Journal papers

•  Asgari M., Akhlaghi M., Transient Heat Conduction in Two-Dimensional Functionally Graded Hollow Cylinder with Finite Length, Heat and Mass Transfer, (2009) 45: 1383-1392.

• Asgari M., Akhlaghi M., Hosseini S.M, Dynamic Analysis of Two-Dimensional Functionally Graded Thick Hollow Cylinder with Finite Length under Impact Loading, Acta Mechanica, (2009) 208: 163-180.

• Asgari M., Akhlaghi M., Transient Thermal Stresses in Two-Dimensional Functionally Graded Thick Hollow Cylinder with Finite Length, Archive of Applied Mechanics, (2010) 80: 353–376.

• Asgari M., Akhlaghi M., Free Vibration Analysis of 2D-FGM Thick Hollow Cylinder Based on Three Dimensional Elasticity Equations, European Journal of Mechanics A/Solids, 30 (2011) 72-81. Ranked 7^th in Science Direct Top 25 Hottest Articles of 2011 full year.

• Asgari M., Akhlaghi M., Thermo-mechanical Stresses in Two-Dimensional Functionally Graded Thick Hollow Cylinder with Finite Length, Advances in Structural Engineering, (2012 ) Vol. 14 No. 6.

• Asgari M., Dynamic Interaction Analysis of Non-uniform Cross-Section Beam Structure under Moving Vehicles, International Journal of Acoustics and Vibration, (2014) , 22(2), pp. 151-160.

• Asgari M., Vibrational Mode Shapes of 2D-FGM Highly Thick Hollow Cylinder Based on Exact Elasticity Theory, Journal Of Theoretical And Applied Mechanics, (2014) Accepted.

•  Asgari M., Optimal Material tailoring of 2D-FGM Hollow Cylinder for a Prescribed Temperature Field in Transient Heat Conduction, IMechE Part L: Journal of Materials Design and Applications, (2014 ), Vol. 230(2) 470–483.

• Asgari M., Free Vibration Analysis of Functionally Heterogeneous hollow Cylinder Based on Three Dimensional Elasticity Theory, International Journal of Acoustics and Vibration, (2015), 21(4), pp. 429-439.

• Asgari M., Material distribution optimization of 2D heterogeneous cylinder under thermo-mechanical loading, Structural Engineering and Mechanics, (2015) Vol. 53, No. 4  703-723.

• M. Shariyat, Z. Sarvi and M. Asgari, Closed-form Molecular Mechanics Formulations for the 3D Local Buckling and 2D Effective Young’s Modulus of the Nanosheets (2015) Journal of Computational Applied Mechanics.

• Z. Sarvi, M. Asgari, M. Shariyat, H. Saeidi Googarchin, Explicit expressions describing elastic properties and buckling load of BN nanosheets due to the effects of vacancy defects, Superlattices and Microstructures (2015) Vol. 88, 668-678.

• Asgari M., Material Optimization of Functionally Graded Heterogeneous Cylinder for Wave Propagation, (2016) Journal of Composite Materials, Volume 50, Issue 25, Pages 3525-3538.

• M. Shariyat, Z. Sarvi and M. Asgari, A unit-cell-based three-dimensional molecular mechanics analysis for buckling load, effective elasticity and Poisson’s ratio determination of the nanosheets, Molecular Simulation, (2016) Vol. 42, No. 5, 353–369.

•  M. B. Azimi, M. Asgari, A new bi-tubular conical–circular structure for improving crushing behavior under axial and oblique impacts, International Journal of Mechanical Sciences (2016) Vol.105, 253–265.

• B. Azimi, M. Asgari, Energy absorption characteristics and a meta-model of miniature frusta under axial Impact, International Journal of Crashworthiness, (2016), 21(3), pp. 222-230
  

• D.  Sharifikia, M. Asgari, DYNAMIC ANALYSIS OF HEALTHY AND EDGE-TO-EDGE REPAIRED MITRAL VALVE BEHAVIOR SUBJECTED TO HIGH G ACCELERATIONS, Journal of Mechanics in Medicine and Biology, (2016), Vol. 17. No. 2.

