Journal Papers

“Analysis of impact of a moving body on an orthotropic elastic plate”, Journal of AIAA, V. 32, No. 4, 1994
“Analysis of the dynamic response of large orthotropic elastic plates to transverse impact”, Journal of Aerospace Society of India, May 1995
“Characterization of GLALL composites - an experimental study”, Iranian Journal of Polymer Science & Technology, 14, No. 5, 2001, (Persian)
“Study the static and dynamic stresses on composite bicycle frames, Iranian Journal of Polymer Science & Technology, 15, No. 3, 2002, (Persian)
“Transverse impact analysis of a moving body on orthotropic plate and study the influence of the effective parameters”, Journal of Amir Kabir, Amir Kabir University of Technology, 13, No. 50, 2002 (Persian)
“Introducing a new mathematical model and developing a computer package for 3D machining of fibre reinforced polymer composites”, Journal of ESTEGHLAL, Isfahan University of Technology, 21, No. 2, 2003 (Persian)
“A new approach to static and dynamic analysis of composite plates with different boundary conditions”, Journal of Composite Structures, 69, 2005, 149-155
“Local and global damped vibrations of plates with a visco-elastic soft flexible core: an improved high- order approach”, Journal of Sandwich Structures, 7, No. 5, 2005, 431-456
“Transient dynamic response of composite circular cylindrical shells under radial impulse load and axial compressive loads”, Journal of Thin Wall Structures, 43, 2005, 1763-1786
“A study of the mechanical properties of steel/ aluminium/ GRP laminates”, Journal of Materials Science and Engineering A, 412, 2005, 137-140
“Dynamic Kabir, Amir Kabir University of Technology, Iran, 16, No. 62-D, 2005, 37-43 (Persian)
“Response of in-plane linearly pre-stressed composite sandwich panels with transversely flexible core to low velocity impact”, Journal of Sandwich Structures, 8, No. 2, 2006, 157-181
“Analytical prediction of low velocity impact response of composite sandwich panels using new TDOF springs-masses-damper model”, Journal of Composite Materials, 40, No. 18, 2006, 1671-1689
“Dynamic response of in-plane pre-stressed sandwich panels with a visco-elastic flexible core and different boundary conditions”, Journal of Composite Material, 40, No. 16, 2006, 1449-1468
“High order dynamic response of composite sandwich panels with flexible core under simultaneous low velocity impacts of multiple small mass”, Journal of Solids and Structures, 43, 2006, 6667-6687
“Low-speed impact response of biaxial pre-stressed composite sandwich panels using new analytical procedure”, Journal of Amir kabir, Amir Kabir University of Technology, Iran, 16, No. 63-B, 2006, 49-58
“Experimental and semi-theoretical analysis of plastic response of isotropic square plates under blast loading”, Journal of Energetic Materials, 1, No. 2, 2006, 43-50 (Persian)
“Explosive powder metallurgy, a new method for powder forming”, Journal of Research and Development in Energetic Materials, 2, 2, 2006 (Persian)
“Analysis of fibre reinforced composite plates subjected to transverse impact in the presence of initial stresses”, Journal of Composite Structures, 77, 2007, 263-268
“Response of composite sandwich panels with stiff/ flexible core to low velocity transverse impact: a new dynamic model”, Journal of Impact Engineering, 34, 2007, 522-543
“Effect of physical and geometrical parameters on transverse low velocity impact response of sandwich panels with a transversely flexible core”, Journal of Composite Structures, 77, 2007, 430-443
“Dynamic response of smart hybrid composite plates subjected to low velocity impact”, Journal of Composite Materials, 41, 19, 2007, 2347-2370
“Theoretical analysis of explosive compaction of tungsten powder”, Mechanical and Aerospace Engineering Journal, 3, 1, 2007, 23-32 (Persian)
“The role of some effective parameters on the impact response of the smart hybrid composite plates”, Journal of Faculty of Engineering, University of Tehran, 41, 4, 2007, 459-472 (Persian)
“Effect of smart stiffening procedure on low velocity impact response of smart structures”, Journal of Materials Processing Technology, 190, 2007, 142-152
“Low-velocity impact response of active thin-walled hybrid composite structures embedded with SMA wires”, Journal of Thin-Walled Structures, 45, 2007, 799-808
“Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads”, International Journal of Adhesion & Adhesives, 28, 2008, 436-444
“Numerical study of lap joints with composite adhesives and composite adherends subjected to in-plane and transverse loads”, International Journal of Adhesion & Adhesives, 28, 2008, 411-418
“Dynamic response of functionally graded circular cylindrical shells”, Advanced Materials Research, Vol. 47-50, 2008, 608-611
“Impact behavior of cracked plate repaired with composite and FML patches”, Advanced Materials Research, Vol. 47-50, 2008, 612-616
“Effect of initial stresses on the response of FRP plates under low velocity transverse impact”, Journal of Ship Technology, 4, 2, 2008, 1-9
“Analysis and optimization of smart hybrid composite plates subjected to low-velocity impact using the response surface methodology (RSM)”, Journal of Thin-Walled Structures, 46, 2008, 1204-1212
“An experimental study on the Charpy impact response of cracked aluminum plates repaired with GFRP or CFRP composite patches”, Journal of Composite Structures, 89, 2009, 270-274
“Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads”, Journal of Thin-Walled Structures, 47, 8-9, 2009, 970-983
“Transient dynamic response of initially stressed composite circular cylindrical shells under radial impulse load”, Journal of Composite Structures, 89, 2009, 275-284
“Creep analysis of fibre reinforced adhesive in single lap joint – experimental study”, J. Adhesion & Adhesive, 29, 6, 2009, 656-661
“Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core”, Journal of Composite Structures, 91, 2009, 229-235
“Free vibration analysis of sandwich beam with FG core using the element free Galerkin method”, Journal of Composite Structures, 90, 2009, 373-379
“Transient dynamic analysis of tapered FRP composite transmission poles using finite element method”, Journal of Composite Structures, 92:2, 2010, 275-283
“Free vibration analysis of sandwich beams using improved dynamic stiffness method”, Journal of Composite Structures, Journal of Composite Structures, 92:2, 2010, 387-394
"Dynamic response of pre-stressed fibre metal laminate (FML) circular cylindrical shells subjected to lateral pressure pulse loads", Journal of Composite Structures, (Article in press)
"Free vibration response of composite sandwich cylindrical shell with flexible core", Journal of Composite Structures, (Article in press)
"Vibration of non-ideal simply supported laminated plate on an elastic foundation subjected to in-plane stresses", Journal of Composite Structures, (Article in press)
"Analytical Solution for Free Vibration of Sandwich Structures with a Functionally Graded Syntactic Foam Core", Materials Science Forum, 636-637, 2010, 1143-1149
“Dynamic response of pre-stress fibre composite subjected to transverse impact”, Journal of Amir Kabir, Amir Kabir University of Technology, 16, No. 62-D, 2005, 37-43 (Persian)
"Buckling analysis of FG plate with smart sensor/actuator, Journal of Solid Mechanics, 1, No. 3, 2009, 201-212
"Experimental study on effective parameter for thermal cutting of glass sheets, Journal of Mechanical Research and Applications, 1, No. 1, 2009, 45-51
"Analytical solution for two-dimensional magneto-Thermo-Mechanical Response in FG Hollow Sphere", Journal of Solid Mechanics, 1, No. 3, 2009, 201-212
" The effect of some physical and geometrical parameters on improvement of the impact response of smart composite structures", International Journal of Mathematical Models and Methods in Applied Sciences, 3, No. 3, 2009, 266-274
" Analysis on centrifugal load effect in FG hollow sphere subjected to magnetic field", Journal of Solid Mechanics, 1, No. 4, 2009, 300-312
"Free vibration analysis of sandwich beam carrying sprung masses", International Journal of Mechanical Sciences, 52, 2010, 1620-1633
"Transient Dynamic Response of Clamped-Free Hybrid Composite Circular Cylindrical Shells", Journal of Applied Composite Materials, 17, No. 2, 2010, 243-257
"Free vibrations of thick rectangular composite plate with uniformly distributed attached mass including stiffness effect", Journal of Composite Materials, 44, No. 24, 2010, 2897-2918
"Mechanical behavior of notched plate repaired with polymer composite and smart patches- Experimental study", Journal of Reinforced Plastics and Composites, 29, No. 19, 2010, 3021-3037
"Effect of patching on Charpy impact response of repaired notched plate- Experimental Study", Journal of Adhesion, 86, 2010, 561-585
"A mixed Ritz-DQ method for forced vibration of functionally graded beams carrying moving loads", Journal of Composite Structures, 92, 2010, 2497-2511
"Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials", Journal of Adhesion Science and Technology, 24, 2010, 1917-1928
"Analytical solution for two-dimensional magneto-thermoelastic response in FG hollow sphere with heat source", Turkish Journal of Environment Science and Engineering, 34, No. 4, 2010- 231-252
"Effect of piezoelectric patches on the behavior of adhesively bonded single lap joints", Journal of Adhesion, 86, 2010-601-629
"Geometrical effects of the distributed attached mass on the natural frequency of thick cylindrical and spherical shell using higher order theory", Turkish Journal of Environment Science and Engineering, 34, No. 4, 2010- 189-199
"Fracture analysis of semielliptical cracks at the interface of two functionally gradient materials using three dimensional finite element method", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225, No. 2, 2011, 103-110
"Static analysis of tapered FRP transmission poles using finite element method", Journal of Finite Elements in Analysis and Design, 47, 2011, 247-255
"Finite element modeling of low velocity impact on laminated composite plates and cylindrical shells", Journal of Composite Structures, 93, 2011, 1363-1375
"Mechanical behavior of basalt fiber reinforced and basalt-fiber metal laminate composites under tensile and bending loads", Journal of Reinforced Plastics and Composites, 30, No. 8, 2011, 647-659
"Numerical analysis of adhesively bonded T-joints with structural sandwiches and study of design parameters", International Journal of Adhesion & Adhesives, 31, 2011, 347–356
"Modelling of Low Velocity Impact of Laminated Composite Substructures", International Journal of Vehicle Structures & Systems, 3, No. 2, 2011, 96-106
"Analysis of the effect of piezoelectric patches on the behavior of adhesively bonded scarf joints-An analytical study", Journal of Adhesion Science and technology, 25, 2011, 2539-2553
"Multi-scale modeling of nonlinear tensile behavior in single-walled carbon nanotube reinforced nanocomposites", International Journal of Modeling and Optimization, 1, No. 3, 2011, 199-204
"Investigation of relations between atomic number and composition weight ratio in PZT and SMA and prediction of mechanical behavior", ACTA PHYSICA POLONICA A, 120, No. 3, 2011, 424-428
"Free vibrations of laminated composite shells with uniformly distributed attached mass using higher order shell theory including stiffness effect", Journal of Sound and Vibration, 330, 2011, 6355–6371
"Effect of geometrical and mechanical properties on behavior of sandwich beams with functionally graded face sheets under indentation loading", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225, No. 4, 2011, 231-244
"Indentation analysis of in-plane prestressed composite sandwich plates: An improved contact law", Key Engineering Materials, 471-472, 2011, 1159-1164
"An experimental study on the behavior of PP/EPDM/JUTE composites in impact, tensile and bending loadings", Journal of Reinforced Plastics and Composites, 30, No. 16, 2011, 1341-1347
"Experimental, theoretical and numerical studies on the response of square plates subjected to blast loading", Journal of Strain Analysis for Engineering Design, 46, 2011, 805-816
" Creep behavior of basalt and glass fiber reinforced epoxy composites", Journal of Mechanical Research and Application, 3, No. 1, 2011, 29-36
"High-order free vibration analysis of sandwich beams with a flexible core using dynamic stiffness method", Journal of Composite structures, 94, No. 5, 2012, 1503-1514
"Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory", European Journal of Mechanics A/Solids, 31, 2011, 54-66
" Forced vibration of a sandwich panel with composite layers and a FGM core", J. Mechanics Aerospace, 6 (3), 2011, 83-95 (Persian)
"Study the effect of projectile nose shape and incident angle on high velocity response of 4 layered carbon/glass composites", J. High Energetic Materials, 6 (2), 2012, 69-81 (Persian)
"A high-order theory for the analysis of circular cylindrical composite sandwich shells with transversely compliant core subjected to external loads", Journal of Composite structures, 94, No. 7, 2012, 2129-2142
"Buckling analysis of soft-core composite sandwich plates using 3D finite element method", Applied Mechanics and Materials, 105-107, 2012, 1768-1772
"Bending analysis of composite sandwich plates with flexible core using 3D finite element method", Applied Mechanics and Materials, 110-116, 2012, 1229-1236
"Numerical analysis on impact behavior of composite sandwich plates as energy harvesting structures", Applied Mechanics and Materials, 110-116, 2012, 1296-1304
"The effect of nanotube specifications on multi-scale modeling of nanocomposites", Applied Mechanics and Materials, 110-116, 2012, 1237-1244
"Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher-order theory", International Journal of Mechanical Sciences, 56, No. 1, 2012, 1-25
"Effect of chiral angle on tensile behavior modeling of single-walled carbon nanotubes", Journal of Mechanics of Advanced Materials and Structures, DOI:10.1080/15376494.2012.699591
"Behavior and failure modes of sandwich T-joint using cohesive zone material model and contact elements", Applied Composite Materials, DOI 10.1007/s10443-012-9248-9, 20 (1), 2013, 41-54
"Mechanical characterization of nanoclay reinforced polypropylene composites at high temperature subjected to tensile loads", Advanced Materials Research, 488-489, 2012, 567-571
"Modeling and simulation of controlled manipulation by AFM nano-robot", Applied Mechanics and Materials, 110-116, 2012, 3688-3695
"Tensile properties of clay/polypropylene nano composites at cryogenic temperature", Advanced Materials Research, 488-489, 2012, 562-566
"Numerical study on impact response of aircraft sandwich wing made of fiber metal laminate facesheets subjected to bird strike", Advanced Materials Research, 488-489, 2012, 8-13
"Free vibration analysis of tapered FRP transmission poles with flexible joint by finite element method", Structural Engineering and Mechanics, 42, No.3, 2012, 409-424
"Analytical solution for bending analysis of soft-core composite sandwich plates using improved high-order theory", Structural Engineering and Mechanics, 44, No. 1, 2012, 15-34
"Effect of distributed attached mass on the vibration of sandwich panel using higher order ESL theory", Advanced Materials Research, 488, 2012, 35-39
"Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory", Composite Structures, 96, 2013, 243-255
"Free vibration analysis of sandwich plates with functionally graded facesheets and temperature-dependent material properties: A new approach", European Journal of Mechanics - A/Solids, 35, 2012, 61-74
"Low velocity transverse impact response of functionally graded plates with temperature dependent properties", Composite Structures, 96, 2013, 64-74
"Static indentation response of an in-plane prestressed composite sandwich plate subjected to a rigid blunted indenter", European Journal of Mechanics - A/Solids, 38, 2013, 59-69
"Dynamic response of functionally graded circular cylindrical shells subjected to radial impulse load", International Journal of Mechanics and Materials in Design, 9(1), 2013, 65-81
"Mixed LW/ESL models for the analysis of sandwich plates with composite faces", Composite Structures, 98, 2013, 330-339
"Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads", composite structures, 98, 2013, 253-260
"Experimental investigation on distance effects in repeated low velocity impact on fiber-metal laminates", composite structures, 99, 2013, 31–40
"Buckling of non-ideal simply supported laminated plate on Pasternak foundation", Applied Mathematics and Computation, 219, 2013, 6420-6430
"Assessment of different higher-order theories for low-velocity impact analysis of fibre-metal laminate cylindrical shells", Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, DOI: 10.1177/1464420713477348, 2013
"Modeling and transient dynamic analysis of pseudoelastic SMA hybrid composite beam", Applied Mathematics and Computation, Accepted for publication
"Dynamic response of composite sandwich beams with arbitrary FG cores subjected to low velocity impact", Journal of Mechanics of Advanced Materials and Structures, Accepted for publication
"Buckling analysis of composite sandwich plates with flexible core using improved high-order theory", Journal of Mechanics of Advanced Materials and Structures, Accepted for publication
"High-order modeling of circular cylindrical composite sandwich shells with a transversely compliant core subjected to low velocity impact", Journal of Mechanics of Advanced Materials and Structures, Accepted for publication
"Mechanical Characterization of Clay Reinforced Polypropylene Nanocomposites at High Temperature", Fibers and Polymers, Accepted for publication
"Low velocity transverse impact response of a composite sandwich plate subjected to a rigid blunted cylindrical impactor", Archive of Applied Mechanics, under review process
"Charpy impact response of basalt fiber reinforced epoxy and basalt fiber metal laminate composites - Experimental study", Journal of Aerospace science and Technology, under review process
"Creep analysis in smart single-strap adhesive joints reinforced by shape memory alloys - Experimental study", IJAA, under review process
"Charpy impact behavior of clay/basalt fiber reinforced polypropylene nanocomposites at various temperature", Advanced composite materials, under review process
"An Indentation law for doubly curved composite sandwich panels with rigid-plastic core subjected to flat-ended cylindrical indenters", Composite Structures, Accepted for publication
"Low-velocity impact response of doubly curved composite shell with embedded SMA wires, Composite Structures, Accepted for publication
"Numerical study of adhesive single-lap joints for composite adherends subjected to combined tension-torsion loads", Adhesion, under review process
"Effect of joint geometry on behavior and failure modes of the sandwich T-joint under transverse static and dynamic loads", Adhesion, under review process
"Biaxial wrinkling analysis of composite-faced sandwich plates with soft core using improved high-order theory", European Journal of Mechanics - A/Solids, under review process
"Static tensile and transient dynamic response of cracked aluminum plate repaired with composite patch - Numerical study", Applied Composite Materials, under review process
"Temperature-dependent low velocity impact response of sandwich plates with functionally graded facesheets, Composite Structures, under review process
"A boundary element formulation for the heterogeneous functionally graded viscoelastic structures", Applied Mathematics and Computation, under review process
"Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene-clay nanocomposites", Materials and Design, under review process
" Effect of Thermal Cycling on Hardness and Impact Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers", Thermal Stresses, 36, 2013, 684-698

K.N. Toosi University of Technology
Pardis St. , Molla-Sadra Avenue, Vanak. Sq. , Tehran, Iran
Tell: (+98 21) 8867 4841-8 Fax: (+98 21) 8867 7274
P.O Box: 19395-1999 Postal Code: 19991 43344

Website: www.kntu.ac.ir

Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

S. Mohammad Reza Khalili

Journal Papers

books

Reviewed Conference Papers