auxetic cores. 11th International Congress on Civil Engineering (11ICCE), 8-10 May 2018, School of Civil Engineering, University of Tehran, Tehrn, Iran.
81- Khani Arani H, Shariyat M, Jafari AA. Effect of viscoelastic medium on vibration response of magnetostrictive nano-plate. The 8th International Conference on Acoustics & Vibration (ISAV2018), 4-5 Dec, 2018, Shahid Beheshti University, Tehran, Iran.
82- Pasandidehpoor M, Shariyat M, Vincze GT, Lopes ALB, Pereira AMB. Multi-objective design optimization for wide tapered multi-cell energy absorber made of aluminum. 3rd Doctoral Congress in Engineering (DCE 2019),27-28 June, 2019, FEUP, Porto, Portugal.
83- Khani Arani H, Shariyat M, Mohammadian A.Vibration frequency analysis of sandwich nano-plate on visco Pasternak foundation by using modified couple stress theory. 7th International Conference on Mechanical Engineering, Materials, and Metallurgy, 9 March 2022, Tbilisi, Georgia.
84- Khani Arani H, Shariyat M. Nonlinear dynamic response of a rubber-like hyperelastic beam under distributed load and resting on a Pasternak foundation. 30th Annual International Conference of Iranian Society of Mechanical Engineers 10 to 12 May, 2022, Tehran, Iran.
B) National Conference Papers
1- Shariyat M, Shahani AR, Abaie Bagheri M. Stability analysis of composite plates assuming large deformations and employing high-order theories. 1st Iranian Conference on Thin Walled Structures, Urmia University, Urmia, Iran, 2002.
2- Kazemi M, Shariyat M, Ghanbari F. An efficient method for simulation of the welding process by the finite element method. 10th Conference on Marine Industries, Abadan-Khoramshahr, Iran, October 2008.
3- Shariyat M, Azadi S, Zahedi F, Azadi M. Damage analysis of antiroll bar comparing experimental and theoretical results. National Conference of Mechanical Engineering (NCME2008), Islamic Azad University of Khomeinishahr, Iran, November 2008.
4- Azadi Sh, Shariyat M, Azadi M, Zahidi F. Frequency map extraction of a full vehicle for vibration behavior optimization. National Conference of Mechanical Engineering (NCME2008), Islamic Azad University of Khomeinishahr, Iran, November 2008.
5- Shariyat M, Jafari A. Pournaghi Y, Azadi M. Free and forced vibration analysis and optimization of a full finite element model of a truck. National Conference of Mechanical Engineering (NCME2008), Islamic Azad University of Khomeinishahr, Iran, November 2008.
6- Shariyat M, Azadi S, Abedini M. Dynamic force and stress analysis of a connecting rod of Pride Passenger car. National Conference of Mechanical Engineering (NCME2008), Islamic Azad University of Khomeinishahr, Iran, November 2008.
7- Heshavarz A, Bayani M, Azadi Sh, Shariyat M. Sensitivity modal analysis of the chasis frame components. National Conference of Mechanical Engineering (NCME2008), Islamic Azad University of Khomeinishahr, Iran, November 2008.
8- Fathi Sola J, Shariyat M, Jazayeri SA. Dynamic analysis of a national engine through combustion simulation. 6th Annual Student Conference on Mechanical Engineering (STU2009), Amirkabir University of Technology, Tehran, Iran, March 3-5, 2009.
9- Alinejad F, Fathi Sola J, Shariyat M, Jafari A. Thin rectnagular square FGM plates under uniform and hydrostatic loads, using the first-order shear-deformation theory. 6th Annual Student Conference on Mechanical Engineering (STU2009), Amirkabir University of technology, Tehran, Iran, March 3-5, 2009.
10- Hamisi M, Shariyat M. Determination of the radial vibration modes of the multi-walled carbon nanotubes based on the theory of elasticity and FEM approaches. 1st National Conference on Nanomaterials and Nanotechnology (1CNN), Shahrood,Iran, February 29- March 1, 2012.
11- Shariyat M, Mohseni Shakib M, Nadaf AR, Rezaei Mazyak AH, Mohammadi MR. Investigation of the viscoelastic behavior effects of the material on elasticity results of the plates and shells, using a finite element software. 1st National Conference on Mechanical Systems Simulation (NCMSS01), Ahvaz, Iran, February 22-23, 2012.
12- Rezaei Mazyak AH, Mohammadi MR, Shariyat M, Mohseni Shakib M, Nadaf AR. Investigation of effects of the viscoelscoelastic effects of the material properties on elasticity fundamental natural frequency of the composite plates and shells, using ABAQUS. 3rd Conference in the Manufacturing Engineering (NMEC2012), Najafabad, Iran, February 22-23, 2012.
13- Hosseini SH, Shariyat M, Ghajar R. 3D finite element analysis of eccentric low-velocity impact of a sandwich plate with composite face sheets. National conference on Mechanical Engineering (NCME2013), Malayer, Iran, 30 May, 2013.
14- Hosseini SH, Shariyat M. 3D finite element analysis of low-velocity impact of a sandwich plate with composite face sheets and adamping treatment viscoelastic core. National conference on Mechanical Engineering (NCME2013), Malayer, Iran, 30 May, 2013.
15- Shariyat M, Roshanfar M. Low velocity impact analysis of a composite plate on point supports. 3rd National Conference on Development of Civil Engineering, Architecture, Electricity and Mechanical in Iran, Gorgan, May 26, 2016.
K.N. Toosi University of Technology
Pardis St. , Molla-Sadra Avenue, Vanak. Sq. , Tehran, Iran
Tell: (+98 21) 8867 4841-8 Fax: (+98 21) 8867 4748
P.O Box: 19395-1999 Postal Code: 19991 43344
Website: www.kntu.ac.ir
Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is
replaced by K )
