books

Handbook of Epoxy/Fiber Composites, Three Chapters of the Book (Dynamic Mechanical Analysis of Epoxy/Natural Fiber Composites, Introduction to Epoxy/Natural Fiber Composites, and the Effect of Environmental Conditions on the Synthetic Fiber-Reinforced Epoxy Composites), Springer, 2022.
Epoxy Composites: Fabrication, Characterization and Applications, One Chapter of the Book (Chapter 12- Smart Epoxy Composites), Wiley, 2021.
Metal-Matrix Composites Innovations, Advances and Applications (Chapter 16: Influence of Graphene Nanoplatelet Reinforcements on Microstructural Development and Wear Behavior of an Aluminum Alloy Nanocomposite), Springer, 2018.
Damage & Fracture of Composite Materials and Structures, One Chapter of the Book (The Study of Response of High Performance Fiber-Reinforced Composites to Impact Loading), Springer, 2012.
Materials with Complex Behavior, One Chapter of the Book (Effects of Single-Walled Carbon Nanotubes on Fiber Diameter Distribution of Poly Butylene Terephthalate Electrospun Composite Nanofibers), Springer, 2012.
Laser Safety and Standards, South Tehran Branch, Islamic Azad University Press, Tehran, Iran, 2008.
Fundamentals, Principles and Applications of Low Level Laser, Iranian Medical Laser Association & Iran University, Tehran, Iran, 2005.
Translation of Book: Key to Aluminum Alloys, by John Data, Loyeh Press, Tehran, Iran, 2003.