•  M. Asgari, S. S. Hashemi,  New constitutive equation for dynamic visco-hyperelastic behavior of elastomer bushing, Structural Engineering and Mechanics, (2016),Vol. 59, No. 4 (2016) 601-619.

•  M. Asgari, Sh. Keyvanian, Crash injury analysis of knee joint considering pedestrian safety, Journal of Biomedical Physics and Engineering, (2016), Accepted.
  

• Asgari M., Khanmohammadi A., Parsa M.,  Cyclic Plasticity Behavior of Thick Walled FGM Cylinder Based on Nonlinear Kinematic Hardening (2016) Tabriz Journal of Mechanical Engineering.

• Noamani A., Niestanak V. D., Asgari M., A 3D Unpressurized Model for Non Linear Dynamic Analysis of Human Aortic Valve in Dynamic Condition (2017) Moddares Journal of Mechanical Engineering.

•  Hashemi S. S., Asgari M., Development and Calibration of 3D Constitutive Equations for Nonlinear Passive Multi-Axial Finite Deformations of Skeletal Muscles (2017) Moddares Journal of Mechanical Engineering.

•  Dehghanian M. A., Asgari M., Investigation and Optimization of Multi-walled Multi-cell Energy Absorbers considering Different Cross-sections (2017) Tabriz Journal of Mechanical Engineering.

• Shamshiri M. A., Asgari M., Developing a nonlinear model for Thermoelectric coupling and experimental and numerical analysis of Thermoelectric generator setup (2018) Moddares Journal of Mechanical Engineering. 

• Allahyari, E., Asgari, M., Jafari, A.A. Nonlinear size-dependent vibration behavior of graphene nanoplate considering surfaces effects using a multiple-scale technique (2018) Mechanics of Advanced Materials and Structures, .

•  Asgari, M., Babaee, A., Jamshidi, M. Multi-objective optimization of tapered tubes for crashworthiness by surrogate methodologies (2018) Steel and Composite Structures, 27 (4), pp. 427-438.

• Allahyari, E., Asgari, M. Vibration behavior of nanocomposite plate reinforced by pristine and defective graphene sheets; an analytical approach (2018) International Journal of Engineering, Transactions A: Basics, 31 (7), pp. 1095-1102.

• Mahbod, M., Asgari, M. Energy absorption analysis of a novel foam-filled corrugated composite tube under axial and oblique loadings (2018) Thin-Walled Structures, 129, pp. 58-73.
  

• Golzari, A., Asgari, M. Dynamic analysis and wave propagation in rotating heterogeneous cylinders under moving load and thermal conditions; implementing an efficient mesh free method (2018) Applied Mathematical Modelling, 61, pp. 377-407.

• Asgari M., Rashedi B., Pertinence of Sheep Knee Joint for Calibration of Ligaments’ Constitutive Equations; Experimental and Theoretical Study (2018) AUT Journal of Mechanical Engineering.

• Moradi B., Asgari M., Investigation of Brain Trauma in Vehicle Side Crash and Developing Computational Model for Diffuse Axonal and Subdural Hematoma Injuries (2018) AUT Journal of Mechanical Engineering.

• Mahbod, M., Asgari, M. Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes (2018) Mechanics of Advanced Composite Structures.

•  Teimouri M., Asgari M., Developing BESO Topology Optimization Algorithm of Continuum Structures for Stiffness and Fundamental Frequency Considering Geometrical Symmetry Constraint (2018) AUT Journal of Mechanical Engineering.

• Mahbod, M., Asgari, M.  Mechanical properties of functionally graded porous biomaterials for prosthesis replacement using analytical and numerical solution (2019) Moddares Journal of Mechanical Engineering.

