Book Chapter
- Abbas Montazeri, Behzad Mehrafrooz, "Theoretical Modeling of CNT-Polymer Interactions", A Book Chapter in Carbon Nanotube-Reinforced Polymers (Editor: R. Rafiee), Elsevier (2017), 347-383.
Publications in international refereed journals
- G. Jamirad, A. Montazeri, A. Rajabpour, "Enhanced interfacial thermal conductance in functionalized Boron Nitride/Polylactic acid nanocomposites: A molecular dynamics study", Progress in Organic Coatings, 186 (2024) 108037.
- A. Kardani, A. Montazeri, H.M. Urbassek, "Strain-rate-dependent plasticity of Ta-Cu nanocomposites for therapeutic implants", Scientific Reports, 13 (2023) 15788.
- S. A. Mousavi, A. Montazeri, "Predicting Mechanical Properties of Defective h-BN Nanosheets using Data-Driven Models", Computational Materials Science, 228 (2023) 112380.
- A. Abedini, A. Malti, A. Kardani, A. Montazeri, "Probing crack growth mechanisms and tensile properties of sintered multi-nanoparticle Al-Cu systems via MD simulation", Advanced Powder Technology, 34 (2023) 104084.
- A. Kardani, A. Montazeri, H.M. Urbassek, "Computational analysis of the mechanical properties of Ta/Cu nanocomposite dental implants: On the role of incoherent interfaces", Metals and Materials International , 29 (2023) 2385-2397.
- A. Kardani, A. Montazeri, H.M. Urbassek, "Unraveling the temperature-dependent plastic deformation mechanisms of polycrystalline Ta implants through numerical analysis of grain-boundary dynamics", Journal of Materials Science , 57 (2022) 16490-16506.
- Mohammad Amini, Abbas Montazeri, "Investigating the effect of poly (D L-Lactic Acid) molecular weight on the shape memory parameters: A molecular dynamics study", New Processes in Materials Engineering, 16 (2022) 1-11 (in Persian).
- Mahdi Seif, Abbas Montazeri, "Molecular dynamics simulation reveals the reliability of Brij-58 nanomicellar drug delivery systems for flurbiprofen", Journal of Molecular Liquids, 360 (2022) 119496.
- A. Abedini, A. Montazeri, A. Malti, A. Kardani, "Mechanical properties are affected by coalescence mechanisms during sintering of metal powders: Case study of Al-Cu nanoparticles by molecular dynamics simulation", Powder Technology, 405 (2022) 117567.
- Sepehr Rastegar, Abbas Montazeri, "Atomistic insights into the toughening role of surface-treated boron nitride nanosheets in PLA-based nanocomposites", European Polymer Journal, 168 (2022) 111071.
- Mohammad Amini, Reza Amini Gazik, Farhang Honarvar, Abbas Montazeri, "Analysis of failure mechanisms of degraded hybrid glass-carbon composites in acidic medium: Insights from acoustic emission analysis", Engineering Failure Analysis , 134 (2022) 106082.
- Mohammad Amini, Kourosh Hasheminejad, Abbas Montazeri, "Engineering the shape memory parameters of graphene/polymer through atomistic simulations: On the effect of nanofiller surface treatment", Smart Materials and Structures, 31 (2022) 025010.
- Amir Hossein Atabaki, Abbas Montazeri, Hashem Rafii-Tabar, Pezhman Sasanpour, "Determination of the optimal location of samples on quartz tuning fork-based biosensors: A computational study", Biomodeical Physics & Engineering Express, 7 (2021) 065024.
- Abolfazl Malti, Arash Kardani, Abbas Montazeri, "An insight into the temperature-dependent sintering mechanisms of metal nanoparticles through MD-based microstructural analysis", Powder Technology, 386 (2021) 30-39.
- Kourosh Hasheminejad, Abbas Montazeri, Hooman Hasheminejad, "Tailoring adhesion characteristics of poly(L-lactic acid)/graphene nanocomposites by end-grafted polymer chains: An atomic-level study", European Polymer Journal, 148 (2021) 110351.
- Mohammad Amini, Abbas Montazeri, Shuying Wu, Corrigendum to "Designing a polymer blend nanocomposite with triple shape memory effects", Composites Communications, 24 (2021) 100592.
- Mohammad Amini, Kourosh Hasheminejad, Abbas Montazeri, "Experimentally guided MD simulation to enhance the shape memory behavior of polymer-based nanocomposites: Towards elaborating the underlying mechanism", Composites Part A: Applied Science and Manufacturing, 138 (2020) 106055.
- M. Mohebali, N. Rezapour, P. Shadmani, A. Montazeri, "An MD-based systematic study on the mechanical characteristics of a novel hybrid CNT/graphene drug carrier", Journal of Molecular Modeling, 26 (2020) 241.
- A. Zare, P. Sedigh, A. Montazeri, "Enhancing multi-functional capabilities of boron-nitride nanosheets through defect engineering", Journal of Materials Science, 55 (2020) 12995-13007.
- A. Kardani, A. Montazeri, "Metal-matrix nanocomposites under compressive loading: Towards an understanding of how twinning formation can enhance their plastic deformation", Scientific Reports, 10 (2020) 9745.
- Mahdi Tavakol, Abbas Montazeri, S. Hamed Aboutalebi, Reza Asgari, "Mechanical properties of graphene oxide: the impact of functional groups", Applied Surface Science, 525 (2020) 146554.
- Fatemeh Momeni, Behzad Mehrafrooz, Abbas Montazeri, Ali Rajabpour, "MD-based design of bilayer graphene-hBN heterostructures: an insight into enhanced thermal transport", International Journal of Heat and Mass Transfer, 150 (2020) 119282.
- M. Sadegh Alborzi, A. Rajabpour, A. Montazeri, "Heat transport in 2D van der Waals heterostructures: An analytical modeling approach", International Journal of Thermal Sciences, 150 (2020) 106237.
- P. Shadmani, B. Mehrafrooz, A. Montazeri, R. Naghdabadi, "Protein corona impact on nanoparticle-cell interactions: Toward an energy-based model of endocytosis", Journal of Physics: Condensed Matter, 32 (2020) 115101 (12pp).
- Soroosh Mohammadi, Abbas Montazeri, Herbert M. Urbassek, "Geometrical aspects of nanofillers influence the tribological performance of Al-based nanocomposites", Wear, 444-445 (2020) 203117.
- Kourosh Hasheminejad, Abbas Montazeri, "Enhanced interfacial characteristics in PLA/graphene composites through numerically-designed interface treatment", Applied Surface Science, 502 (2020) 144150.
- P. Sedigh, A. Zare, A. Montazeri, "Evolution in aluminum applications by numerically-designed high strength boron-nitride/Al nanocomposites", Computational Materials Science, 171 (2020) 109227.
- A. Bagheri Tirtash, A. Montazeri, R. Eslami-Farsani, A. Shahrabi-Farahani, "An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles", Journal of Science and Technology of Composites , 6 (2020) 525-532 (in Persian).
- Maryam Azizinia, Behzad Mehrafrooz, Abbas Montazeri, Ali Rajabpour, "Thermal transport engineering in single layered graphene sheets via MD simulations: on the effect of nickel coating", International Journal of Thermal Sciences, 138 (2019) 416-424.
- A. Montazeri, B. Panahi, "MD-based estimates of enhanced load transfer in graphene/metal nanocomposites through Ni coating", Applied Surface Science, 457 (2018) 1072-1080.
- A. Kardani, A. Montazeri, "MD-based characterization of plastic deformation in Cu/Ag nanocomposites via dislocation extraction analysis: Effects of nanosized surface porosities and voids", Computational Materials Science, 152 (2018) 381-392.
- M. Karimi, R. Ghajar, A. Montazeri, "A novel interface-treated micromechanics approach for accurate and efficient modeling of CNT/polymer composites", Composite Structures, 201 (2018) 528-539.
- Mahdi Tavakol, Abbas Montazeri, Reza Naghdabadi, Mohammad J. Hajipour, Saeid Zanganeh, Giulio Caracciolo, Morteza Mahmoudi, "Disease-related metabolites affect protein-nanoparticle interactions", Nanoscale, 10 (2018) 7108-7115.
- A. Kardani, B. Mehrafrooz, A. Montazeri, "MD-based computational design of new engineered Ni-based nanocatalysts: An in-depth study of the underlying mechanism", The European Physical Journal Plus, 133 (2018) 88 (9 pp).
- A. Kardani, A. Montazeri, "Temperature-based plastic deformation mechanism of Cu/Ag nanocomposites: A molecular dynamics study", Computational Materials Science, 144 (2018) 223-231.
- A. Montazeri, A. Mobarghei, "Nanotribological behavior analysis of graphene/metal nanocomposites via MD simulations: New concepts and underlying mechanisms", Journal of Physics and Chemistry of Solids, 115 (2018) 49-58.
- M. Barfmal, A. Montazeri, "MD-based design of SiC/graphene nanocomposites towards better mechanical performance", Ceramics International, 43 (2017) 17167-17173.
- M. Karimi, R. Ghajar, A. Montazeri, "Investigation of nanotubes' length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites", Journal of Science and Technology of Composites , 4 (2017) 229-240 (in Persian).
- A. Montazeri, S. Kamrava, M.H.H. Yeganeh, "Assessment of dominant factors affecting the fracture toughness of polymer/clay nanocomposites using finite element method", Journal of Reinforced Plastics and Composites, 36 (2017) 1545-1553.
- P. Shadmani, A. Montazeri, N. Taherifar, B. Motevalli, "Telescopic oscillations of double-walled carbon nanotubes in the presence of an inner semi-infinite tube", International Journal of Mechanical Sciences, 121 (2017) 187-198.
- S. Bashirvand, A. Montazeri, "FEM analysis of metal matrix nanocomposites reinforced with off-line atomistically-informed equivalent nanofillers", Computational Materials Science, 129 (2017) 89-97.
- M. Karimi, A. Montazeri, R. Ghajar, "On the elasto-plastic behavior of CNT-polymer nanocomposites", Composite Structures, 160 (2017) 782-791.
- M. Paryavi, A. Montazeri, T. Tekyeh, P. Sasanpour, "Nanoscale deflection of a cantilever-based biosensor using MOSFET structure: A theoretical analysis", Superlattices and Microstructures, 98 (2016) 116-120.
- M. Malakouti, A. Montazeri, "Nanomechanics analysis of perfect and defected graphene sheets via a novel atomic-scale finite element method", Superlattices and Microstructures, 94 (2016) 1-12.
- M. Malakouti, A. Montazeri, "Nanomechanics analysis of graphene via development of an MD-based AFEM", Modares Mechanical Engineering, 16 (2016) 1-9 (in Persian).
- S. Bashirvand, A. Montazeri, "New aspects on the metals reinforcement by carbon nanofillers: A molecular dynamics study", Materials and Design, 91 (2016) 306-313.
- S. Akbari Shandiz, A. Montazeri, "A novel MD-based procedure to obtain the interphase Young's modulus in nanocomposites", Computational Materials Science, 113 (2016) 104-111.
- A. Montazeri, S. Ebrahimi, A. Rajabpour, H. Rafii-Tabar, "Molecular dynamics modeling of buckling behavior of hydrogenated graphYne”, Nano, 10 (2015) 1550105 (8 pages).
- A. Montazeri, S. Ebrahimi, H. Rafii-Tabar, "A Molecular dynamics investigation of buckling behaviour of hydrogenated graphene", Molecular Simulation, 41 (2015) 1212-1218.
- Morteza Mahmoudi, Samuel E. Lohse, Catherine J. Murphy, Arman Fathizadeh, Abbas Montazeri, and Kenneth S. Suslick, "Variation of protein corona composition of gold nanoparticles following plasmonic heating", Nano Letters, 14 (2014) 6-12.
- B. Motevalli, A. Montazeri, J.Z. Liu, H. Rafii-Tabar, "Comparison of continuum-based and atomistic-based modeling of axial buckling of carbon nanotubes subject to hydrostatic pressure", Computational Materials Science, 79 (2013) 619-626.
- S. Ebrahimi, A. Montazeri, H. Rafii-Tabar, "Molecular dynamics study of a new mechanism for ripple formation on graphene nanoribbons at very low temperatures based on H2 physisorption", Solid State Communications, 159 (2013) 84-87.
- S. Ebrahimi, A. Montazeri, H. Rafii-Tabar, "Molecular dynamics study of the interfacial mechanical properties of the graphene-collagen biological nanocomposite", Computational Materials Science, 69 (2013) 29-39.
- B. Motevalli, A. Montazeri, R. Tavakoli-Darestani, H. Rafii-Tabar, "Modeling the buckling behavior of carbon nanotubes under simultaneous combination of compressive and torsional loads", Physica E: Low dimensional systems, 46 (2012) 139-148.
- A. Montazeri, H. Rafii-Tabar, “Multiscale modeling of graphene- and nanotube-based reinforced polymer nanocomposites”, Physics Letters A, 375 (2011) 4034-4040.
- R. Ansari, B. Motevalli, A. Montazeri, S. Ajori, “Fracture analysis of single layer graphene sheets with double vacancy defects via MD simulations”, Solid State Communications, 151 (2011) 1588.1597.
- A. Montazeri, M. Sadeghi, R. Naghdabadi, H. Rafii-Tabar, “Multiscale modelling of the effect of carbon nanotube orientation on the shear deformation properties of reinforced polymer-based composites”, Physics Letters A, 375 (2011) 1588.1597.
- A. Montazeri, M. Sadeghi, R. Naghdabadi, H. Rafii-Tabar, “Computational modeling of the transverse-isotropic elastic properties of single-walled carbon nanotubes”, Computational Materials Science, 49 (2010) 544-551.
- A. Montazeri, R. Naghdabadi, “Investigation of the interphase effect on the mechanical behavior of CNT/polymer composites by multiscale modeling”, Journal of Applied Polymer Science, 117 (2010) 361-367.
- A. Montazeri, R. Naghdabadi, “Investigating the effect of CNT defects on the column and shell buckling of CNT-polymer composites using multiscale modeling”, International Journal for Multiscale Computational Engineering, 7 (2009) 435-444.
- A. Montazeri, R. Naghdabadi, “Study the effect of viscoelastic matrix model on the stability of CNT/polymer composites by multiscale modeling”, Polymer Composites, 30 (2009) 1545-1551.
Contributions to conference proceedings
- A. Montazeri, "Advancing the mechanical and thermal properties of PLA nanocomposites through numerically-designed interface treatment: Insights from MD simulations", Advanced Functional Materials, Invited Speaker, Times Scientific Group, Dubai (2024).
- A. Montazeri, S. Rastegar, "Tailoring the toughness of PLA with the aid of surface-treated boron-nitride nanosheets: A molecular dynamics study", International Chemistry Conference, Invited Speaker, Virtual Event (2022).
- A. Montazeri, "Tailoring interfaces in polymer-based nanocomposites via nanofiller surface treatment: An insight from molecular dynamics simulations", International Conference on Polymer Science and Composite Materials, Invited Speaker, Virtual Event (2021).
- A. Montazeri, A. Amini, K. Hasheminejad, "Shape-memory behavior analysis of polylactic acid/graphene nanocomposites: A molecular dynamics study", Molecular and Materials Simulation at the Turn of the Decade, EPFEL, Lausanne, Switzerland (2019).
- A. Montazeri, A. Kardani, "Mechanical behavior analysis of metal-based nanocomposites via MD simulations: Fundamentals, concepts, and underlying mechanisms", Molecular and Materials Simulation at the Turn of the Decade, EPFEL, Lausanne, Switzerland (2019).
- A. Montazeri, B. Panahi, "Ni-coated graphene sheets enhance the interfacial strength in metal-based nanocomposites", Emergence of Surface and Interface Structure from Friction, Fracture and Deformation, EPFEL, Lausanne, Switzerland (2018).
- A. Montazeri, M. Azizinia, B. Mehrafrooz, A. Rajabpour, "Nickel coating effects on the thermal conductivity of graphene: A molecular dynamics study", MaX Conference on the Materials Design Ecosystem at the Exascale: High-Performance and High-Throughput Computing, Trieste, Italy (2018).
- A. Montazeri, Gh. Omrani, A. Rajabpour, "MD-based estimates of thermal conductivity of single-layer MoS2 in the presence of monatomic vacancies", MaX Conference on the Materials Design Ecosystem at the Exascale: High-Performance and High-Throughput Computing, Trieste, Italy (2018).
- A. Montazeri, A. Kardani, "The role of spherical voids on the deformation mechanism of Cu/Ag nanocomposites via MD simulation", 5thConference on Nano- and Micromechanics, Wroclaw, Poland, (2017).
- A. Montazeri, B. Mehrafrooz, A. Vasegh, "Penetration of carbon nanostructures into lipid bilayer cell membranes: A molecular dynamics study", 5thConference on Nano- and Micromechanics, Wroclaw, Poland, (2017).
- H. Montazeri, M. Ahmadi, A. Montazeri, T. Tekieh, P. Sasanpour, "Optimization of growth medium position for improved operation of quartz tuning fork biosensor", 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), Pullman Bangsar, Malaysia (2016).