Journal Papers

Electrochemical Performance of TiNb2O7/Graphene/CNTs Hybrid Nanocomposites as Anode Materials for Li-Ion Batteries, Diamond and Related Materials, Vol. 141, 2024, 110654.
Synthesis and Effect of Using Silica Fume Particles on Shear Properties of Basalt Fibers-Epoxy Composites, Polymer Composites, 7 Nov. 2023, https://doi.org/10.1002/pc.27877.
The Effect of Thermal and Cryogenic Environments on the Impact Performance of Aluminum-Glass Fibers/Epoxy Laminated Composites, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 237, No. 21, 2023, 5066–5078.
Molybdate-Doped Sulfonated-Polyaniline (Spni.Mo) Grafted CNT Nano-Particles for Fabrication of a Dual-Functional Epoxy Composite Coating with Durable Corrosion Resistance Function, Colloids and Surfaces A-Physicochemical and Engineering Aspects, Vol. 677, Part B, 2023, 132433.
Self-Healing Polymers Containing Nanomaterials for Biomedical Engineering Applications: A Review, Polymer Composites, Vol. 44, Issue 10, 2023, 6869-6889.
The Effect of Hybridizing Natural Fibers and Adding Montmorillonite Nanoparticles on the Impact and Bending Properties of Eco-Friendly Metal/Composite Laminates, Advanced Engineering Materials, 2023, Vol. 25, No. 12, 2023, 2201791.
Zinc-Doped Sulfonated Polyaniline Tailored Multi-Walled Carbon Nanotubes (Zn-SPANI-MWCNT); A Novel Nano-Hybrid for Designing A Smart Self-Healable Epoxy Coating, Journal of Industrial and Engineering Chemistry, Vol. 122, 2023, 397-414.
The Experimental Assessment of Carbon Nanotubes Incorporation on the Tensile and Impact Properties of Fiber Metal Laminate Fabricated by Jute/ Basalt Fabrics-Aluminum Layers: As Hybrid Structures, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 237, No. 8, 2023, 1877-1886.
Impact Properties of Carbon Fibers-Epoxy Composite/Aluminum Laminates: Effect of Cryogenic and Thermal Aging, Iranian Polymer Journal, Vol. 32, 2023, 187–201.
Assessment of Mechanical and Healing Behaviors of Glass Fibers-Epoxy Composite Containing the Microcapsules with the Nanocomposite Shell, Journal of Applied Polymer Science, Vol. 140, Issue 1, 2023, e53273, 1-9.
The Effect of Thermal Cycles on the Impact Performance of Carbon Fibers-Epoxy/Aluminum Fibers Metal Laminates, Journal of Advanced Materials and Technologies, Vol. 11, No. 3, 2022, 1-16.
The Simultaneous Effect of Microcapsules and Silica Nanoparticles on the Mechanical-healing Properties of Glass Fibers-Epoxy Smart Composites, Fibers and Polymers, Vol. 23, No. 10, 2022, 2907-2915.
Behaviour of Lightweight Smart Sandwich Panels Subjected to Tensile and Bending Loads- An Experimental Study, International Journal of Advanced Design and Manufacturing Technology, Vol. 15, No. 2, 2022, 1-13.
The Effect of Capsulated Nanosilica-Epoxy Healing Agents on the Self-Healing Ability of Glass Fibers-Epoxy Composites under Mechanical Loading, Journal of Industrial Textiles, Vol. 52, 2022, 1-19.
The Characterization of the Flexural and Shear Performances of Laminated Aluminum/ Jute-Basalt Fibers Epoxy Composites Containing Carbon Nanotubes: As Multi-Scale Hybrid Structures, Thin-Walled Structures, Vol. 179, 2022, 109690.
Synergetic Effects of Graphene Nanoplatelets/Montmorillonite on their Dispersion and Mechanical Properties of the Epoxy-Based Nanocomposite: Modeling and Experiments, Polymer Composites, Vol. 43, 2022, 6897-6911.
Experimental Analysis of Corrugated Core Sandwich Panel with Smart Composite Face-Sheets under High-Velocity Impact, Journal of Composite Materials, Vol. 56, No. 10, 2022, 1495-1511.
Study on High Velocity Impact Response of Aramid Fibers-Epoxy/Aluminum Laminate Composites Toughened by ZrO2 and SiO2 Nanoparticles, Journal of Industrial Textiles, Vol. 51, No. 5S, 2022, 8175S-8195S.
Experimental Assessment of Adding Carbon Nanotubes on the Impact Properties of Kevlar-Ultrahigh Molecular Weight Polyethylene Fibers Hybrid Composites, Journal of Industrial Textiles, Vol. 51, No. 3S, 2022, 3767S-3785S.
Effect of Stacking Sequence on the Mechanical Properties of Pseudo-Ductile Thin-Ply Unidirectional Carbon-Basalt Fibers/Epoxy Composites, Journal of Industrial Textiles, Vol. 51, No. 2S, 2022, 2835S-2852S.
Recent Trend in Developing Advanced Fiber Metal Laminates Reinforced with Nanoparticles: A Review Study, Journal of Industrial Textiles, Vol. 51, No. 5S, 2022, 7374S-7408S.
Effect of Graphene on the Interfacial and Mechanical Properties of Hybrid Glass/Kevlar Fiber Metal Laminates, Journal of Industrial Textiles, Vol. 51, No. 2S, 2022, 2576S-2593S.
A Comprehensive Review Study on Pure Titanium Niobium Oxide as the Anode Material for Li-Ion Batteries, Journal of Alloys and Compounds, Vol. 911, 2022, 165117.
Effects of Calcination Parameters on the Purity, Morphology, and Electrochemical Properties of the Synthesized TiNb2O7 by the Solvothermal Method as Anode Materials for Li-Ion Batteries, Journal of Electroanalytical Chemistry, Vol. 917, 2022, 116394.
Synthesis and Electrochemical Performance of TiNb2O7 Nanoparticles Grown on Electrochemically Prepared Graphene as Anode Materials for Li-Ion Batteries, Journal of Power Sources, Vol. 535, 2022, 231418.
Recent Trends in the Development of Mxenes and Mxene-Based Composites as Anode Materials for Li-Ion Batteries, Journal of Energy Storage, Vol. 47, 2022, 103572.
Electrochemical Performance of TiNb2O7 Nanoparticles Anchored with Different Contents of MWCNTs as Anode Materials for Li-Ion Batteries, Ceramics International, Vol. 48, Issue 10, 2022, 14717-14725.
The Experimental Assessment of the Various Surface Modifications on the Tensile and Fatigue Behaviors of Laminated Aluminum/ Aramid Fibers- Epoxy Composites, International Journal of Fatigue, Vol. 154, 2022, 106560.
Energy Absorption of the Kevlar®/PP Hybrid Composite: Fabric to Composite Optimization, Journal of the Textile Institute, Vol. 113, No. 6, 1018–1026, 2022.
The Temperature Effects on the Mechanical Properties of Pseudo-ductile Thin-ply Unidirectional Carbon-basalt Fibers/Epoxy Hybrid Composites with Different Stacking Sequences, Fibers and Polymers, Vol. 22, No. 11, 2021, 3162–3171.
Experimental Investigation of Flexural Properties of Glass Fiber–Epoxy Self-Healable Composite Structures Containing Capsulated Epoxy Healing Agent And NiCl2(Imidazole)4 Catalyst, Journal of Industrial Textiles, Vol. 51, No. 5, 2021, 788–805.
A Review Study on Titanium Niobium Oxide-Based Composite Anodes for Li-Ion Batteries: Synthesis, Structure, and Performance, Ceramic International, Vol. 47, No. 19, 2021, 26598–26619.
Study of Mechanical Properties of Basalt Fibers/Epoxy Composites Containing Silane-Modified Nanozirconia, Journal of Industrial Textiles, Vol. 51, No. 4, 2021, 649–663.
A Review Study on the Recent Advances in Developing the Heteroatom-Doped Graphene and Porous Graphene as Superior Anode Materials for Li-Ion Batteries, Ceramics International, Vol. 47, No. 16, 2021, 22269–22301.