• Azimi, M.B., Asgari, M., Salaripoor, H. A new homo-polygonal multi-cell structures under axial and oblique impacts; considering the effect of cell growth in crashworthiness (2019) International Journal of Crashworthiness, .

• Allahyari, E., Asgari, M., Pellicano, F. Nonlinear strain gradient analysis of nanoplates embedded in an elastic medium incorporating surface stress effects (2019) European Physical Journal Plus, 134 (5), art. no. 191, .

• Allahyari, E., Asgari, M. Thermo-mechanical vibration of double-layer graphene nanosheets in elastic medium considering surface effects; developing a nonlocal third order shear deformation theory (2019) European Journal of Mechanics, A/Solids, 75, pp. 307-321.

• Mahbod, M., Asgari, M. Elastic and plastic characterization of a new developed additively manufactured functionally graded porous lattice structure: Analytical and numerical models (2019) International Journal of Mechanical Sciences, 155, pp. 248-266.

• Ahmadi, A., Asgari, M. Efficient crushable corrugated conical tubes for energy absorption considering axial and oblique loading (2019) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (11), pp. 3917-3935.

•  Teimouri M., Asgari M., Multi- Objective BESO Topology Optimization for Stiffness and Frequency of Continuum Structures, (2019), Structural Engineering and Mechanics, Accepted.

•  Allahyari, E., Asgari, M. Effects of in-phase and anti-phase large amplitude nonlinear models for double-layer nanostructures (2019), SN Applied Sciences, Accepted.

Selected Conference Papers (In English)

• M.T. Ahmadian, E. Esmailzadeh, M. Asgari, 'Stress Distribution Analysis of a Non-uniform Cross-Section Beam under Moving Mass', The Biennial Canadian Society of Mechanical Engineering Forum Conference CSME2006, May 21-23, 2006, Calgary, Alberta, Canada.
• M.T. Ahmadian, E. Esmailzadeh, M. Asgari, 'Dynamic Analysis of Non-uniform Cross-Section Beam under Moving Mass Using Finite Element Method', 14th International Mechanical Engineering Conference ISME2006, May 16-18, 2006, Isfahan University of Technology, Isfahan, Iran.
• M. Asgari M. Akhlaghi, M. Sadighi, 'Two-Dimensional Wave Propagation in Functionally Graded Cylindrical Shell with Finite Length', 3rd Int. Conf. On Applied and Theoretical Mechanic (MECHANICS'07), Dec. 14-16, 2007, Tenerife, Spain.
• M. Asgari, M. Akhlaghi, M. Sadighi, Reduction of Transient Thermal Stresses in Finite Length Hollow Cylinder by Using Two-Dimensional Functionally Graded Materials, 4th International Conference on High Performance Structures and Materials(HPSM2008), 13 - 15 May, 2008, London, UK.
• M. Asgari, M. Akhlaghi, Two-Dimensional Functionally Graded Cylindrical Shell with Finite Length under Impact Loading, 10th International Conference on Structures Under Shock and Impact (SUSI2008), 14 - 16 May 2008, Algarve, Portugal.
• M. Asgari, M. Akhlaghi, S. M. Hoseini, Analysis of Transient Stress Wave in Two-Dimensional Functionally Graded Tick Hollow Cylinder with Finite Length, CSME-SCGM biannual conference, 2008, Ottawa, Canada.
• M. Asgari, M. Akhlaghi, M. Sadighi, 'Material Distribution Design of Functionally Graded Hollow Cylinder under Transient Thermal Loading for Heat Resisting', 16th Annual (International) Conference on Mechanical Engineering (ISME2008) May 14-16, 2008, Shahid Bahonar University of Kerman, Iran.
• M. Noorijani, M. Asgari, M. Akhlaghi, Volume Fraction Optimization of 2D FGM Thick Hollow Cylinder under Mechanical and Thermal Loading using Genetic Algorithm, 18th Annual (International) Conference on Mechanical Engineering (ISME2008) May 14-16, 2010, Sharif University of Technology, Tehran, Iran.
• M. Asgari, M. Akhlaghi, 'Analysis of 2D Functionally Graded Hollow Cylinder under Transient Thermal Loading for Heat Resisting, 19th International Workshop on Computational Mechanics (IWCMM'19), September 1-4 2009, Constanta, Romania.
• M. Asgari ,A. Bahri, H.R. Lari, Finite Element Based Fatigue Analysis of Bolted joints in Multi-Megawatt wind Turbines Main Frame, NAUN International Conferences of Recent Researches in Applied Mechanics, , March 7-9, 2012, Athens, Greece.
• M. Asgari, A. Bahri, H.R. Lari, Effective Finite Element Models for Fatigue Analysis of Bolted Connections in Megawatt Wind Turbine Structure, The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), March 6-7, 2012, Tehran, Iran.
  
• M. Asgari, A. Ghorbanpour, S. Mortazavi, Buckling of Double walled Carbon Nano Coned Embedded in Elastic Foundation, 21st Annual International Conference on Mechanical Engineering-ISME2013, 7-9 May, 2013, Tehran, Iran.

• D. Sharifikia,M. Asgari, Structural Simulation of Human Mitral Valve Behaviour Cosidering Effects of Material Nonlinearities, 21th Iranian Conference on Biomedical Engineering (ICBME 2014) Nov 26-28, 2014 Tehran, Iran.

• M. Asgari, A. Khanmohammadi and M. Parsa, Cyclic Behavior of Thick Walled FGM Cylinder Based on Nonlinear Kinematic Hardening Models, 4th International Conference on Composites Characterization, Fabrication and Application, December 16-17, 2014, Tehran, Iran.

• M. Taheri, M. Asgari, An Exact Solution for Creep Behaviour of Functionally Graded Thick Spherical Pressure Vessel, 22^nd Annual International Conference on Mechanical Engineering-ISME2014, 12-14 May, 2014, Ahwaz, Iran.

• D. Sharifikia, M. Asgari, Explicit Dynamic Analysis of Mitral Valve Closure using Hyperelastic Constitutive Modeling, 23 rd Annual International Conference on Mechanical Engineering-ISME2015, 12-14 May, 2015, Tehran, Iran.

• Danial Sharifikia, Masoud Asgari, Healthy and Edge-to-Edge Repaired Mitral Valve Dynamic Simulation, 2nd Conference on Novel Approaches of Biomedical Engineering in Cardiovascular Diseases, Tehran, Iran, 21-22 January, 2016.

• Sanaz S. Hashemi , Masoud Asgari, Akbar Rasoulian, A Mathematical Modeling for in Vitro Skeletal Muscle Behavior in Shear Deformation Mode, 23th Iranian Conference on Biomedical Engineering (ICBME 2016), 2016 Tehran, Iran.

• Behnam Moradi, Masoud Asgari, Analysis of Brain Trauma in Side CrashBased on FEM Model, 7thd Conference on Engineering and Natural Science, Prague, Chech Republic, 21-22 July, 2017.
  

• Hamidreza Salaripoor, Masoud Asgari^, Experimental and Numerical Study of Crushing Behavior of Multi-Walled Polygonal Cross section Tubes Using COPRAS Multi Criteria Decision Making Algorithm, 25^th Annual International Conference on Mechanical Engineering, ISME2017, 2-4 May 2017, Tarbiat Modares university, Tehran, Iran.

• Masoud Asgari, Ehsan Allahyar, Multiple-scale analysis of nonlinear free vibration of nanoplate including surface effects, 2nd World Congress & Expo on Materials Science and Nanoscience, September 25-27, 2017 in Valencia, Spain.
• Haji Akbari, H. , Asgari, M, Parametric study of single and multi-bolted joints in composite structures, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), 13-14 Feb., 2018, Tehran, Iran

books

Faculty of Mechanical Eng. of K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)
Tell: (+98 21) 8867 4841-8   Fax: (+98 21) 8867 7274
Website: www.kntu.ac.ir
Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )