books

Mechanics of Materials, Vol. 1, K.N. Toosi. University Press- 4th Ed., Tehran, Iran , (Persian (2018), (Persian)
Engineering Mechanics: Statics, K.N. Toosi University Press, Tehran, Iran (2014), (Persian)
Mechanics of Materials, Vol. 2, K.N. Toosi University Press, 2^nd Edition, Tehran, Iran (2012), (Persian)
"Indentation of Sandwich Beams with Functionally Graded Skins and Transversely Flexible Core", Book Chapter in "Damage and Fracture of Composite Materials and Structures", Ed. M.N. Tamin, Springer publication, 2012, 61-83
"Free Vibration Analysis of Sandwich Plates with Temperature-Dependent Properties of the Core Materials and Functionally Graded Face Sheets", Book Chapter in Mechanics and Properties of Composed Materials and Structures, Springer Berlin Heidelberg, 2012, 183-197
"Wrinkling Analysis of Rectangular Soft-Core Composite Sandwich Plates", Book Chapter in Mechanics and Properties of Composed Materials and Structures, Springer Berlin Heidelberg, 2012, 35-59
Mechanics of Materials, Vol. 1, K.N. Toosi. University Press- 3^nd Ed., Tehran, Iran (2011), (Persian)
Mechanics of Materials, Vol. 1, K.N. Toosi. University Press- 2^nd Ed., Tehran, Iran (2008), (Persian)
Mechanics of Materials, Vol. 2, K.N. Toosi University Press, Tehran, Iran (2007), (Persian)
Mechanics of Materials, Vol. 1, K.N. Toosi University Press, 1^st Ed., Tehran, Iran (2005), (Persian)
Engineering Mechanics: Statics, K.N. Toosi University Press, Tehran, Iran (2002), (Persian)
“Plasticity and Impact Mechanics”, (Ed. N.K. Gupta), Wiley Eastern Ltd, New Delhi, India (1993)
“Dynamic Response and Progressive Failure of Special Structures”, (Ed. R. Malla), American Society of Civil Engineers, New York, USA, (1993)

Journal Papers

“Lightweight Biodegradable Hybrid Composite Sandwich Panel under Three-point Bending loads-Experimental and Numerical", Composite Structures, Under review
“Experimental Analysis of Corrugated Core Sandwich Panel with Smart Composite Facesheets under High Velocity Impact", Journal of Composite Materials, Accepted for publication
“The effect of shape memory wire on the ballistic behavior of smart corrugated core sandwich panels", Journal of Science and Technology of Composites, 8 (2), 2021, 1612-1627 (Persian)
“Experimental and numerical analysis of a biodegradable hybrid composite under tensile and three-point bending tests", Composite Structures, 273, https://doi.org/10.1016/j.compstruct.2021.114255, 2021 (Q1)
“Optimization of Mechanical and Thermal Properties of Elastomer Modified Carbon Fibers/ Phenolic Resin Composites", Fibers and Polymers, 22 (7), 1986-1994, 2021 (Q2)
“Experimental investigation on flexural properties of self-healing composites reinforced by shape memory strip", Mechanics of Advanced Materials and Structures, 28 (7), 2021 (Q1) DOI: 10.1080/15376494.2019.1601311
“Tensile and creep behavior of microvascular based self-healing composites: Experimental study", Mechanics of Advanced Materials and Structures, 28 (4), 2021 (Q1) DOI: 10.1080/15376494.2019.1567882
“Evaluation of Fatigue Life for Dental Implants Using FEM Analysis", Prosthesis, 3, 300-314, 2021
“Investigation of Longitudinal and Transverse Reinforcing Single Lap Joints of the Polymer Composites/Al under Hygrothermal Condition", Fibers and Polymers, 21, 2338–2343, (2020) (Q2)
“Recent trend in developing advanced fiber metal laminates reinforced with nanoparticles: A review study", Journal of Industrial Textile, https://doi.org/10.1177/1528083720947106, 2020 (Q2)
“Flexural properties of polymer matrix sandwich composite panels with FML face sheets reinforced by SMA wires", Polymer Testing, 89, 2020 (Q1) https://doi.org/10.1016/j.polymertesting.2020. 106641
“Numerical and experimental analysis of Cu-Fe FG beam subjected to tensile loading", Proceedings of the Institution of Mechanical Engineering, Part C, https://doi.org/10.1177/0954406220917696, 2020 (Q2)
“Experimental investigation of ballistic behavior of sandwich panel with corrugated core", Journal of Mechanical Research and Application, 10 (1), 89-100, 2020
“The Buckling Analysis of Conical Sandwich Shells with Temperature Dependent Properties and an Improved High-Order Theory”, AUT Journal of Mechanical Engineering, 3, (1), 95-106, 2019
“Experimental investigation on the smart self‐healing composites based on the short hollow glass fibers and shape memory alloy strips”, Polymer Composites, 40, (5), 1883-1889, 2019 (Q2)
“Vibration and buckling analysis of laminated sandwich conical shells using higher order shear deformation theory and differential quadrature method”, Journal of Sandwich Structures & Materials, 21, (4), 1445-1480, 2019 (Q1)
“Low-velocity impact response of sandwich conical shell with agglomerated single-walled carbon nanotubes-reinforced face sheets considering structural damping”, Journal of Sandwich Structures & Materials, 21, (4), 1481-1519, 2019 (Q1)
“An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method”, Journal of science and Technology of Composites (JSTC), 6 (100472), 1-7, 2019 (In Persian)
“An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment”, Journal of science and Technology of Composites (JSTC), 5, (400551), 551-564, 2019 (In Persian)

“Experimental investigation on the smart self‐healing composites based on the short hollow glass fibers and shape memory alloy strips”, Polymer Composites, 2018 (Q1)
“Dynamic response of laminated composite beam reinforced with shape memory alloy wires subjected to low velocity impact of multiple masses”, Journal of Composite Materials, 52 (8), 2018, 1089-1101 (Q2)
“Experimental investigations on the mechanical properties and buckling behavior of the filament wound composite shells embedded with shape memory alloy wires”, Mechanics of Advanced Materials and Structures, 0, 0, 2018, 1-7. (Q2)
“Low velocity impact response and dynamic stresses of thick high order laminated composite truncated sandwich conical shell based on a new TDOF spring-mass-damper model considering structural damping”, Steel and Composite Structures 26(6), 2018, 771-791. (Q2)
“Optimal design of a bio-inspired self-healing metal matrix composite reinforced with NiTi shape memory alloy strips”, Journal of Intelligent Material Systems and Structures, DOI: 1045389X18803448, 2018. (Q1)
“Investigation of the Self-Healing Behavior of Sn-Bi Metal Matrix Composite Reinforced with NiTi Shape Memory Alloy Strips Under Flexural Loading”, Journal Of Materials, 70, 6, 2018, 806–810.
“Effect of pre-tension on tensile strength of glass fibers-epoxy composite reinforced with shape memory alloy wire”, Journal of polymer composites, Published online, 2018, https://doi.org/10.1002/pc.24751 (Q1)
“An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment”, Journal of Science and Technology of Composites, Published online, 2018 (In Persian)
“Numerical and experimental analysis of geometrical effect on modal response of cylindrical composite lattice structure”, Aerospace Knowledge and Technology Journal, 6, 2, 2017, 143-151 (In Persian)
“Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Adhesive Single Lap Joints for Fiber Metal Laminate”, Mechanics of Composite and Multi-Functional Materials, 7, 2017, 123-129.
“Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire”, Mechanics of Advanced Composite Structures, 4, 3, 2017, 225-232.
“Optimizing the self- healing behavior of hollow glass fibers reinforced epoxy matrix composite”, Journal of Modarres, 17, 8, 2017, 182-190.
“Experimental investigation on the debonding strength in shape memory alloy wire reinforced polymers”, Mechanics of Advanced Materials and Structures, 24, 6, 2017, 490-495. (Q2)
“Determination of the elastic properties of randomly oriented shape memory alloy (SMA) discontinuous wires reinforced epoxy resin”, Composite Structures, 180, 2017, 148-160. (Q1)
“Effect of thermal cycling on tensile properties of degraded FML to metal hybrid joints exposed to sea water”, International Journal of Adhesion and Adhesives, 79, 2017, 95-101. (Q1)
“Vibration and buckling analysis of laminated sandwich conical shells using higher order shear deformation theory and differential quadrature method”, Journal of Sandwich Structures and Materials, 0, 2017, 1-36. (Q1)
“Dynamic response of laminated composite beam reinforced with shape memory alloy wires subjected to low velocity impact of multiple masses”, Journal of Composite Materials, 0, 2017, DOI: 10.1177/0021998317722042 (Q2)
“Effect of thermal cycling on the tensile behavior of polymer composites reinforced by basalt and carbon fiber”, Mechanics of Composite Materials, 52, 6, 2017, 807-816. (Q2)
“Low velocity impact response of laminated composite truncated sandwich conical shells with various boundary conditions using complete model and GDQ method”, Journal of Applied and Computational Mechanics, 3, 1, 2017, 1-15. (Q4)
“Free Vibration of a Thick Sandwich Plate Using Higher Order Shear Deformation Theory and DQM for Different Boundary Conditions”, Journal of Applied and Computational Mechanics, 3, 1, 2017, 16-24 (Q4)
“General equations for free vibrations of thick doubly curved sandwich panels with compressible and incompressible core using higher order shear deformation theory”, Steel and Composite Structures, 24, 2, 2017, 151-176. (Q2)
“Low-velocity impact response of sandwich conical shell with agglomerated single-walled carbon nanotubes-reinforced face sheets considering structural damping”, Journal of Sandwich Structures and Materials, 0, 2017, 1-39. (Q1)
"Experimental investigation on the debonding strength in shape memory alloy wire reinforced polymers", Mechanics of Advanced Materials and Structures, 24, 6, 2016, 490-495 (Q2)
“ Non-linear transient dynamic analysis of sandwich plate with composite face-sheets embedded with shape memory alloy wires and flexible core-based on the mixed LW (layer-wise)/ESL (equivalent single layer) models, Composites Part B: Engineering, 87, 2016, 59-74 (Q1)
“Low velocity impact analysis of sandwich plates with functionally graded face sheets”, Mechanics of Advanced Materials and Structures, 23, No. 4, 2016, 363-374 (Q2)
“Creep behavior of basalt fiber-metal laminate composites”, Composites Part B: Engineering, 91, 2016, 275-282 (Q1)
“Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global- local theory”, Journal of Solid and Fluid Mechanics, 6, 2, 2016, 121-137
“The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis”, Mechanics of Advanced Composite Structures,‎ 3 (2), 2016, 83-87.
“Experimental and numerical study of the buckling of semi-cylindrical composite lattice”, Journal of Science and Technology of Composites (JSTC), 3 (3), 2016, 269-276.
“Analysis of dynamic stress intensity factor of finite piezoelectric composite plate under a dynamic load”, FME Transactions, 44 (4), 2016, 348-352. (Q3)
“Transient response analysis of tapered FRP poles with flexible joints by an efficient one-dimensional FE model”, Structural Engineering and Mechanics, 59 (2), 2016, 243-259. (Q2)
“Static and vibration properties of randomly oriented shape memory alloy short wires reinforced epoxy resin”, Journal of Reinforced Plastics and Composites 35 (14), 2016, 1104-1114 (Q2)
“Evaluation of the effective mechanical properties of shape memory wires/epoxy composites using representative volume element”, Journal of Composite Materials, 50 (13), 2016, 1761-1770 (Q2)
“Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites”, Mechanics of Advanced Composite Structures,‎ 3 (1), 2016, 1-7.
“Charpy impact behavior of clay/basalt fiber-reinforced polypropylene nanocomposites at various temperatures”, Journal of Thermoplastic Composite Materials, 29 (10), 2016, 1416-1428. (Q2)
“Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells”, Journal of Modarres, 14, No. 13, 2015, 131-142 (In Persian)
“Experimental investigation of creep behavior in Phenolic based polymer composites”, Journal of Science and Technology of Composites, 1, No. 2, 2015, 37-42
“Micromechanics modeling and experimental characterization of shape memory alloy short wires reinforced composites”, Journal of Science and Technology of Composites, 2, No.1, 2015, 1-6 (In Persian)
"Experimental investigation of repeated low velocity impact on GLARE with various energy levels", Journal of Solid and Fluid Mechanics, 5 (2), 2015, 43-56
"Numerical Study of Adhesive Single-Lap Joints with Composite Adherends Subjected to Combined Tension–Torsion Loads", Journal of Adhesion, 91, No. 3, 2015, 214-234 (Q1)
"Investigation of the response of an aluminium plate subjected to repeated low velocity impact using a continuum damage mechanics approach", Fatigue & Fracture of Engineering Materials & Structures, 38, No. 4, 2015, 475-488 (Q1)
"Hybridization effect of basalt and carbon fibers on impact and flexural properties of phenolic composites", Iranian Polymer Journal, 23, No. 10, 2015, 767-773 (Q2)
"Effect of joint geometry on behavior and failure modes of the sandwich T-joint under transverse static and dynamic loads", Journal of Adhesion, 91, No. 3, 2015, 154-176 (Q1)
"A global–local theory with stress recovery and a new post-processing technique for stress analysis of asymmetric orthotropic sandwich plates with single/dual cores", Computer Methods in Applied Mechanics and Engineering, 286, 2015, 192-215 (Q1)
"Buckling analysis of composite sandwich plates with flexible core using improved high-order theory", Mechanics of Advanced Materials and Structures, 22, No. 4, 2015, 233-247 (Q2)
"Frequency analysis of sandwich plate with active SMA hybrid composite face-sheets and temperature dependent flexible core", Composite Structures, 123, 2015, 408-419 (Q1)
"Evaluation of the effective mechanical properties of shape memory wires/epoxy composites using representative volume element", Journal of Composite Materials, Doi 0021998315596453, 2015 (Q2)
"Dynamic Response of Composite Sandwich Beams With Arbitrary Functionally Graded Cores Subjected to Low-Velocity Impact", Mechanics of Advanced Materials and Structures, 22, No. 8, 2015, 605-618 (Q2)
"Temperature-dependent buckling analysis of sandwich truncated conical shells with FG facesheets", Composite Structures, 131, 2015, 682-691(Q1)
“Experimental investigation of repeated low velocity impact on GLARE with various energy levels” Journal of Fluid Mechanics, 5, 2, 2015, 43-56 (In Persian)
"Charpy impact response of basalt fiber reinforced epoxy and basalt fiber metal laminate composites" - Experimental study", International Journal of Damage Mechanics, 23, No. 6, 2014, 729-744 (Q1)
"Biaxial wrinkling analysis of composite-faced sandwich plates with soft core using improved high-order theory", European Journal of Mechanics - A/Solids, 43, 2014, 68-77 (Q1)
"Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene-clay nanocomposites", Materials and Design, 53, 2014, 540-549 (Q1)
"Nonlinear vibration of functionally graded cylindrical shells embedded with a piezoelectric layer, Thin Walled Structures, 79, 2014, 8-15 (Q1)
"Free Vibrations of Functionally Graded Circular Cylindrical Shells under Internal Pressure", International Journal of Advanced Design and Manufacturing Technology, 6, No. 4, 2014, 49-58
"Assessment of different higher-order theories for low-velocity impact analysis of fibre-metal laminate cylindrical shells", Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, 228, No. 3, 2014, 160-189 (Q3)
"High-order modeling of circular cylindrical composite sandwich shells with a transversely compliant core subjected to low velocity impact", Journal of Mechanics of Advanced Materials and Structures, 21, No. 8, 2014, 680-695 (Q2)
"A finite element based global–local theory for static analysis of rectangular sandwich and laminated composite plates", Composite Structures, 107, 2014, 177-189 (Q1)
"Low velocity transverse impact response of a composite sandwich plate subjected to a rigid blunted cylindrical impactor", Composite Part B, 63, 2014, 111-122 (Q1)
"Creep analysis in smart single-strap adhesive joints reinforced by shape memory alloys - Experimental study", International Journal of Adhesion and Adhesive, 54, 2014, 21-29 (Q1)
"Charpy impact behavior of clay/basalt fiber reinforced polypropylene nanocomposites at various temperature", Thermoplastic Composite Materials, 29 (10), 2014, 1416-1428 (Q2)
"Static tensile and transient dynamic response of cracked aluminum plate repaired with composite patch - Numerical study", Applied Composite Materials, 21, 2014, 441-455 (Q1)
"Effect of joint geometry on the behavior and failure modes of sandwich T-joint under transverse static loads", Journal of Modeling in Engineering, 12, No. 36, 2014, 85-101
"Experimental bending analysis of strip sandwich and laminated composite plates, International Journal of Advanced Design and Manufacturing Technology, 7, No. 4 (29), 2014, 87-98
"Effect of chiral angle on tensile behavior modeling of single-walled carbon nanotubes", Journal of Mechanics of Advanced Materials and Structures, 21, No. 6, 2014, 505-515 (Q2)
“Finite element analysis for dental implants subjected to thermal loads”, Journal of Dental Medicine, 26, No. 4, 2014, 270-280 (In Persian)
"Behavior and failure modes of sandwich T-joint using cohesive zone material model and contact elements", Applied Composite Materials, 20, No. 1, 2013, 41-54 (Q1)
"Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory", Composite Structures, 96, 2013, 243-255 (Q1)
"Low velocity transverse impact response of functionally graded plates with temperature dependent properties", Composite Structures, 96, 2013, 64-74 (Q1)
"Static indentation response of an in-plane prestressed composite sandwich plate subjected to a rigid blunted indenter", European Journal of Mechanics - A/Solids, 38, 2013, 59-69 (Q1)
"Dynamic response of functionally graded circular cylindrical shells subjected to radial impulse load", International Journal of Mechanics and Materials in Design, 9, No. 1, 2013, 65-81 (Q1)
"Mixed LW/ESL models for the analysis of sandwich plates with composite faces", Composite Structures, 98, 2013, 330-339 (Q1)
"Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads", Composite Structures, 98, 2013, 253-260 (Q1)
"Experimental investigation on distance effects in repeated low velocity impact on fiber-metal laminates", Composite Structures, 99, 2013, 31–40 (Q1)
"Buckling of non-ideal simply supported laminated plate on Pasternak foundation", Applied Mathematics and Computation, 219, 2013, 6420-6430 (Q2)
"Modeling and transient dynamic analysis of pseudo elastic SMA hybrid composite beam", Applied Mathematics and Computation, 219, 2013, 9762-9782 (Q2)
" Mechanical Characterization of Clay Reinforced Polypropylene Nanocomposites at High Temperature", Fibers and Polymers, 14, No. 10, 2013, 1650-1656 (Q2)
"An Indentation law for doubly curved composite sandwich panels with rigid-plastic core subjected to flat-ended cylindrical indenters", Composite Structures, 105, 2013, 82-89 (Q1)
"Low-velocity impact response of doubly curved composite shell with embedded SMA wires, Composite Structures, 105, 2013, 216-226 (Q1)
" Effect of Thermal Cycling on Hardness and Impact Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers", Thermal Stresses, 36, 2013, 684-698 (Q1)
"A boundary element formulation for the heterogeneous functionally graded viscoelastic structures", Applied Mathematics and Computation, 225, 2013, 246-262 (Q2)
"A nonlinear finite element model using a unified formulation for dynamic analysis of multilayer composite plate embedded with SMA wires", Composite Structures, 106, 2013, 635-645 (Q1)
"Analytical Prediction of Indentation and Low-Velocity Impact Responses of Fully Backed Composite Sandwich Plates", Journal of Solid Mechanics, 5, No. 3, 2013, 278-289 (Q3)
"Aging Influence on Charpy Impact Behavior of Basalt Fiber Reinforced Epoxy Composites", International Journal of Advanced Design and Manufacturing Technology, 6, No. 2, 2013, 81-85
"Finite element modeling of T joint in sandwich panels under pull off loads", Journal of Amir Kabir, 44, No. 2, 2013, 11-19
"The Strain Rate Effect on Bending Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites", International Journal of Advanced Design and Manufacturing Technology, 5, No. 4, 2013, 33-37
"Effect of thermal shock cycling on the tensile bahavior of phenolic based composites reinforced with basalt and carbon fibers", Journal of Amir Kabir, 44, No. 2, 2013, 1-9 (In Persian)
"Nonlinear vibration of functionally graded cylindrical shells under radial harmonic load", Iranian Journal of Mechanical Engineering Transactions of the ISME,13 , No. 2 , 2013, (In Persian)
"Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach", Journal of Modarres, 2013, (In Persian)
"Bending properties of date palm fiber and jute fiber reinforced polymeric composite", International Journal of Advanced Design and Manufacturing Technology, 5, No. 4 (20), 2012, 59- 63
"High-order free vibration analysis of sandwich beams with a flexible core using dynamic stiffness method", Journal of Composite structures, 94, No. 5, 2012, 1503-1514 (Q1)
"A high-order theory for the analysis of circular cylindrical composite sandwich shells with transversely compliant core subjected to external loads", Journal of Composite structures, 94, No. 7, 2012, 2129-2142 (Q1)
"Buckling analysis of soft-core composite sandwich plates using 3D finite element method", Applied Mechanics and Materials, Vol. 105-107, 2012, 1768-1772 (Q4)
"Bending analysis of composite sandwich plates with flexible core using 3D finite element method", Applied Mechanics and Materials, Vol. 110-116, 2012, 1229-1236 (Q4)
"Numerical analysis on impact behavior of composite sandwich plates as energy harvesting structures", Applied Mechanics and Materials, Vol. 110-116, 2012, 1296-1304 (Q4)
"The effect of nanotube specifications on multi-scale modeling of nanocomposites", Applied Mechanics and Materials, Vol. 110-116, 2012, 1237-1244 (Q4)
"Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher-order theory", International Journal of Mechanical Sciences, 56, No. 1, 2012, 1-25 (Q1)
"Mechanical characterization of nanoclay reinforced polypropylene composites at high temperature subjected to tensile loads", Advanced Materials Research, Vol. 488-489, 2012, 567-571 (Q3)
"Modeling and simulation of controlled manipulation by AFM nano-robot", Applied Mechanics and Materials, Vol. 110-116, 2012, 3688-3695 (Q4)
"Tensile properties of clay/polypropylene nano composites at cryogenic temperature", Advanced Materials Research, Vol. 488-489, 2012, 562-566 (Q3)
"Numerical study on impact response of aircraft sandwich wing made of fiber metal laminate facesheets subjected to bird strike", Advanced Materials Research, Vol. 488-489, 2012, 8-13 (Q3)
"Free vibration analysis of tapered FRP transmission poles with flexible joint by finite element method", Structural Engineering and Mechanics, 42, No. 3, 2012, 409-424 (Q2)
"Analytical solution for bending analysis of soft-core composite sandwich plates using improved high-order theory", Structural Engineering and Mechanics, 44, No. 1, 2012, 15-34 (Q2)
"Effect of distributed attached mass on the vibration of sandwich panel using higher order ESL theory", Advanced Materials Research, 488, 2012, 35-39 (Q3)
"Effect of functionally graded core on dynamic response of sandwich panel subjected to transverse low velocity impact", Amir Kabir Journal of Mechanical Engineering, 43, No. 2, 2012, 19-26
"Analysis of free vibration of sandwich panels based on improved high order sandwich panel theory", Amir Kabir Journal of Mechanical Engineering, 43, No. 2, 2012, 27-33
"Comparison of compressive properties between vacuum infusion and hand lay-up method toward balsa core sandwich composites", Journal of Mechanical Research and Application, 4, No. 2, 2012, 33-40
"Free vibration analysis of sandwich plates with functionally graded facesheets and temperature-dependent material properties: A new approach", European Journal of Mechanics - A/Solids, 35, 2012, 61-74 (Q1)
"Finite element modeling of T-joint in sandwich panels under pull-off loads", Journal of Amir Kabir, Amir Kabir University of Technology, 44, No. 2, 2012, (In Persian)
"The effect of single filament and tow test methods on the mechanical properties of carbon fibers", Journal of Shahrood, Shahrood University of Technology, 3, No. 2, 2012, 1-10 (In Persian)
"Fracture analysis of semielliptical cracks at the interface of two functionally gradient materials using three dimensional finite element method", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225, No. 2, 2011, 103-110 (Q3)
"Static analysis of tapered FRP transmission poles using finite element method", Journal of Finite Elements in Analysis and Design, 47, 2011, 247-255 (Q1)
"Finite element modeling of low velocity impact on laminated composite plates and cylindrical shells", Journal of Composite Structures, 93, 2011, 1363-1375 (Q1)
"Mechanical behavior of basalt fiber reinforced and basalt-fiber metal laminate composites under tensile and bending loads", Journal of Reinforced Plastics and Composites, 30, No. 8, 2011, 647-659 (Q2)
"Numerical analysis of adhesively bonded T-joints with structural sandwiches and study of design parameters", International Journal of Adhesion & Adhesives, 31, 2011, 347–356 (Q1)
"Modelling of Low Velocity Impact of Laminated Composite Substructures", International Journal of Vehicle Structures & Systems, 3, No. 2, 2011, 96-106 (Q3)
"Thermal, mechanical and carbonization behavior of high temperature phenolic polymer", Journal of Advanced Materials in Engineering (Esteghlal), 30, No, 2, 2011, 69-81 (In Persian)
"Analysis of the effect of piezoelectric patches on the behavior of adhesively bonded scarf joints-An analytical study", Journal of Adhesion Science and technology, 25, 2011, 2539-2553 (Q2)
"Multi-scale modeling of nonlinear tensile behavior in single-walled carbon nanotube reinforced nanocomposites", International Journal of Modeling and Optimization, 1, No. 3, 2011, 199-204
"Investigation of relations between atomic number and composition weight ratio in PZT and SMA and prediction of mechanical behavior", Acta Physica Polonica A, 120, No. 3, 2011, 424-428 (Q3)
"Free vibrations of laminated composite shells with uniformly distributed attached mass using higher order shell theory including stiffness effect", Journal of Sound and Vibration, 330, 2011, 6355–6371 (Q4)
"Effect of geometrical and mechanical properties on behavior of sandwich beams with functionally graded face sheets under indentation loading", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225, No. 4, 2011, 231-244 (Q3)
"Indentation analysis of in-plane prestressed composite sandwich plates: An improved contact law", Key Engineering Materials, Vol. 471-472, 2011, 1159-1164 (Q3)
"An experimental study on the behavior of PP/EPDM/JUTE composites in impact, tensile and bending loadings", Journal of Reinforced Plastics and Composites, 30, No. 16, 2011, 1341-1347 (Q2)
"Experimental, theoretical and numerical studies on the response of square plates subjected to blast loading", Journal of Strain Analysis for Engineering Design, 46, 2011, 805-816 (Q2)
" Creep behavior of basalt and glass fiber reinforced epoxy composites", Journal of Mechanical Research and Application, 3, No. 1, 2011, 29-36
"Investigation on projectile nose and impact angle effects in high velocity impact on 4 ply glass/ carbon laminates", Journal of Energetic Materials, 6, No. 2 (12), 2011, 69-81 (In Persian)
"Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory", European Journal of Mechanics A/Solids, 31, 2011, 54-66 (Q1)
" Forced vibration of a sandwich panel with composite layers and a FGM core", J. Mechanics Aerospace, 6, No. 3, 2011, 83-95 (In Persian)
“Transient dynamic analysis of tapered FRP composite transmission poles using finite element method”, Composite Structures, 92, No. 2, 2010, 275-283 (Q1)
“Free vibration analysis of sandwich beams using improved dynamic stiffness”, Composite Structures, 92, No. 2, 2010, 387-394 (Q1)
"Dynamic response of pre-stressed fibre metal laminate (FML) circular cylindrical shells subjected to lateral pressure pulse loads", Composite Structures, 92, 2010, 1308-1317 (Q1)
"Free vibration response of composite sandwich cylindrical shell with flexible core", Composite Structures, 92, 2010, 1269-1281 (Q1)
"Vibration of non-ideal simply supported laminated plate on an elastic foundation subjected to in-plane stresses", Composite Structures, 92, 2010, 1478-1484 (Q1)
"Analytical Solution for Free Vibration of Sandwich Structures with a Functionally Graded Syntactic Foam Core", Materials Science Forum, 636-637, 2010, 1143-1149
"Free vibration analysis of sandwich beam carrying sprung masses", International Journal of Mechanical Sciences, 52, 2010, 1620-1633 (Q1)
"Transient Dynamic Response of Clamped-Free Hybrid Composite Circular Cylindrical Shells", Journal of Applied Composite Materials, 17, No. 2, 2010, 243-257 (Q1)
"Free vibrations of thick rectangular composite plate with uniformly distributed attached mass including stiffness effect", Journal of Composite Materials, 44, No. 24, 2010, 2897-2918 (Q2)
"Mechanical behavior of notched plate repaired with polymer composite and smart patches- Experimental study", Journal of Reinforced Plastics and Composites, 29, No. 19, 2010, 3021-3037 (Q2)
"Effect of patching on Charpy impact response of repaired notched plate- Experimental Study", Journal of Adhesion, 86, 2010, 561-585 (Q1)
"A mixed Ritz-DQ method for forced vibration of functionally graded beams carrying moving loads", Composite Structures, 92, 2010, 2497-2511 (Q1)
"Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials", Journal of Adhesion Science and Technology, 24, 2010, 1917-1928 (Q2)
"Analytical solution for two-dimensional magneto-thermoelastic response in FG hollow sphere with heat source", Turkish Journal of Environment Science and Engineering, 34, No. 4, 2010, 231-252 (Q3)
"Effect of piezoelectric patches on the behavior of adhesively bonded single lap joints", Journal of Adhesion, 86, 2010, 601-629 (Q1)
"Geometrical effects of the distributed attached mass on the natural frequency of thick cylindrical and spherical shell using higher order theory", Turkish Journal of Environment Science and Engineering, 34, No. 4, 2010, 189-199 (Q3)
"Forced vibration of a sandwich panel with composite layers and a FGM core" Aerospace Mechanics Journal (Dynamics, vibrations and control), 6 No. 3 (21), 2010, 83- 95.
“An experimental study on the Charpy impact response of cracked aluminum plates repaired with GFRP or CFRP composite patches”, Composite Structures, 89, 2009, 270-274 (Q1)
“Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads”, Journal of Thin Walled Structures, 47, Nos. 8-9, 2009, 970-983 (Q1)
“Transient dynamic response of initially stressed composite circular cylindrical shells under radial impulse load”, Composite Structures, 89, 2009, 275-284 (Q1)
“Creep analysis of fibre reinforced adhesive in single lap joint – experimental study”, International Journal of Adhesion & Adhesive, 29, No. 6, 2009, 656-661 (Q1)
“Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core”, Composite Structures, 91, 2009, 229-235 (Q1)
“Free vibration analysis of sandwich beam with FG core using the element free Galerkin method”, Composite Structures, 90, 2009, 373-379 (Q1)
"Buckling analysis of FG plate with smart sensor/actuator, Journal of Solid Mechanics, 1, No. 3, 2009, 201-212 (Q3)
"Experimental study on effective parameter for thermal cutting of glass sheets, Journal of Mechanical Research and Applications, 1, No. 1, 2009, 45-51
"Analytical solution for two-dimensional magneto-Thermo-Mechanical Response in FG Hollow Sphere", Journal of Solid Mechanics, 1, No. 3, 2009, 201-212 (Q3)
" The effect of some physical and geometrical parameters on improvement of the impact response of smart composite structures", International Journal of Mathematical Models and Methods in Applied Sciences, 3, No. 3, 2009, 266-274 (Q4)
" Analysis on centrifugal load effect in FG hollow sphere subjected to magnetic field", Journal of Solid Mechanics, 1, No. 4, 2009, 300-312 (Q3)
“Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads”, International Journal of Adhesion & Adhesives, 28, 2008, 436-444 (Q1)
“Numerical study of lap joints with composite adhesives and composite adherends subjected to in-plane and transverse loads”, International Journal of Adhesion & Adhesives, 28, 2008, 411-418 (Q1)
“Dynamic response of functionally graded circular cylindrical shells”, Advanced Materials Research, Vol. 47-50, 2008, 608-611 (Q4)
“Impact behavior of cracked plate repaired with composite and FML patches”, Advanced Materials Research, Vol. 47-50, 2008, 612-616 (Q4)
“Effect of initial stresses on the response of FRP plates under low velocity transverse impact”, Journal of Ship Technology, 4, No. 2, 2008, 1-9
“Analysis and optimization of smart hybrid composite plates subjected to low-velocity impact using the response surface methodology (RSM)”, Journal of Thin Walled Structures, 46, 2008, 1204-1212 (Q1)
“Analysis of fibre reinforced composite plates subjected to transverse impact in the presence of initial stresses”, Composite Structures, 77, 2007, 263-268 (Q1)
“Response of composite sandwich panels with stiff/ flexible core to low velocity transverse impact: a new dynamic model”, Int. Journal of Impact Engineering, 34, 2007, 522-543 (Q1)
“Effect of physical and geometrical parameters on transverse low velocity impact response of sandwich panels with a transversely flexible core”, Composite Structures, 77, 2007, 430-443 (Q1)
“Dynamic response of smart hybrid composite plates subjected to low velocity impact”, Journal of Composite Materials, 41, No. 19, 2007, 2347-2370 (Q2)
“Theoretical analysis of explosive compaction of tungsten powder”, Journal of Aerospace Mechanics, 3, No. 1, 2007, 23-32 (In Persian)
“The role of some effective parameters on the impact response of the smart hybrid composite plates”, Journal of Faculty of Engineering, University of Tehran, 41, No. 4, 2007, 459-472 (In Persian)
“Effect of smart stiffening procedure on low velocity impact response of smart structures”, Journal of Materials Processing Technology, 190, 2007, 142-152 (Q1)
“Low-velocity impact response of active thin-walled hybrid composite structures embedded with SMA wires”, Journal of Thin Walled Structures, 45, 2007, 799-808 (Q1)
“Response of in-plane linearly pre-stressed composite sandwich panels with transversely flexible core to low velocity impact”, Journal of Sandwich Structures and Materials, 8, No. 2, 2006, 157-181 (Q1)
“Analytical prediction of low velocity impact response of composite sandwich panels using new TDOF springs-masses-damper model”, Journal of Composite Materials, 40, No. 18, 2006, 1671-1689 (Q2)
“Dynamic response of in-plane pre-stressed sandwich panels with a visco-elastic flexible core and different boundary conditions”, Journal of Composite Materials, 40, No. 16, 2006, 1449-1468 (Q2)
“High order dynamic response of composite sandwich panels with flexible core under simultaneous low velocity impacts of multiple small mass”, Int. Journal of Solids and Structures, 43, 2006, 6667-6687 (Q1)
“Low-speed impact response of biaxial pre-stressed composite sandwich panels using new analytical procedure”, Journal of Amir Kabir, Amir Kabir University of Technology, 16, No. 63-B, 2006, 49-58
“Experimental and semi-theoretical analysis of plastic response of isotropic square plates under blast loading”, Journal of Energetic Materials, 1, No. 2, 2006, 43-50 (In Persian)
“Explosive powder metallurgy, a new method for powder forming”, Journal of Research and Development in Energetic Materials, 2, No. 2, 2006, 55-65 (In Persian)
“A new approach to static and dynamic analysis of composite plates with different boundary conditions”, Composite Structures, 69, 2005, 149-155 (Q1)
“Local and global damped vibrations of plates with a visco-elastic soft flexible core: an improved high- order approach”, Journal of Sandwich Structures and Materials, 7, No. 5, 2005, 431-456 (Q1)
“Transient dynamic response of composite circular cylindrical shells under radial impulse load and axial compressive loads”, Journal of Thin Walled Structures, 43, 2005, 1763-1786 (Q1)
“A study of the mechanical properties of steel/ aluminum/ GRP laminates”, Journal of Materials Science and Engineering A, 412, 2005, 137-140 (Q1)
“Dynamic response of pre-stress fibre composite subjected to transverse impact”, Journal of Amir Kabir, Amir Kabir University of Technology, 16, No. 62-D, 2005, 37-43 (In Persian)
“Introducing a new mathematical model and developing a computer package for 3D machining of fibre reinforced polymer composites”, Journal of Esteghlal, Isfahan University of Technology, 21, No. 2, 2003 (In Persian)
“Analysis of static and dynamic stresses, Natural frequencies and failure of composite and metallic bicycles frame by using finite element method”, Iran Journal of Polymer Science and Technology, 15, 3, 2002, 195-207 (In Persian)
“Transverse impact analysis of a moving body on orthotropic plate and study the influence of the effective parameters”, Journal of Amir Kabir, Amir Kabir University of Technology, 13, No. 50, 2002 (In Persian)
“Properties and behavior of hybrid composite (FML) of reinforced polyester with glass fibers and Aluminum (GLALL), an experimental study”, Iran Journal of Polymer Science and Technology, 14, 5, 2001, 323-331 (In Persian)
“Analysis of the dynamic response of large orthotropic elastic plates to transverse impact”, Journal of Aerospace Society of India, May 1995,
“Analysis of impact of a moving body on an orthotropic elastic plate”, Journal of AIAA, 32, No. 4, 1994, 850-856 (Q1)

(Q1) 74/189 = 39% + (Q2) 36/189 = 19% Total = 58%

Reviewed Conference Papers

“Low velocity impact properties of sandwich panels with FML face sheets”, X-Mech, Tehran, Iran, 2018.
“Experimental Investigation on Flexural Properties of Sandwich Panels with FML Face Sheets Reinforced by SMA wires”, X-Mech, Tehran, Iran, 2018.
“Prediction of matrix cracking density in laminated composites using micromechanics”, (CCFA-6), Tehran, Iran, 2018.
“Effects of layup on energy absorption in laminated composites under Charpy impact test”, (CCFA-6), Tehran, Iran, 2018.
" Experimental Buckling Analysis of Laminated Composite Cylindrical Shells with Embedded Shape Memory Alloy Wires', The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , Tehran, 2016
"Experimental study on sandwich panels with Edge Insert under Pull out load", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , Tehran, 2016
"Thermal cycling and environmental effect on tensile behavior of adhesive single lap joints for fiber metal laminate", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, 2016
"Autonomous Self-healing fiber metal laminates", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , Tehran, 2016
"Experimental investigation on flexural properties of self-healing composites fabricated by short hollow fibers", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , Tehran, 2016
"Numerical analysis and manufacture of carbon leg prostheses", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , Tehran, 2016
"On the Flexural Behavior of Multiscale Nano-Silica/E-glass/Epoxy Anisogrid-Stiffened Composite Structures", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , 2016, Tehran, Iran
"Dynamic stress intensity factor of finite piezoelectric composite plate under impact load", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , Tehran, 2016, Tehran, Iran
"Experimental investigation of compression properties of basalt continuous filament epoxy composite filled with shape memory wire", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran, 2016
"Experimental and numerical investigation on low velocity impact of GLARE fiber metal laminates", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016) , 2016, Tehran, Iran
“Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method”, (CCFA-5), Tehran, Iran, 2016.
“Experimental study on compressive strength of resin-epoxy composite reinforced with shape memory alloy fiber under static load and assessment of some effective parameters”, (CCFA-5), Tehran, Iran, 2016.
“Experimental investigation on the energy absorption of self-healing composites subjected to impact loading”, (CCFA-5), Tehran, Iran, 2016.
“Investigation of the Mechanical Properties of the Cylindrical Composite Shells in Experiment”, (CCFA-5), Tehran, Iran, 2016.
“Experimental study of the single strap hybrid joint under static load”, (CCFA-5), Tehran, Iran, 2016.
“Tensile properties of self-healing metal matrix composites reinforced with superelastic NiTi wires”, (CCFA-5), Tehran, Iran, 2016.
“Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method”, (CCFA-5), Tehran, Iran, 2016.
“Experimental study on the effect of stacking sequence of layers in the fiber metal laminates subjected to static and dynamic tests”, (CCFA-5), Tehran, Iran, 2016.
“Effect of thermal cycles on repairing the edge-cracked aluminum plates by using carbon/epoxy composite patches under tensile load”, (CCFA-5), Tehran, Iran, 2016.
“Experimental buckling of cylindrical composite shell embedded with shape memory alloys”, 15-th International Conference on Iranian Aerospace Society, Tehran, Iran, 2016.
"Dynamic response of piezoelectric sensors with central cracks using FEM", 5th International conference of Acoustic and vibration, Tehran, Iran, 2015
“Experimental analysis of tool drop with repeated impact on GLARE plate”, X-Mech-2014,Tehran, 2014
“Experimental and numerical investigation on the interfacial behavior of shape memory alloy (SMA) /Epoxy composites”, X-Mech-2014, Tehran, 2014
“Effect of shape memory alloy wires on energy absorption of laminated composites in Tensile impact- Experimental study”, X-Mech-2014, Tehran, 2014
“Experimental investigation on tensile impact behavior of sandwich plates with shape memory alloy reinforced composite face sheets”, X-Mech-2014, Tehran, 2014
“Effect of environment and thermal cycles on tensile behavior of hybrid single lap joints for fiber metal laminates”, X-Mech-2014, Tehran, 2014
“Thermal cycling and environmental effect on tensile impact behavior of single adhesive lap joints for fiber metal laminate”, X-Mech-2014, Tehran, 2014
"Effect of SMA force actuators on vibration and impact dynamic of doubly curved composite shell", Smart'13, Torino, Italy, 2013
"Static behavior of piezoelectric integrated sandwich plate to use as energy harvesting structures”, ISME2013, Tehran, 2013
"Non-linear dynamic response of active hybrid composite beam embedded with SMA wires", International Conference on Mechanics of Nano, Micro and Macro Composite Structures, ICNMMCS, Torino, Italy, June 2012
"Resonance phenomenon analysis in sandwich structures with SMA reinforced composite face sheets", Second international conference on Acoustics and Vibration (ISAV2012), 26-27 , Dec. 2012
“The Effect of Hybridization on Impact Properties of Basalt and Carbon Fibers Reinforced Phenolic Composites”, 3rd International Conference on Composites: Characterization, Fabrication and Application, CCFA-3, Tehran, Iran, Dec. 2012
"Effect of impactor parameters on the impact response of composite plates", The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, Dec. 2012
"Experimental study of thermal cycled cracked aluminum plate repaired with composite patch under tensile load", The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, Dec. 2012
"Numerical study of central cracked aluminum plate repaired with composite patches under transient dynamic loading", The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, Dec. 2012
"Development of an innovative fabrication method for orthogonally stiffened composite cylindrical shells", The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, Dec. 2012
"Numerical study of adhesive single lap joints for composite adherends subjected to combined tension-torsion loads", ACE-X 2012, Istanbul, Turkey, 2012
"Effects of joint geometry on the sandwich T-joint under static and dynamic conditions", ACE-X 2012, Istanbul, Turkey, 2012
"Impact properties of clay reinforced polypropylene nanocomposites at different temperatures", ICNNSA, Masjed-Soleyman, Iran, 2012
"Improvement of bending properties of polymeric composites using date palm and jute natural fibers", X-MECH 2012, Tehran, Iran, 2012
"Experimental creep analysis of a single‐strap adhesive joint reinforced by shape memory alloys ", X-MECH 2012, Tehran, Iran, 2012
"Effect of strain rate on flexural properties of polymer composites reinforced by basalt and carbon fibers", X-MECH 2012, Tehran, Iran, 2012
"Comparison of compressive properties between vacuum infusion and hand lay-up method toward sandwich composites reinforced by E-glass and kevlar fibers", X-MECH 2012, Tehran, Iran, 2012
"Synthesis and characterization of high temperature nanoparticle-filled phenolic composite", X-MECH 2012, Tehran, Iran, 2012
"Effect of strain rate on tensile properties of carbon fibers by resin impregnated tow", X-MECH 2012, Tehran, Iran, 2012
"Tensile properties of clay/polypropylene nanocomposites at cryogenic temperature", ICKEM 2012, Singapore, 2012
"Free vibration of composite curved shells reinforced with shape memory alloys", 11nd Aerospace Conference, Sattari University, Tehran, Iran, March 2012
"The effect of hybridization on impact properties of basalt and carbon fibers reinforced phenolic com", CCFA-3, Tehran, Iran, 2012
"The effect of nanotube specifications on multi-Scale modeling of nanocomposites", The 2^nd International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT 2011), Singapore, Feb. 2011
"Bending analysis of composite sandwich plates with flexible core using 3D finite element method", The 2^nd International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT 2011), Singapore, Feb. 2011
"Modeling and simulation of controlled manipulation by AFM nano robot", The 2^nd International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT 2011), Singapore, Feb. 2011
"Numerical analysis on impact behavior of composite sandwich plates as energy harvesting structures", The 2^nd International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT 2011), Singapore, Feb. 2011
"Biomedical applications of smart materials in dentistry", 1^st MEFOMP International Conference of Medical Physics, Shiraz, Iran, Oct. 2011
"Creep behavior of basalt and glass fiber reinforced epoxy composites", CCFA-2, Kish, Iran, 2011
"Low-velocity impact response analysis of fibre-metal laminate (FML) circular cylindrical shells using a simple new contact force estimation procedure", CCFA-2, Kish, Iran, 2011
"Wrinkling analysis of rectangular soft-core composite sandwich plates", ACE-X 2011, Algarve, Portugal, 2011
"Free Vibration Analysis of Sandwich Plates with FGM Face Sheets and Temperature-Dependent", ACE-X 2011, Algarve, Portugal, 2011
"Effect of Physical and Geometrical Parameters on Transverse Low-Velocity Impact Response of Composite Sandwich Panels with Functionally Graded Core", ACE-X 2011, Algarve, Portugal, 2011
"Aging Influence on Charpy Impact Behavior of Basalt fibers Reinforced Epoxy Composite", Proceedings of the polymer processsing society asia/australia regional meeting, PPS 2011, Nov. 2011, Kish Island, Iran
"Thermal Shock cycling effect on Flexural propertiesof phenolic base composite, proceedings of the polymer", Processsing society asia/australia regional meeting, PPS 2011, Nov. 2011, Kish Island, Iran
"Tensile properties of Alkali Treated and raw date palm fiber reinforced EPDM/PP composites", Proceedings of the Polymer Processsing Society Asia/Australia Regional Meeting, PPS 2011, Nov. 2011, Kish Island, Iran
"Improvement of tensile properties of polymeric composites using date palm jute natural fibers", Malaysian Polymer International Conference, MPIC 2011, pp 418, Malaysia
"Buckling analysis of corrugated sandwich plates with soft core using three dimensional finite element method", International Conference on Mechanical Engineering, London, 2011
"Indentation Analysis of In-Plane Pre-stressed Composite Sandwich Plates", 8th International Conference on Composite Science and Technology, 2011, Malaysia, pp 200
"Non-linear forced vibration of a pseudoelastic SMA hybrid composite beam", Proc. of Int. Conf. on Advances in Industrial and Production Engineering (AIPE), Malaysia, 2011
"Free vibration analysis of sandwich plates with functionally graded face sheets by improved high-order sandwich plate theory", Proc. of Int. Conf. on Advances in Industrial and Production Engineering, (AIPE), Malaysia, 2011
"Low-velocity impact response analysis of fibre-metal laminate (FML) circular cylindrical shells using a simple new contact force estimation procedure", CCFA-2, Kish, Iran, 2011
"Carbon Fibres in Human Body", Proceedings of Int. Conf. on Chemical Engineering and Applications (CCEA 2010), Singapore, 2010
"Fracture and mechanical behavior of nano clay reinforced epoxy adhesive in bonded joints", Proceedings of Int. Conf. on Chemical Engineering and Applications (CCEA 2010), Singapore, 2010
"Creep analysis of reinforced adhesives in adhesively single lap joints", Proceedings of Int. Conf. on Chemical Engineering and Applications (CCEA 2010), Singapore, 2010
"Effect of variable geometric piezoelectric patches on vibration of FG plate under constant electric charge", Advances and Trends in Structural Engineering, Mechanics and Computation- SEMC 2010, South Africa, 2010
"Effect of distributed attached patches on fundamental natural frequency of thick cylindrical and spherical shells using higher order shell theory", Advances and Trends in Structural Engineering, Mechanics and Computation- SEMC 2010, South Africa, 2010
"Geometry and core materials effects on performance of light weight sandwich
T-joint adhesive bonding", ACE-X 2010, France, 2010
"Effect of Piezoelectric patches on behavior of adhesively bonded scarf joints", ACE-X 2010, France, 2010
"Indentation of sandwich beams with functionally graded skins and transversely flexible core", ACE-X 2010, France, 2010
"Fatigue behavior of notched aluminum plates repaired by smart and composite patches", Proceedings of the ASME 2010, Turkey, 2010
"Bending analysis of sandwich panels with flexible core using high order shear deformation theory", AERO 2010, Iran, 2010
"Buckling analysis of sandwich panels with flexible core using high order shear deformation theory", AERO 2010, Iran, 2010
"Study the effect of crack location at contacting root on stress intensity factor", ISME 2010, Iran, 2010
"Study the effect of adding metal oxide particles on thermal and mechanical properties phenolic nano composite", ISME 2010, Iran, 2010
"Two different approaches in molecular-mechanics based finite element modeling on tensile behavior of single-walled carbon nanotubes", Int. Cong. on Nanoscience and Nanotechnology, Shiraz, Iran, Nov. 2010
"The effect of chiral angle on the tensile behavior of single-walled carbon nanotubes", Int. Cong. on Nanoscience and Nanotechnology, Shiraz, Iran, Nov. 2010
"High order damped vibration of composite sandwich shell with a viscoelastic soft core", ECCM14, Budapest, Hungary, Jun 2010
"Repair of cracked metallic marine structures with smart composite patches, ICOPMAS 2010, Dec. 2010, Tehran, Iran
“Effect of Geometrical parameters on dynamic response of sandwich panels with composite skins subjected to low velocity impact”, IAS, International conference of Iranian aerospace society, Esfahan, Iran, 2009 (Persian)
“Free vibration analysis of sandwich panels with FGM core by improved higher order theory”, IAS, International conference of Iranian aerospace society, Esfahan, Iran, 2009 (Persian)
“Numerical analysis of normal and inclined impact of two components armor and the influence of incident angle on performance”, IAS, International conference of Iranian aerospace society, Esfahan, Iran, 2009 (Persian)
“Study the combination effect of plane stress and non-ideal supports on free vibration of laminated composite plates”, IAS, International conference of Iranian aerospace society, Esfahan, Iran, 2009 (Persian)
“Free vibration analysis of laminated composite plates with non-ideal supports on Pasternak elastic foundation”, IAS, International conference of Iranian aerospace society, Esfahan, Iran, 2009 (Persian)
“Free vibration analysis of sandwich beam by dynamic stiffness method”, IAS, International conference of Iranian aerospace society, Esfahan, Iran, 2009 (Persian)
“Creep behavior of fibre reinforced adhesives in single lap joints”, Seico 09, SAMPE Europe, France, 2009
“A new improved high-order theory for vibration analysis of sandwich panels with fexible FGM core”, Seico 09, SAMPE Europe, France, 2009
“Responses of double-sided repaired notched aluminum plate subjected to Charpy impact”, Seico 09, SAMPE Europe, France, 2009
“Study normal and inclined impact on ceramic/composite armor”, 17^th Int. Conf. of Mechanical Eng., University of Tehran, Iran, 2009 (Persian)
“Free vibration analysis of sandwich beam with flexible core by dynamic stiffness method”, 17^th Int. Conf. of Mechanical Eng., University of Tehran, Iran, 2009 (Persian)
“Free vibration analysis of thick cylindrical shell with distributed attached mass by Higher order shear theory”, 17^th Int. Conf. of Mechanical Eng., University of Tehran, Iran, 2009 (Persian)
“Buckling analysis of laminated composite plate on Pasternak foundation with non- ideal supports”, 17^th Int. Conf. of Mechanical Eng., University of Tehran, Iran, 2009 (Persian)
"Free vibrations of functionally graded circular cylindrical shells under internal pressure", 17^th Int. Conf. of Mechanical Eng., University of Tehran, Iran, 2009
"Analytical solution for free vibration of sandwich structures with a functionally graded syntactic foam core", 5^th International Materials Symposium, Lisbon, Portugal, 2009
“Effect of piezoelectric patches on behavior of adhesively single lap joint subjected to tensile loading”, ACE-x 2009, Rome, Italy, 2009
“Effect of adhesive patching on Charpy impact response of repaired notched plate”, ACE-x 2009, Rome, Italy, 2009
“Mechanical properties of nano-clay reinforced epoxy adhesive in bonded joint for composite material”, ACE-x 2009, Rome, Italy, 2009
"Experimental characterization of composite cross arms for distribution lines", 24^th International Power System Conference, Tehran, Iran, 2009
“Vibration properties of fibre metal laminates based on glass fibre reinforced polyster”, SEICO 08, SAMPE Europe, France, 2008
“The use of composite adhesives in bonded joints for composite structures subjected to static and dynamic loads”, SEICO 08, SAMPE Europe, France, 2008
“Study the vibration behavior of cylindrical sandwich shell with a transversely flexible core”, SEICO 08, SAMPE Europe, France, 2008
8 “Low velocity impact response of sandwich structures with transversely flexible core and FML face sheets”, ICSS8, Portugal, 2008
“Study the effective parameters on dynamic behavior of laminated composite plates for optimization purposes”, 16^th Int. Conference of Mechanical Engineering, University of Bahonar, Kerman, 2008 (Persian)
“Dynamic response of composite cylindrical shells under internal pressure and lateral pulse”, 16^th Int. Conference of Mechanical Engineering, University of Bahonar, Kerman, 2008 (Persian)
“Weight optimization for reinforced composite cylindrical shells”, 16^th Int. Conf. of Mechanical Eng., University of Bahonar, Kerman, 2008 (Persian)
“Free vibration and mode shape study for sandwich panels with and without distributed attached mass with clamped and mixed boundary conditions”, IAS, International of Aerospace Society of Iran, Sharif University, Iran, 2008 (Persian)
“Study the geometrical parameters on vibration behavior of sandwich panel with flexible core and attached mass with clamped and hinged boundary conditions”, IAS, International of Aerospace Society of Iran, Sharif University, Iran, 2008 (Persian)
“Study the effect of location of external mass on free vibration of sandwich panel with flexible core by improved higher order theory”, IAS, International of Aerospace Society of Iran, Sharif University, Iran, 2008 (Persian)
“Dynamic response of pre-stressed fibre metal laminate (FML) circular cylindrical shells”, MCM 2008, Latvia, 2008
“Experimental study of the mechanical characteristics of new hybrid fibre metal laminates, MCM 2008, Latvia, 2008
“Creep analysis of fibre reinforced adhesive in single lap joint – experimental study”, ACE-X 08, Spain, 2008
“Experimental characterization of composite and smart patching repaired edge cracked plate in Charpy impact”, ACE-X 08, Spain, 2008
“Dynamic response of functionally graded circular cylindrical shells”, MFMS, Hongkong, 2008
“Impact behavior of cracked plate repaired with composite and FML patches”, MFMS, Hongkong, 2008
“Study the comparison of composite and FML patches made from carbon fibre reinforced cracked plate in Charpy impact test”, IC2MS, Malaysia, 2008
“Effect of physical and geometrical parameters on response of sandwich panel with flexible core carrying distributed mass”, IC2MS, Malaysia, 2008
“Effect of fibre reinforced adhesives in bonded joints with composite adherends subjected to tensile and impact loads- numerical study”, CCFA-1, Kish, Iran, 2008
“Free vibration of a rectangular sandwich panels with a flexible core carrying distributed attached mass”, CCFA-1, Kish, Iran, 2008
“Transient dynamic response of clamped-free hybrid composite circular cylindrical chells”, CCFA-1, Kish, Iran, 2008
“Free vibration analysis of FRP transmission tapered pole by finite element method”, PSC 2008, Iran, 2008 (Persian)
“Modeling elastic modulus of polymer/CNT nanocomposites using a modified halpin-Tsai micromechanical model and artificial neural networks”, 2^nd international congress on nanoscience and nano technology, University of Tabriz, Iran, 2008
“Response of composite sandwich panels to simultaneous low velocity transverse double- sided impacts at several points”, ICRACM, New Delhi, India, 2007
“Bonded single lap joints with composite adhesives and composite adherends subjected to in-plane and out-plane static loads”, ICRACM, New Delhi, India, 2007
“Comparison between the displacements of square plates under blast loading by experimental analysis”, ICRACM, New Delhi, India, 2007
“The effect of initial stresses on the response of fibre reinforced composite plates under low velocity transverse impact, DFC9 – Shefield University, UK, 2007
“Influence of core density and face thickness on the response of composite sandwich panels subjected to low velocity impact”, DFC9 – Shefield University, UK, 2007
“Effect of strain rate and temperature on fracture behavior of glass fibre reinforced metal laminates”, COMP07, Corfu, Greece, 2007
“The role of shape memory alloys on improvement the impact response of smart composite structures”, COMP07, Corfu, Greece, 2007
“Numerical study of lap joints with composite adhesives and composite adherends subjected to in-plane and transverse loads”, ACE-X, Algarve, Portugal, 2007
“Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to tensile and fatigue loads”, ACE-X, Algarve, Portugal, 2007
“The influence of adhesive reinforcement in performance of bonded lap joints in composite structures subjected to impact and bending loads”, DSL 2007, Algarve, Portugal, 2007
“Experimental study of processing parameters of filament winding on physical and mechanical properties of composite pressure vessels”, 15^th International Conference of Mechanical Engineering, Amir Kabir University, Iran, 2007
“Theoretical and experimental analysis of plastic response of rectangular plates under uniform explosive loads”, 14^th International Conference of Mechanical Engineering, Esfahan University, Esfahan, 2006, (Persian)
“Buckling and vibration study of laminated cylindrical composite shells”, 14^th International Conference of Mechanical Engineering, Esfahan University, Esfahan, 2006, (Persian)
“Under water forming compaction of powder metallurgy for fabrication of tungsten parts”, 14^th International Conference of Mechanical Engineering, Esfahan University, Esfahan, 2006, (Persian)
“Dynamic response of shape memory polymer composite plate in low velocity large mass impact”, International Conference on Composite Materials and Nano-Structures, IC2MS-06, Malaysia, 2006
“Dynamic response of sandwich panels with a flexible core under simultaneous low velocity impacts of multiple small masses”, 8^th Biennial ASME Conference, Torino, Italy, 2006
“Numerical simulation and experimental study of explosive compaction of tungsten powder”, Proceedings of 2^nd WSEAS Int. Conference on Applied and Theoretical Mechanics, venice, Italy, 2006
“Finite element analyses of two and three dimensional crack problem in fibre metal laminated cylinder”, 12^th European Conference on Composite Materials (ECCM12), Biarritz, France, 2006
“Analysis of smart hybrid composite plate under low velocity impact”, ICCST-6, Durban, South Africa, 2006
“Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads”, ICCST-6, Durban, South Africa, 2006
“Prediction of low-speed impact response of composite sandwich panels using new three degree-of-freedom model”, 9^th International Conference of ISME, University of Esfahan, Esfahan, May 2005
“Low velocity impact response of composite sandwich panels using in fast ships by new three degree of freedom model”, International Conference on Fast Ships, MAU, Shiraz, 2005
“Effect of the core density on low velocity impact response of composite sandwich panels with a flexible core”, 3th International Conference on Sc. and Tech. of Composite Materials, Boines Aires, Argentina, 2005
“Compaction forming of tungsten powder”, 1^st International Conference on Manufacturing Engineering, TICME, Tehran, 2005
“Optimization of sandwich plates for structures of satellite using genetic algorithms”, 5^th Iranian Aerospace Conference, Esfahan University, Esfahan, 2004, (Persian)
“Minimizing weight and price for the composite plates using genetics algorithms”, 5^th Iranian Aerospace Conference, Esfahan University, Esfahan, 2004, (Persian)
“Experimental study on tensile, impact and bending properties of newly developed fibre metal laminates (FML) used in aerospace industry, 5^th Conference of Aerospace Society, Esfahan, Iran, 2004
“Transient dynamic of composite cylindrical shells”, 5^th Conference of Aerospace Society, Esfahan, Iran, 2004, (Persian)
“Study the free vibration of composite cylindrical shells”, 5^th Conference of Aerospace Society, Esfahan, Iran, 2004, (Persian)
“Study the buckling and free vibration of composite cylindrical shells”, 5^th Conference of Aerospace Society, Esfahan, Iran, 2004, (Persian)
“Design and analysis of a typical wing for flying objects”, 8^th International Conference of ISME, Tarbiat Modaress University, Tehran, 2004, (Persian)
“Design of an integrated hybrid composite drive shaft using aluminum and composite materials for a typical passenger car”, 8^th International Conference of ISME, Tarbiat Modaress University, Tehran, 2004, (Persian)
“Damped vibrations of sandwich plates with a visco-elastic soft flexible core- an improved higher order approach”, 8^th International Conference of ISME, Tarbiat Moddares University, Tehran, 2004
“A study of the mechanical properties of steel/ aluminum/ GRP laminates”, International Conference on Advanced Study in Composite Materials, Banaras Hindu University, Banaras, India, Dec. 2004
“Experimental study of effective parameters on thermal cutting of glass”, 5^th conference on Manufacturing Engineering, Amir Kabir University, Tehran, 2003, (Persian)
“Controller design for reducing the unwanted vibration in passenger car trains”, 11^th Conference on Mechanical Engineering, Mashhad University, Mashhad, 2003, (Persian)
“Dynamic modeling of passenger car trains to minimize the vibration to low frequencies”, 11^th Conference on Mechanical Engineering, Mashhad University, Mashhad, 2003, (Persian)
“Thermal cutting of glass by hot air jet”, 11^th Conference on Mechanical Engineering, Mashhad University, Mashhad, 2003, (Persian)
“Finite element analysis in welded substructures considering the mechanical properties subjected to primary and secondary Stresses”, 11^th Conference on Mechanical Engineering, Mashhad University, Mashhad, 2003, (Persian)
“Vibrational study of polyster reinforced with glass fibre and aluminum sheets", Iranian Conference on Polymer Science and Technology, ISPST 2003, Tehran, May 2003
“Study the tensile, impact and bending properties of steel/ aluminum/ glass reinforced polymer hybrid composites (FML)”, Iranian Conference on Polymer Science and Technology, ISPST 2003, Tehran, May 2003
“Analysis of polymer composite cross – arms and the effect of geometry and lay- up on their mechanical properties”, Iranian Conference on Polymer Science and Technology, ISPST 2003, Tehran, May 2003
“Analysis of composite cross-arm and the ply sequence and geometry on its mechanical properties”, 18^th international Conference on Electrical Engineering, MATN Research Centre, Electricity Ministry, Tehran, 2003, (Persian)
“The effect of composite patches on the natural frequency and mode shapes of cracked aluminum plates”, 4^th Student Conference of Mechanical Engineering, Azad University, South Tehran Branch, Tehran, 2003, (Persian)
“Statistical study of the effect of ply sequence and fibre volume fraction on analysis of hole in the metal matrix composite plates”, 4^th Student Conference of Mechanical Engineering, Azad University, South Tehran Branch, Tehran, 2003, (Persian)
“Study the theoretical and experimental methods on fabrication of liners for flying objects”, 6^th Conference on Manufacturing Engineering, Amir Kabir University, Tehran, 2003, (Persian)
“Design and optimization of hybrid composite drive shafts of Peugeot RD”, 6^th Conference on Manufacturing Engineering, Amir Kabir University, Tehran, 2003, (Persian)
“Dynamic analysis of two dimensional frictional contact by finite element method”, Proceeding of 10^th International conference of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, 2002
“Experimental study of FML composites”, Proceedings of 10^th International conference of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, 2002, (Persian)
“Strength prediction and failure mechanism in mechanical joints on composite materials”, Proceeding of 10^th International conference of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, 2002, (Persian)
“Improved Navier method for vibrational analysis of orthotropic laminated rectangular plates with different boundary conditions”, Proceeding of 10^th International conference of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, 2002
“Analysis of symmetrical balanced composite plates subjected to low velocity impact”, Proceeding of 10^th International conference of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, 2002, (Persian)
“Analysis of composite plates under transverse impact with the presence of initial stresses”, Proceeding of 10^th International conference of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, 2002, (Persian)
“Static and natural frequencies of metallic and composite cross-arms”, 17^th International Conference of Electrical Engineering, MATN Research Centre, Electricity Ministry, Tehran, 2002, (Persian)
“Dynamic modeling of passenger, chair and wagon structure to minimize the frequency in the passenger car trains”, International Conference on safety and Accident Precautions, Ministry of Transportation, Tehran, 2002, (Persian)
“Transverse and torsional vibration of polyster reinforced glass fibre and aluminum sheets”, 4^th Iranian Aerospace Conference, Amir Kabir University, Tehran, 2002, (Persian)
“The effect of initial stresses on the response of composite plates subjected to transverse impact”, 4^th Iranian Aerospace Conference, Amir Kabir University, Tehran, 2002, (Persian)
“Dynamic response of fibre composite plates subjected to low velocity impact and study the effect of ply sequence”, 4^th Iranian Aerospace Conference, Amir Kabir University, Tehran, 2002, (Persian)
“Fracture analysis of glass cutting by thermal stresses”, 5^th International Conference of ISME, Guilan University, Guilan, 2001, (Persian)
“Characterization of polymer composites GLALL”, 5^th International Conference of ISME, Guilan University, Guilan, 2001, (Persian)
“Study the effective parameters on glass cutting by thermal shock”, 4^th International Conference of ISME, Sharif University of Technology, Tehran, 2000, (Persian)
“Study the effective parameters on dynamic response of fibre composites due to transverse impact”, 1^st International Conference on Aerospace & Aeronautics, Sharif University of Technology, Tehran, 2000, (Persian)
“Stress analysis of composite as well as metallic telescopic towers, 1^st Seminar on Radio & TV Towers, I.R.I.B., Tehran, 1999, (Persian)
“Dynamic analysis of thick composite laminated plates subjected to transverse impact by layer-wise theory”, 3^rd International Conference of ISME, University of Iran Science & Technology, Tehran, 1998, (Persian)
“Package for designing and predicting blanking and punching dies”, 3^rd International Conference of ISME, University of Iran Science & Technology, Tehran, 1998, (Persian)
“Changing design of pocket slots in bottle washing machine (Meyer) for the beverage production line”, 3^rd International Conference of ISME, University of Iran Science & Technology, Tehran, 1998, (Persian)
“Study the effective parameters on machining of fibre composites, 4^th Conference on Manufacturing Engineering, Amir Kabir University of Technology, Tehran, 1998, (Persian)
“Theoretical and experimental analysis of automobile axle shell”, 5^th ISME Conference, Tabriz University, Tabriz, 1997, (Persian)
“Dynamic response of fibre reinforced composite plates subjected to distributed transverse impact loads”, MEET ‘N’ 93, Joint ASCE, ASME, SES, Virginia, USA, 1993
“Analysis of the dynamic response of large orthotropic elastic plates to transverse impact”, International Conference on Engineering Applications of Mechanics, Sharif University of Technology, Iran, 1992
“Analysis of the dynamic response of large orthotropic elastic plates to transverse impact”, 36^th Congress of Indian Society of Theoretical & Applied Mechanics, I.I.T., India, 1991

K.N. Toosi University of Technology
Pardis St. , Molla-Sadra Avenue, Vanak. Sq. , Tehran, Iran
Tell: (+98 21) 8867 4841-8 Fax: (+98 21) 8867 7274
P.O Box: 19395-1999 Postal Code: 19991 43344

Website: www.kntu.ac.ir

Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

S. Mohammad Reza Khalili

books

Journal Papers

(Q1) 74/189 = 39% + (Q2) 36/189 = 19% Total = 58%

Reviewed Conference Papers