Modeling and Experimental Study on the Mechanical Behavior of Glass/Basalt Fiber Metal Laminates after Thermal Cycling, International Journal of Damage Mechanics, Vol. 30, No. 8, 2021, 1192–1212.
Optimization of Mechanical and Thermal Properties of Elastomer Modified Carbon Fibers/Phenolic Resin Composites, Fibers and Polymers, Vol. 22, No. 7, 2021, 1986–1994.
Design and Characterization of A Multilayered Hybrid Cored-Sandwich Panel Stiffened by Thin-Walled Lattice Structure, Thin-Walled Structures, Vol. 161, 2021, 107514.
The Synergic Effect of Microcapsules and Titanium Nanoparticles on the
Self-Healing and Self-Lubricating Epoxy Coatings: A Dual Smart Application, Surfaces and Interfaces, Vol. 23, 2021, 100998.
Recent Advances in Developing the Mxene/Polymer Nanocomposites with Multiple Properties: A Review Study, Synthetic Metals, Vol. 273, 2021, 116695.
Experimental Investigation on Flexural Properties of Self-Healing Composites Reinforced by Shape Memory Strip, Mechanics of Advanced Materials and Structures, Vol. 28, No. 4, 2021, 384-390.
Tensile and Creep Behavior of Microvascular Based Self-Healing Composites: Experimental Study, Mechanics of Advanced Materials and Structures, Vol. 28, No. 7, 2021, 753-762.
An experimental Investigation on the Sulfur and Nitrogen Co-Doping and Oxidation of Prepared Graphene by Electrochemical Exfoliation of Pencil Graphite Rods, Ceramics International, Vol. 46, No. 18, 2020, 28860-28869.
The Effect of Graphene Nanoplatelets on the Flexural Properties of Fiber Metal Laminates Under Marine Environmental Conditions, International Journal of Adhesion and Adhesives, Vol. 103, 2020, 102709.
High-Velocity Impact Properties of Multi-Walled Carbon Nanotubes/E-Glass Fiber/Epoxy Anisogrid Composite Panels, Journal of Computational & Applied Research in Mechanical Engineering, Vol. 9, No. 2, 2020, 235-243.
Investigating the High Velocity Impact Behavior of the Laminated Composites of Aluminum/Jute Fibers-Epoxy Containing Nanoclay Particles, Fibers and Polymers, Vol. 21, No. 11, 2020, 2607-2613.
Experimental Investigation of the Healing Properties of the Microvascular Channels-Based Self-Healing Glass Fibers/Epoxy Composites Containing the Three-Part Healant, Polymer Testing, Vol. 91, 2020, 106862.
Recent Advances in One-Pot Functionalization of Graphene Using Electrochemical Exfoliation of Graphite: A Review Study, Synthetic Metals, Vol. 269, 2020, 116549.
The Synergistic Effect of Graphene Nanoplatelets–Montmorillonite Hybrid System on Tribological Behavior of Epoxy-Based Nanocomposites, Tribology International, Vol. 151, 2020, 106472.
An Experimental Investigation on the Synthesis of Fluorographene by Electrochemical Method in the Mixture of Sulfuric and Hydrofluoric Acid Electrolytes, Ceramics International, Vol. 46, No. 16, 2020, 25189-25199.
Improving the Flexural Properties of E-Glass Fibers/Epoxy Isogrid Stiffened Composites Through Addition of 3-Glycidoxypropyltrimethoxysilane Functionalized Nanoclay, Silicon, Vol. 12, 2020, 2515-2523.
Investigation of Longitudinal and Transverse Reinforcing Single Lap Joints of the Polymer Composites/Al Under Hygrothermal Condition, Fibers and Polymers, Vol. 21, No. 10, 2020, 2338-2343.
Flexural properties of sandwich composite panels with glass laminate aluminum reinforced epoxy facesheets strengthened by SMA wires, Polymer Testing 89, 2020, 106641.
The Flexural and Impact Behavior of The Laminated Aluminum-Epoxy/Basalt Fibers Composites Containing Nanoclay: An Experimental Investigation, Journal of Sandwich Structures and Materials, Vol. 22, No. 6, 2020, 1931-1951.
The Effect of Stacking Sequence of Basalt and Kevlar Fibers on the Charpy Impact Behavior of Hybrid Composites & Fiber Metal Laminates, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 234, No. 16, 2020, 3270-3279.
Comparative Experimental and Numerical Study on the Mechanical Properties, Formability, and Microstructure of Two High Strength Steel Sheets, The International Journal of Advanced Manufacturing Technology, Vol. 108, 2020, 2023-2033.
The Tensile Properties and Interlaminar Shear Strength of Microcapsules-Glass Fibers/Epoxy Self-Healable Composites, Engineering Fracture Mechanics, Vol. 230, 2020, 106937.
Effect of Interlayer Hybridization of Carbon, Kevlar, and Glass Fibers with Oxidized Polyacrylonitrile Fibers on the Mechanical Behaviors of Hybrid Composites, Proceedings of The Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 234, No. 9, 2020, 1823-1835.
Microcapsulated Epoxy Resin with Nanosilica‐Urea Formaldehyde Composite Shell, Journal of Applied Polymer Science, Vol. 137, No. 16, 2020, 48580.
The Effect of Multi-Walled Carbon Nanotubes on the Mechanical Behavior of Basalt Fibers Metal Laminates: An Experimental Study, International Journal of Adhesion and Adhesives, Vol. 98, 2020, 102538.
High Velocity Impact Response of Aluminum-Carbon Fibers-Epoxy Laminated Composites Toughened by Nano Silica and Zirconia, Fibers and Polymers, Vol. 21, No. 1, 2020, 170-178.
The Effect of Surface Modified Nanoclay on the Interfacial and Mechanical Properties of Basalt Fiber Metal Laminates, Thin-Walled Structures, Vol. 144, 2019, 106343.
Morphological/SAXS/WAXS Studies on the Electrochemical Synthesis of Graphene Nanoplatelets, Ceramics International, Vol. 45, No. 16, 2019, 20882-20890.
Improvement in the Mechanical and Tribological Behavior of Epoxy Matrix with the Inclusion of Synthesized Ti3AlC2 MAX Particles, Journal of Composite Materials, Vol. 53, No. 26-27, 2019, 3819-3827.
The Effects of Surface‐Modified Graphene Nanoplatelets on the Sliding Wear Properties of Basalt Fibers‐Reinforced Epoxy Composites, Journal of Applied Polymer Science, Vol. 136, No. 39, 2019, 47986.
An Experimental Study on Impact Resistance of Different Layup Configuration of Fiber Metal Laminates, Fibers and Polymers, Vol. 20, No. 10, 2019, 2200-2206.
The Effects of Pre-Heating and Sintering Temperature on the Sol-Gel Synthesis of Mullite Nanoparticles, Materials Research Express, Vol. 6, No. 10, 2019, 105045.
Effect of Shape Memory Alloy Wires on the Buckling Behavior of Fiber Metal Laminates, Fibers and Polymers, Vol. 20, No. 8, 2019, 1690-1695.
Effects of Applying a Combination of Surface Treatments on the Mechanical Behavior of Basalt Fiber Metal Laminates, International Journal of Adhesion and Adhesives, Vol. 92, 2019, 133-141.
Investigation of Tensile Characteristics of an Epoxy Matrix Composite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers, Mechanics of Advanced Composite Structures,‎ Vol. 6, No. 2, 2019, 181-190.
The Effect of Different Configurations on the Bending and Impact Properties of the Laminated Composites of Aluminum-Hybrid Basalt and Jute Fibers-Epoxy, Fibers and Polymers, Vol. 20, No. 5, 2019, 1054-1060.
Interlaminar Shear Strength and Tensile Properties of Environmentally-Friendly Fiber Metal Laminates Reinforced by Hybrid Basalt and Jute Fibers, Polymer Testing, Vol. 75, 2019, 205-212.
Experimental Investigation on the Smart Self‐Healing Composites Based on the Short Hollow Glass Fibers and Shape Memory Alloy Strips, Polymer Composites, Vol. 40, No. 5, 2019, 1883-1889.
Blending Quality of Co-Air-Textured Yarn: Optimization Parameters of Kevlar/Polypropylene Applicable for Thermoplastic Composites, Journal of Composite Materials, Vol. 53, No. 13, 2019, 1791-1802.
Optimal Design of A Bio-Inspired Self-Healing Metal Matrix Composite Reinforced with NiTi Shape Memory Alloy Strips, Journal of Intelligent Material Systems and Structures, Vol. 29, No. 20, 2018, 3972–3982.
Evaluation of Repeated High Velocity Impact on Polymer-Based Composites Reinforced with Basalt and Kevlar Fibers, Materials Today Communications, Vol. 17, 2018, 76-81.
Effect of Pre-Tension on Tensile Strength of Glass Fibers-Epoxy Composite Reinforced with Shape Memory Alloy Wire, Polymer Composites, Vol. 39, Issue S4, 2018, E2454-E2459.
High Velocity Impact Response of Basalt Fibers/Epoxy Composites Containing Graphene Nanoplatelets, Fibers and Polymers, Vol. 19, No. 11, 2018, 2388-2393.
The Study of the Correlation between Ascending and Descending Rates of the Imposed Specific Stress and Transposition of Chemical Reactions during PAN Precursor Fibers Stabilization, Polymer Degradation and Stability, Vol. 156, 2018, 234-244.
Effects of Various Aluminum Surface Treatments on the Basalt Fiber Metal Laminates Interlaminar Adhesion, International Journal of Adhesion and Adhesives, Vol. 84, 2018, 184-193.
Investigation of the Self-Healing Behavior of Sn-Bi Metal Matrix Composite Reinforced with NiTi Shape Memory Alloy Strips Under Flexural Loading, The Journal of The Minerals, Metals & Materials Society (JOM), Vol. 70, Issue 6, 2018, 806–810.
Reinforcing Effect of Surface‐Modified Multiwalled Carbon Nanotubes on Flexural Response of E‐Glass/Epoxy Isogrid‐Stiffened Composite Panels, Polymer Composites, Vol. 39, Issue S2, 2018, E677-E686.
Evaluating the Mechanical Behavior of Basalt Fibers/Epoxy Composites Containing Surface-modified CaCO3 Nanoparticles, Fibers and Polymers, Vol. 19, No. 3, 2018, 635-640.
Effect of Shape Memory Alloy Wires on High-Velocity Impact Response of Basalt Fiber Metal Laminates, Journal of Reinforced Plastics and Composites, Vol. 37, No. 5, 2018, 300-309.
The Effects of Stacking Sequence and Thermal Cycling on the Flexural Properties of Laminate Composites of Aluminium-Epoxy/Basalt-Glass Fibres, Materials Research Express, Vol. 5, No. 2, 2018, 025302.
Investigation on the Flexural Response of Multiscale Anisogrid Composite Panels Reinforced with Carbon Fibers and Multi-Walled Carbon Nanotubes, Journal of Composite Materials, Vol. 52, No. 2, 2018, 225-233.
Effect of Thermal Cycling on Tensile Properties of Degraded FML to Metal Hybrid Joints Exposed to Sea Water, International Journal of Adhesion and Adhesives, Vol. 79, 2017, 95-101.
Synthesis and Characterization of Graphene Nanoplatelets Reinforced AA7068 Matrix Nanocomposites Produced by Liquid Metallurgy Route, Materials Science and Engineering-A, Vol. 706, 2017, 71-82.
Corrosion Failure Analysis of Printed Circuit Boards Exposed To H2S-Containing Humid Environments, Engineering Failure Analysis, Vol. 79, 2017, 538–546.
Synergistic Galvanic-Pitting Corrosion of Copper Electrical Pads Treated with Electroless Nickel-Phosphorus/Immersion Gold Surface Finish, Engineering Failure Analysis, Vol. 77, 2017, 138-145.
Optimization of Sic Particle Distribution during Compocasting of A356-Sicp Composites Using D-Optimal Experiment Design, Journal of Particle Science & Technology Vol. 3, No. 3, 2017, 145-154.
Thermal and Mechanical Properties of Hybrid Carbon/Oxidized Polyacrylonitrile Fibers- Epoxy Composites, Polymer Composites, Vol. 38, No. 7, 2017, 1412-1417.
Improvement of High-Velocity Impact Properties of Anisogrid Stiffened Composites by Multi-Walled Carbon Nanotubes, Fibers and Polymers, Vol. 18, No. 5, 2017, 965-970.
The Evaluation of the Thermal and Mechanical Properties of Aramid/Semi-Carbon Fibers Hybrid Composites, Fibers and Polymers, Vol. 18, No. 2, 2017, 296-302.
On the Flexural Properties of Multiscale Nanosilica/E-Glass/Epoxy Anisogrid-Stiffened Composite Panels, Journal of Computational and Applied Research in Mechanical Engineering, Vol. 7, No. 1, 2017, 99-108.
Effect of Thermal Cycling on the Tensile Behavior of Polymer Composites Reinforced by Basalt and Carbon Fibers, Mechanics of Composite Materials, Vol. 52, N0 . 6, 2017, 807-816.
Charpy Impact Behavior of Clay/Basalt Fiber-Reinforced Polypropylene Nanocomposites at Various Temperatures, Journal of Thermoplastic Composite Materials, Vol. 29, No. 10, 2016, 1416-1428.
Enhanced Mechanical Properties of Unidirectional Basalt Fiber/Epoxy Composites Using Silane-Modified Na+-Montmorillonite Nanoclay, Polymer Testing, Vol. 55, 2016, 135-142.
Creep Behavior of Basalt Fiber-Metal Laminate Composites, Composites Part B: Engineering, Vol. 91, 2016, 275-282.
Effect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-Brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel, International Journal of Engineering-Transactions B: Applications, Vol. 29, No. 5, 2016, 669-676.
Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites, Mechanics of Advanced Composite Structures, Vol. ‎ 3, No. 1, 2016, 1-7.
On the Mechanical Characterizations of Unidirectional Basalt Fiber/Epoxy Laminated Composites with 3-Glycidoxypropyltrimethoxysilane Functionalized Multi-Walled Carbon Nanotubes–Enhanced Matrix, Journal of Reinforced Plastics and Composites, Vol. 35, No. 5, 2016, 421-434.
Effects of A Modified SIMA Process on the Structure, Hardness and Mechanical Properties of Al-12Zn-3Mg-2.5 Cu Alloy, Iranian Journal of Materials Science and Engineering, Vol. 12, No. 4, 2015, 77-88.
The Effect of Hybridization on Thermal and Mechanical Properties of Glass/Oxidized PAN Fibers-Polymers Composites, Fibers and Polymers, Vol. 16, No. 11, 2015, 2445-2450.
The Effect of Thermal Treatment on Tensile Properties of Basalt Fibers, Journal of Ceramic Science & Technology, Vol. 06, No. 03, 2015, 245-248.
Prediction of High Performance Fibers Strength Using Back Propagation Neural Network, Journal of Macromolecular Science- Part A, Vol. 52, No. 6, 2015, 642-647.
Effect of Post Spinning Modification using Potassium Permanganate on the Thermal Specifications of Acrylic Fibers, Polymers & Polymer Composites, Vol. 23, No. 3, 2015, 137-140.
Modeling and Optimization of Carbon Fiber Processing: A RSM-FCCC Experimental Design Approach, Journal of Macromolecular Science- Part A, Vol. 52, No. 1, 2015, 69-75.
Effect of Fiber Treatment on the Mechanical Properties of Date Palm Fiber Reinforced PP/EPDM Composites, Advanced Composite Materials, Vol. 24, No. 1, 2015, 27-40.
Hybridization Effect of Basalt and Carbon Fibers on Impact and Flexural Properties of Phenolic Composites, Iranian Polymer Journal, Vol. 23, 2014, 767-773.
Phosphate-Free Protective Nano-Ceramic Coatings for Galvanized Steel Sheet with H2O2 Additive, Advanced Materials Research, Vol. 829, 2014, 436-440.
Charpy Impact Response of Basalt Fiber Reinforced Epoxy and Basalt Fiber Metal Laminate Composites: Experimental Study, International Journal of Damage Mechanics, Vol. 23, No. 6, 2014, 729-744.
Modeling and Differential Evolution Optimization of PAN Carbon Fiber Production Process, Fibers & Polymers, Vol. 15, No. 6, 2014, 1182-1189.
Modeling and Optimization of Cooling Slope Process Parameters for Semi-solid Casting of Al-A356 Alloy, Transactions of Nonferrous Metals Society of China, Vol. 24, 2014, 961-968.
On the Tribological Behavior on Nanoalumina Reinforced Low Alloy Sintered Steel, Materials & Design, Vol. 57, 2014, 60-66.
Influence of Thermal Conditions on the Tensile Properties of Basalt Fiber Reinforced Polypropylene-Clay Nanocomposites, Materials & Design, Vol. 53, 2014, 540-549.
Synthesis and Characterization of In-Situ Al-Al13Fe4-Al2O3-TiB2 Nanocomposite Powder by Mechanical Alloying and Subsequent Heat Treatment, Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry, Vol. 44, 2014, 177-184.
Synthesis and Characteristics of Continuous Basalt Fiber Reinforced Aluminum Matrix Composites, Journal of Composite Materials, Vol. 47, No. 27, 2013, 3379-3388.
The Study of Processing Parameters on Impact Behavior of High Performance Polyethylene Fiber Cross-ply Composites by Taguchi Method, Fibers and Polymers, 14, 11, 2013, 1864-1869.
Mechanical Characterization of Clay Reinforced Polypropylene Nanocomposites at High Temperature, Fibers & Polymers, Vol. 14, No. 10, 2013, 1650-1656.
Effect of Thermal Cycling on Hardness and Impact Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers, Journal of Thermal Stresses, Vol. 36, Issue 7, 2013, 684–698.
Evaluation and Modification of Inclusions' Characteristics in HK40 Heat-Resistant Cast Steel, International Journal of Minerals, Metallurgy, and Materials, Vol. 20, No. 4, 2013, 354-359.
The Effect of Multi-Walled Carbon Nanotubes on Morphology, Crystallinity and Mechanical Properties of PBT/MWCNT Composite Nanofibers, Journal of Polymer Research, Vol. 20, No. 65, 2013, 1-6.
Artificial Neural Network Prediction of Cu-Al2O3 Composite Properties Prepared by Powder Metallurgy Method, Journal of Materials Research and Technology, Vol. 2, No. 4, 2013, 351-355.
Influence of Pin Profile on Quality of Friction Stir Lap Welds in Carbon Fiber Reinforced Polypropylene Composite, International Journal of Mechanics and Applications, Vol. 2-3, 2012, 1-5.
Preparation of Al-Fe/TiB2 Nanocomposite Powder by Ball Milling and Subsequent Heat Treatment, Micro & Nano Letters, Vol. 7, No. 5, 2012, 448-452.
Mechanical Properties of Nanoclay Reinforced Polypropylene Composites at Cryogenic Temperature, Journal of Reinforced Plastics and Composites, Vol. 31, No. 14, 2012, 967-976.
FT-IR Studies on the Cyclization Reaction of Acrylic Fibers, Polymers & Polymer Composites, Vol. 20, No. 5, 2012, 487-492.
Mechanical Characterization of Nanoclay Reinforced Polypropylene Composites at High Temperature Subjected to Tensile Loads, Advanced Materials Research, Vol. 488-489, 2012, 567-571.
Tensile Properties of Clay/Polypropylene Nanocomposites at Cryogenic Temperature, Advanced Materials Research, Vol. 488-489, 2012, 562-566.
Numerical Study on Impact Response of Aircraft Sandwich Wing Made of Fiber-Metal Laminate Face-Sheets Subjected to Bird strike, Advanced Materials Research, Vol. 488-489, 2012, 8-13.
Effect of Single-Walled Carbon Nanotubes on Fiber Diameter Distribution of Poly (Butylene Terephthalate) Electrospun Composite Nanofibers, Advanced Structured Materials, Vol. 16, 2012, 455-461.
Production and Optimization of Aluminum-Basalt Composites by Hand
Lay-Out Technique, Lecture Notes in Engineering and Computer Science, Vol. 3, 2012, 1826-1829.
High Performance Fibers Production Process Using Taguchi Experimental Design, Fibers and Polymers, Vol. 12, No. 8, 2011, 1054-1061.
Analysis of the Effect of Piezoelectric Patches on the Behavior of Adhesively Bonded Scarf Joints- An Analytical Study, Journal of Adhesion Science and Technology, Vol. 25, No. 18, 2011, 2539-2553.
An Experimental Study on the Behavior of PP/EPDM/Jute Composites in Impact, Tensile and Bending Loadings, Journal of Reinforced Plastics and Composites, Vol. 30, No. 16, 2011, 1341-1347.
Poly(Butylene Terephthalate)/ Single Wall Carbon Nanotubes Composite Nanofibers by Electrospinning, Journal of Macromolecular Science- Part B, Vol. 50, No. 6, 2011, 1031-1041.
Mechanical Behavior of Basalt Fiber-Reinforced and Basalt Fiber Metal
Laminate Composites Under Tensile and Bending Loads, Journal of Reinforced Plastics and Composites, Vol. 30, No. 8, 2011, 647-659.
Carbon Fiber-Reinforced Composites in Automotive Engine, Defect and Diffusion Forum, Vol. 312-315, 2011, 341-345.
The Effect of the Pyrolysis Furnace Type on the Yield of Silicon Carbide Whiskers Produced from Rice Husks, Defect and Diffusion Forum, Vol. 312-315, 2011, 346-351.
Manufacture and Characterization of Poly (butylene Terephthalate) Nanofibers by Electrospinning, J. of Macromolecular Science, Part B: Physics, Vol. 49, Issue 4, 2010, 833–842.
Effect of Piezoelectric Patches on the Behavior of Adhesively Bonded Single Lap Joints, The Journal of Adhesion, Vol. 86, Issue 5, 2010, 601–629.
The Effect of Post Hot Compaction on Crystallinity and Thermal Behavior of Ultra-High Molecular Weight Polyethylene Fiber Laminates, J. of Macromolecular Science, Part B: Physics, Vol. 48, Issue 4, 2009, 766–773.
Statistical Process Optimization through Multi-Response Surface, World Academy of Science, Engineering and Technology, Vol. 39, 2009, 280–284.
FT-IR Study of Stabilized PAN Fibers for Fabrication of Carbon Fibers, World Academy of Science, Engineering and Technology, Vol. 38, 2009, 434-437.
The Effect of commercial Polyacrylonitrile Fibers Characterizations on the Produced Carbon Fibers Properties, Journal of Materials Processing Technology, Vol. 198, Issues 1-3, 2008, 60-67.
Optimization of Carbon Fibers Made-up Commercial Polyacrylonitrile Fibers Using Screening Design Method, Materials Science-Poland, Vol. 25, No. 1, 2007, 113-120.
Conversion of Modified Commercial Polyacrylonitrile Fibers to Carbon Fibers, Journal of Optoelectronics and Advanced Materials, Vol. 9, No. 6, 2007, 1614-1617.
Effect of Thermal Characteristics of Commercial and Special Polyacrylonitrile Fibres on the Fabrication of Carbon Fibers, Materials Science and Technology, Vol. 22, No. 10, 2006, 1235-1239.
Stabilization of Commercial Polyacrylonitrile Fibers for Fabrication of Low Cost Medium Strength Carbon Fibers, E-Polymers, No. 001, Jan. 2006, 1-10.
Carbon Fiber Production Based on Commercial Polyacrylonitrile Fibers of Wet Formation, Fibre Chemistry, Vol. 38, No. 5, 2006, 383-386.
Improving Carbon Fibers Quality Characteristic by Using Statistical Modeling, International Journal of Applied Mathematics & Statistics, Vol. 2, No. M04, 2004, 60-71.

Conferences Proceedings

Investigating the Intrinsic Self-Healing Behavior in Thermoplastic Polyurethane Polymer, The Annual Conference on Smart Materials and Structures (ACSMS2023), Qom, Iran, 16 Feb. 2023.
The assessment of Self-Healing Intrinsic Behavior into the Epoxy/Glass Fibers Composite by Thermoplastic Healing Agent, The Annual Conference on Smart Materials and Structures (ACSMS2023), Qom, Iran, 16 Feb. 2023.
Microcapsule Containing Linseed Oil for Applying in Self-Healing Smart Coatings, The Annual Conference on Smart Materials and Structures (ACSMS2023), Qom, Iran, 16 Feb. 2023.
The Effect of the Shape and Grain Size of the Silver Nanoparticles on the Electrical Properties of Polyolefin Conductive Ink, 11th International Conference on Materials & Metallurgical Engineering (iMat2022), Tehran, Iran, 13-14 Dec. 2022.
Investigating Impact Behavior and Adhesion of Silver Metal Coating on Polymer Composites, 11th International Conference on Materials & Metallurgical Engineering (iMat2022), Tehran, Iran, 13-14 Dec. 2022.
Recent Development of Graphene-Based Cathode Materials for Dye Sensitized Solar Cell, The Annual Conference on Smart Materials and Structures, Qom, Iran, 2 Feb. 2022.
Investigation of SLA Process Parameters on Surface and Biological Properties of Titanium Implants, 1st International Conference & 4th National Conference on Materials, Metallurgy, Mining, Ahvaz, Iran, 24 Feb. 2021.
Experimental and Numerical Analysis on Compression Behavior of Smart Composite Sandwich Panel with Corrugated Core, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), Tehran, Iran, 18-19 Feb. 2020.
Experimental Analysis on Tensile Properties of Smart Sandwich Panels with FML Face Sheets Reinforced by SMA Wires, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), Tehran, Iran, 18-19 Feb. 2020.
Experimental and Numerical Analysis on Compression Properties of Corrugated Core Composite Sandwich Panel, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), Tehran, Iran, 18-19 Feb. 2020.
Investigating the Bending Behavior of Self-Healable Epoxy-Glass Fibers Composites, 24ème Congrès Français de Mécanique (CFM 2019), Brest, France, 26-30 Aug. 2019.
Fatigue properties determination of carbon fiber reinforced epoxy composite by self-heating measurements, 24ème Congrès Français de Mécanique (CFM 2019), Brest, France, 26-30 Aug. 2019.
Fabricating of Self-Healing Properties of Epoxy Matrix, Rotomolding, Thermoforming and Blow-Molding (RTS 2019), Paris, France, 10-12 Jul. 2019.
Investigation of Tensile Behavior of Self-Healing Epoxy-Glass Fibers/ Polyvinyl Chloride Sandwich Structures Containing Encapsulated Repair Agent, 27th Annual International Conference of Iranian Society Mechanical Engineering, Tehran, Iran, 30 Apr.-2 May 2019.
Investigation of Carbon Fibers-Epoxy Composite Self-Healing Behavior/ Encapsulated Repair Agent Under Transverse Loading, 27th Annual International Conference of Iranian Society Mechanical Engineering, Tehran, Iran, 30 Apr.-2 May 2019.
Investigation of Glass Fibers-Epoxy Composite Self-Healing Behavior/ Encapsulated Repair Agent Under Tensile Loading, 27th Annual International Conference of Iranian Society Mechanical Engineering, Tehran, Iran, 30 Apr.-2 May 2019.
Numerical Analysis on Flexural Properties of Sandwich Panels with FML Face Sheets Reinforced by SMA Wires, The 6th International Conference on Composites: Characterization, Fabrication and Application (CCFA-6), Tehran, Iran, 11-12 Dec. 2018.
Experimental Investigation on Flexural Properties of Sandwich Panels with FML Face Sheets Reinforced-by SMA wires, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, 13-14 Feb. 2018.
A Survey of Linear Guideway Vibrational Behavior, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, 13-14 Feb. 2018.
Investigation Compression Properties of healed Sandwich Structure via Epoxy and TETA Microcapsules, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, 13-14 Feb. 2018.
Low Velocity Impact Properties of Basalt/Jute Fibers Hybrid Composites, The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran, Iran, 13-14 Feb. 2018.
Tensile Behavior of Epoxy/ Basalt Fibers Composites Reinforced with Calcium Carbonate Nanoparticles, Sixth National Conference on Nanotechnology from Theory to Application, Tehran, Iran, 8 Feb. 2018
An Experimental Study on Flexural Properties of the Basalt Fiber Metal Laminates Effect of Surface Treatment and Carbon Nanotubes, 12th International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT), Kosice, Slovakia, 6-9 Aug. 2017. The 16th International Conference of Iranian Aerospace Society
Three-Point Flexural Response of Isogrid-Stiffened Composites Containing Nanoclay, The 16th International Conference of Iranian Aerospace Society, Tehran, Iran, 21-23 Feb. 2017.
Mechanical Response of CNTs-Enhanced Anisogrid Composite Panels to High-Velocity Impact, The 16th International Conference of Iranian Aerospace Society, Tehran, Iran, 21-23 Feb. 2017.
Experimental Study of Flexural Behavior of Self-Healing Fiber-Metal Laminate Composites with Short Glass Hollow Fibers, The 16th International Conference of Iranian Aerospace Society, Tehran, Iran, 21-23 Feb. 2017.
High-Velocity Impact Response of Isogrid Stiffened Composite Panels, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
Flexural Properties of Basalt Fiber/Epoxy Composites with Nano-ZrO2 Enhanced Matrix, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
Microvascular-Based Self-Healing E-Glass Fiber/Epoxy Composites under Tensile Testing Condition, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
Evaluating the Effect of Multi-Walled Carbon Nanotubes on the Mechanical Performance of Anisogrid Composite Panels under Transverse Loading, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
On the Flexural Strength of Self-Healing E-Glass/Epoxy Composites Containing Micro-Vascular Channels, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
Effects of Functionalized Graphene Nanoplatelets on the Flexural Properties of Basalt Fiber/Epoxy Nanocomposite System, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
Experimental Investigation on the Energy Absorption of Self-Healing Composites Subjected to Impact Loading, The 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 20-21 Dec. 2016.
Effects of Strain-Induced Melt Activation Process on the Structure and Morphology Mg2Si in Al-15 Mg2Si Composite, 18th International Conference on Materials Science Engineering and Manufacturing (ICMSEM 2016), Paris, France, 25-26 Jul. 2016.
On the Compressive Performance of Basalt Fiber/Epoxy/MWCNTs Composites, 18th International Conference on Materials Science Engineering and Manufacturing (ICMSEM 2016), 18th International Conference on Materials Science Engineering and Manufacturing (ICMSEM 2016), Paris, France, 25-26 Jul. 2016.
Using Basalt Fibers in Fabricating Thin Isogrid-Stiffened Composite Structures and Determining Their Flexural Response, The Biennial International Conference on Experimental Solid Mechanics, Tehran, Iran, 16-17 Feb. 2016.
Self-Healing Capability in Foam Based Sandwich Panels using Hollow Glass Fibers, The Biennial International Conference on Experimental Solid Mechanics, Tehran, Iran, 16-17 Feb. 2016.
On the Flexural Behavior of Multiscale Nano-Silica/E-glass/Epoxy Anisogrid-Stiffened Composite Structures, The Biennial International Conference on Experimental Solid Mechanics, Tehran, Iran, 16-17 Feb. 2016.
Experimental investigation on flexural properties of self-healing composites fabricated by short hollow fibers, The Biennial International Conference on Experimental Solid Mechanics, Tehran, Iran, 16-17 Feb. 2016.
Thermal cycling and environmental effect on tensile behavior of adhesive single lap joints for fiber metal laminate, The Biennial International Conference on Experimental Solid Mechanics, Tehran, Iran, 16-17 Feb. 2016.
Modification of Fracture and Fatigue Behavior of Fiber Metal Laminates by Nanofillers, 2nd International Congress on Technology- Engineering and Science, Kuala Lumpur, Malaysia, 28-29 July 2016.
Fatigue Phenomenon in Polymer Base Composite Materials, the Second Annual National Conference on Mechanical Engineering and Industrial Solutions (2nd NCMEIS), Mashhad, Iran, 8 July 2016.
On the High-Velocity Impact Behavior of Anisogrid-Stiffened Composite Plates Containing Multiwalled Carbon Nanotubes, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, 14 Apr. 2016.
On the Mechanical Performance of Multiscale Grid-Stiffened Composite Subjected to Transverse Quasi-Static Loading, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, 14 Apr. 2016.
The Effect of Adding Multi-Walled Carbon Nanotubes on the Tensile Behavior of Fiber-Metal Composite Structures, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, 14 Apr. 2016.
Smart Fiber Metal Laminate Reinforcement Using Shape Memory Wire Under High-Speed Impact Loading, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, 14 Apr. 2016.
Experimental Study of Smart Fiber Metal Laminates Amplification Using 4 Shape Memory Wires Under High Speed Impact Load, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, 14 Apr. 2016.
Production of Composite Body of Power Transmission Systems in the Aerospace Industry by In-Situ Compositing of Magnesium Alloy Containing Zirconium and Rare Earth Elements of Yttrium and Neodymium, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, 14 Apr. 2016.
Fabrication and Determination of Fracture Toughness in Self-Healing Polymer Composite with Hollow Fibers, 3rd National and 1st International Conference on Applied Researches in Electrical Mechanical and Mechantronics Engineering, Tehran, Iran , 17-18 Feb. 2016.
Fuzzy Modeling the Influence of Fiber Volume Fraction and Strain Rate on Tensile Properties of Carbon/Epoxy Composites, The 23rd Annual International Conference on Mechanical Engineering (ISME2015), Tehran, Iran, 12-14 May 2015.
Reinforcing of E-glass/Epoxy Grid-Stiffened Composite Panels with Nano-SiO2, Particles: Investigation of Flexural Properties, 14th International Conference of Iranian Aerospace Society, Tehran, Iran, 10-12 Mar. 2015.
Experimental Investigation of Flexural Properties of E-glass Fiber/Epoxy Grid Composite Structures Filled with Self-Healing Materials, 14th International Conference of Iranian Aerospace Society, Tehran, Iran, 10-12 Mar. 2015.
Reinforcing Effect of Carbon Nanotubes on Flexural Behavior of Carbon Fiber/Epoxy Grid composite Structures-Experimental Investigation, 14th International Conference of Iranian Aerospace Society, Tehran, Iran, 10-12 Mar. 2015.
Microstructural Characteristics and Mechanical Properties of A356-SiCp Composites Fabricated by Mechanical Stirring Process; Effect of Stirring Temperature, The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran, Iran, 16-17 Dec. 2014.
Impact Behavior of Kevlar/Carbon Hybrid Fiber-Metal Laminates, The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran, Iran, 16-17 Dec. 2014.
Mechanical Properties of Hybrid Nano Composite of Polycarbonate Reinforced by SiO2/Al2O3, The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran, Iran, 16-17 Dec. 2014.
Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Hybrid Single Lap Joints for Fiber Metal Laminate, The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran, Iran, 16-17 Dec. 2014.
Magnetic Investigation of CoFe2O4 Nanopowder Fabricated by Sol-Gel Auto Combustion Method, The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014), Kish, Iran, 24-27 Feb. 2014.
An Experimental Study on the Impact Resistance of Carbon-Kevlar-Fibers-Reinforced Aluminum and Carbon-Glass-Fibers-Reinforced Aluminum Laminates, The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Tehran, Iran, 18-19 Feb. 2014.
The Effect of Hybridization on Impact Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, 18-19 Dec. 2012.
Finite Element Analysis of Tensile Behaviour of Aluminum Structures Adhesively Bonded Single and Double-Strap Repairs, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, 18-19 Dec. 2012.
Effect of Temperature and Fiber Volume Fraction on the Hardness Properties of Basalt Fibers-Phenolic Reinforced Composites, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, 18-19 Dec. 2012.
Effect of Strain Rate on Flexural Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers, The International Conference on Experimental Solid Mechanic and Dynamics (X-Mech 2012), Tehran, Iran, 6-7 Mar. 2012.
Comparison of Compressive Properties between Vacuum Infusion and Hand Lay-Up Method toward Sandwich Composites Reinforced by E-Glass and Kevlar Fibers, The International Conference on Experimental Solid Mechanic and Dynamics (X-Mech 2012), Tehran, Iran, 6-7 Mar. 2012.
Effect of Strain Rate on Tensile Properties of Carbon Fibers by Resin Impregnated Tow, The International Conference on Experimental Solid Mechanic and Dynamics (X-Mech 2012), Tehran, Iran, 6-7 Mar. 2012.
Evaluation of the Effect of Inclusions on Tensile Properties of 25Cr20Ni Heat Resistant Stainless Steel, 8th International Conference on Clean Steel, Budapest, Hungary, 14-16 May 2012.
Impact Properties of Clay Reinforced Polypropylene Nanocomposites at Different Temperatures, First International Conference on Nanostructures and Nanomaterial Science and Applications (ICNNSA 2012) Masjed-Soleiman, Iran, 7 Feb. 2012,
Experimental Investigation of Pin Geometry Influence on Tensile Strength of Friction Stir Welds in Polypropylene Composites, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 Dec. 2011.
Taguchi Optimization of Process ParametersiIn Friction Stir Lap Welding of Polypropylene Composite, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran, Iran, 27-29 Dec. 2011.
Thermal Shock Cycling Effect on Flexural Properties of Phenolic Based Composites Reinforced By Basalt and Carbon Fibers, Polymer Processing Society Asia/Australia Regional Meeting (PPS-2011), Kish, Iran, 15-17 Nov. 2011.
Aging Influence on Charpy Impact Behavior of Basalt Fibers Reinforced Epoxy Composites, Polymer Processing Society Asia/Australia Regional Meeting (PPS-2011), Kish, Iran, 15-17 Nov. 2011.
Synthesis of Al-Fe/TiB2 Nanocomposite Powder by Mechanical Alloying and Annealing, 3rd International Conference on Ultrafine Grained & Nanostructured Materials (UFGNSM 2011), Tehran, Iran, 2-3 Nov. 2011.
Effect of Pin Geometry on Surface Appearance and Tensile Shear Strength of Friction Stir Polypropylene Composite Welds, International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011), Antalya, Turkey, 24-25 Oct. 2011.
Study of the Response of High Performance Polyethylene Fiber Crossply Composites to Impact Loading, 4th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2010), Paris, France, 8-9 July 2010.
Effect of Pizoelectric Patches on Behavior of Adhesively Bonded Scraft Joints, 4th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2010), Paris, France, 8-9 July 2010.
Carbon Fibers- Reinforced Composites in Automotive Engine, 6th International Conference on Diffusion in Solids and Liquids (DSL-2010), Paris, France, 5-7 July 2010.
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites, The 2nd International Conference on Composites (CCFA-2), Kish, Iran, 27-30 Dec. 2010.
Fatigue Behavior of Notched Aluminum Plates Repaired by Smart and Composite Patches, ASME 2010, 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010), Istanbul, Turkey, 12-14 July 2010.
Fracture and Mechanical Behavior of Nanoclay Reinforced Epoxy Adhesive in Bonded Joints, International Conference on Chemical Engineering and Applications, Singapore (CCEA 2010), 26-28 Feb. 2010.
Creep Analysis of Reinforced Adhesives in Adhesively Single Lap Joints, International Conference on Chemical Engineering and Applications, Singapore (CCEA 2010), 26-28 Feb. 2010.
FT-IR Study of Stabilized PAN Fibers for Fabrication of Carbon Fibers, World Congress on Science, Engineering and Technology, Penang, Malaysia, 25-27 Feb. 2009.
Fourier Transform Infrared Study on Types of Acrylic Fibers for Production of Carbon Fibers, Second International Conference and Exhibition on Composites Materials and Nano-Structures, Melaka, Malaysia, 5-7 Aug. 2008.
Investigation in High Impact Resistant of High Performance Polyethylene (HPPE) Fiber Laminate Composite, Knowledge Transfer in New Technology, Vancouver, BC, Canada, 8-11 July 2008.
The Influence of High Temperature Exposure on the Tensile Properties of Basalt Fibers, International Conference on Mechanical and Manufacturing Engineering, Johor Bahru, Malaysia, 21-23 May 2008.
Conversion of Modified Commercial Polyacrylonitrile Fibers to Carbon Fibers, Fourth International Conference on Mechanical Engineering, Bangkok, Thailand, 14-16 Dec. 2007.
Economic Carbon Fibers Process Planning: Statistical Modeling Approach, The Fifth International Conference on Quality and Reliability, Chiang Mai, Thailand, 5-7 Nov. 2007.
Fabrication of Carbon Fibers from Polyacrylonitrile Fibers- Properties & Applications, 6th Iranian Ceramic Congress, Tehran, Iran, 15-16 May 2007.
Study of Mechanical and Physical Properties of Carbon Fibers Manufactured from Commercial Wet Spin Polyacrylonitrile Fibers, 2nd International Conference on Recent Advances in Composite Materials, New Delhi, India, 20-23 Feb. 2007.
The Effect of Processing Parameters on the Properties of Carbon Fibers Fabricated from Commercial Dry Spin Acrylonitrile Fiber Precursor, 9th Japan International SAMPE Symposium, Japan, Tokyo, 29 Nov.- 2 Dec. 2005.
Fabrication of Carbon Fibers from Commercial Polyacrylonitrile Fibers with Modified Chemical compositions, 9th Annual Congress of Iranian Metallurgy Engineers, Shiraz, Iran, 15-16 Nov. 2005.
Feasibility Study for Producing of Carbon, Basalt & Glass Fiber in Iran, 3rd International Conference on Materials for Advanced Processing Technologies, Singapore, 3-8 Jul. 2005.
An Introduction to the Ups and Downs of History of Modern Science in Iran, Seminar on the Movement of Production of Science, Software and Free Thinking Movement, Islamic Azad University, Karaj Branch, Iran, 6 Jan. 2005.
Modern Technology of Using Carbon Fibers in Oil Industries of World and Iran, 2nd National Conference on Technology Development in the Oil Industry-Challenges & Approaches, Tehran, Iran, 27-28 Dec. 2004.
Extraction and Recovery of Noble Metals with Carbon Fibers, The 1st Mineral Processing Conference of Iran, Tehran, Iran, 21-23 Nov. 2004.
Carbon Fibers-Polymer Composites in Human Body, E-MRS 2004 Fall Meeting, Poland, Warsaw, 6-10 Sept. 2004.
The Effect of Additives on the Yield of Silicon Carbide Whiskers Produced from Rice Husks, 3th International Conference on Advanced Manufacturing Technology, ICAMT 2004, Malaysia, Kuala Lumpur, 11-13 May 2004.
Production of Silicon Carbide Particulates and Whiskers from Rice Husks, The 1st Seminar on the Application of Silicon Carbon in Industry, Faculty of Engineering, University of Tehran, Tehran, Iran, 28 May 1997.
The Effect of Type of Atmosphere and Temperature of Cooking and Pyrolysis on the Yield of Silicon Carbide Produced from Rice Husks, The 1st Seminar on the Application of Silicon Carbide in Industry, Faculty of Engineering, University of Tehran, Tehran, Iran, 28 May 1997.
The Effect of Different Parameters on the Yield of Silicon Carbide Obtained from the Pyrolysis of Rice Husks, The 2nd Iranian Conference on Ceramic Engineering, Iranian Ceramic Engineering, Tehran, Iran, 24-26 Oct. 1995.
Principles of Materials Selection for Aerospace Industries, The First Conference on Space Technology and Developing Countries, Iranian Scientific Organization for Science and Technology, Tehran, Iran, 23-27 May 1995.
The Effect of Chemical Treatments on the Structure of Rice Husks and Quantity of SiC Produced from its Pyrolysis, The 1st National Congress of Chemical Engineering of Iran, Tarbiat Modarres University, Tehran, Iran, 15-17 Nov. 1994.
The Effect of Surface Treatments on Production of SiCw Rice Husks, 5th World Seminar on Heat Treatment & Surface Engineering, IFHT 95, Isfahan, Iran, 26-29 Sept. 1995.
Candidate Materials for Aerospace Industries, The First Conference on Space Technology and Developing Countries, Iranian Scientific Organization for Science and Technology, Tehran, Iran, 23-27 May 1995.

Scientific and Research Reports

Feasibility Study for Producing of Glass Fibers in Iran Ordered by Pars Kani Company under the License of Iran Industries Expansion and Renovation Organization.
Feasibility Study for Producing of Basalt Fibers in Iran Ordered by Bank Sanat and Madan.
Feasibility Study for Producing of Magnetic Ceramics (Soft and Hard Ferrite) Ordered by Azar Refractory Co.
Feasibility Study for Producing of Anti-Acid Bricks Ordered by Azar Refractory Co.
Feasibility Study for Producing of Servomotor in Iran Ordered by Pars Kani Company under the License of Iran Industries Expansion and Renovation Organization.

Faculty of Materials Science and Engineering of K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)

Tell: (+98 21) 8867 4841-8 Fax: (+98 21) 8867 7274

Website: www.kntu.ac.ir

Email: materials@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

Reza Eslami Farsani

books

Journal Papers

Conferences Proceedings

Scientific and Research Reports