- A. Kardani, A. Montazeri, "Investigation on effect of surface and bulk porosities on yield strength, elastic modulus, and tensile strength of Cu nanofiller", 5th International Conference on Materials Engineering and Metallurgy, Shiraz University, Shiraz, Iran (2016).
- A. Kardani, A. Montazeri, "Temperature dependence of stacking faults formation, yield strength, and modulus of Ag nanofillers in compression: A molecular dynamics study", 5th International Conference on Materials Engineering and Metallurgy, Shiraz University, Shiraz, Iran (2016).
- A. Montazeri, "Molecular dynamics simulation of hydrogen storage in graphene-like MoS2 nanosheets", College on Multiscale Computational Modeling of Materials for Energy Applications, Trieste, Italy (2016).
- A. Montazeri, M. Malakouti, "Nanomechanics of graphene monolayers: a new Atomic-scale Finite Element Method (AFEM)", ANM2015: 1st International Conference on Graphene Technology, Aveiro, Portugal (2015).
- A. Montazeri, S. Bashirvand, "Investigating the effect of nanofiller geometry on the elastic constants of metal-based nancocomposites: A molecular dynamics study", ANM2015: 6thInternational Conference on Advanced Nanomaterials, Aveiro, Portugal (2015).
- A. Montazeri, S. Ebrahimi, A. Rajabpour, H. Rafii-Tabar, "Mechanical properties of graphYne under hydrogen adsorption: A molecular dynamics study", ANM2015: 1st International Conference on Hydrogen Energy, Aveiro, Portugal (2015).
- A. Montazeri, H. Rafii-Tabar, “Investigation of the nano-inclusion geometrical effects on the elastic constants of polymer nanocomposites using multiscale modeling approach”, 21thAnnual International Conference on Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran (2013).
- A. Montazeri, "Graphene-based polymer nancocomposites: Multiscale modeling towards experimental results", Frontiers of NanoMechanics, Trieste, Italy (2013).
- A. Montazeri, "Investigation of the effects of H2 physisorption on the Young’s modulus of graphene polymer nanocomposites using MD/FE multiscale modeling approach", Frontiers of NanoMechanics, Trieste, Italy (2013).
- A. Montazeri, M. Sadeghi, R. Naghdabadi, H. Rafii-Tabar, “Study the effect of carbon nanotube orientation on the shear modulus of SWCNT/polymer composites using hierarchical MD/FE multiscale modeling”, 6th Nanoscience and Nanotechnology Conference, Izmir, Turkey (2010).
- A. Montazeri, H. N. Pishkenari, A. Meghdari, R. Naghdabadi, “Tip and Sample Elasticity Effect in NC-AFM Surface Characterization of Nanostructures: Influence of Temperature”, Joint ICTP-FANAS Conference on Trends in Nanotribology, Trieste, Italy (2009).
- A. Montazeri, S. H. Mahboobi, A. Meghdari, R. Naghdabadi, “Effect of Double-layer Substrates on Manipulation of Metallic Nanoclusters: A Molecular Dynamics Study”, Joint ICTP-FANAS Conference on Trends in Nanotribology, Trieste, Italy (2009).
- A. Montazeri, R. Naghdabadi, H. Rafii-Tabar, “Study of the role of the interphase layer in the mechanical behavior of SWCNT/polymer composites using three-phase multiscale modeling”, 7th Nanotechnology Iranian Students Conference, Tarbiat Modares University, Tehran, Iran.
- A. Montazeri, R. Naghdabadi, “Investigation the stability of SWCNT/polymer composites in the presence of CNT geometrical defects using multiscale modeling”, Proceedings of the forth international conference on Multiscale Material Modeling (MMM2008), USA, Florida, (2008) 163- 166.
- A. Montazeri, R. Naghdabadi, “Study the effect of interphase layer on the Young’s modulus of CNT/Polymer composites using a new three-phase multiscale modeling approach”, China NANO 2009, Beijing, China.
- A. Montazeri, R. Naghdabadi, “Study of the mechanical behavior of by CNT/polymer composites by MM/FE multiscale modeling”, Proceedings of the Second Conference on Nanostructures, Iran, Kish, (2008) 410-411.
Faculty of Merials Science and Engineering, K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)
Tell: (+98 21) 8867 4841-8 Fax: (+98 21) 8867 7274
Website: www.kntu.ac.ir
Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )