books

articles

Journal Papers

• Dehghani S., Sayyaadi H., and Pourali O., " Equilibrium conversion and reaction analysis in sulfur-iodine thermochemical hydrogen production cycle", The Canadian Journal of Chemical Engineering, 2015, 93, 708-726.
• Meratizaman M., Monadizadeh S., Pourali O., and Amidpour M., "High efficient-low emission power production from low BTU gas extracted from heavy fuel oil gasification, introduction of IGCC-SOFC process", Journal of Natural Gas Science and Engineering, 2015, 23, 1-15.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Production of phenolic compounds from rice bran biomass under subcritical water conditions”, Chemical Engineering Journal, 2010, 160, 259-266. 
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Simultaneous rice bran oil stabilization and extraction using sub-critical water medium”, Journal of Food Engineering, 2009, 95, 510-516.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Sub-critical water treatment of rice bran to produce valuable materials”, Food Chemistry, 2009, 115, 1-7.
• Pourali, O., Amidpour, M., and Rashtchian, D., “Time decomposition in batch process integration”, Chemical Engineering and Processing, 2006, 45, 14-21.
• Pourali, O., Attarchi, F., and Solgi, D., “Steam surface condenser design considerations”, Ultrapure Water, October 2005, 18-25.

Conference Papers

• Karbalaee Akbari, A., Gholinezhad, M., Pourali, O., Amidpour, M., “Thermodynamic and environmental analysis of heat recovery and water treatment from once through cooling water systems of the power plants in the Persian Gulf coastal areas”, 3rd Conference on Emerging Trends in Energy Conservation (ETEC 2014), Tehran, Iran, March 2014.
• Gholinezhad, M., Karbalaee Akbari, A., Pourali, O., Amidpour, M., “Technical feasibility and environmental impact of heat and water recovery from HRSGs (Heat Recovery Steam Generators) blowdown water using a recovery system”, 3rd Conference on Emerging Trends in Energy Conservation (ETEC 2014), Tehran, Iran, March 2014.
• Gholinezhad, M., Karbalaee Akbari, A., Pourali, O., Amidpour, M., “Thermodynamic and environmental analysis of heat and water recovery from HRSGs (Heat Recovery Steam Generators) blowdown water for space heating and water treatment”, 3rd Conference on Emerging Trends in Energy Conservation (ETEC 2014), Tehran, Iran, March 2014.
• Riazi, F., Pourali, O., Amidpour, M., “Solar energy application to supply hot water in the city of Ahwaz and quantitative estimation of its impact on decreasing greenhouse gaseous emission by Retscreen software”, 3rd Conference on Emerging Trends in Energy Conservation (ETEC 2014), Tehran, Iran, March 2014.  
• Mosayeb Nezhad, M., Azami, S., Taheri, M., Zamani, J., Pourali, O., “Design and fabrication of a valveless pulsejet engine”, 21st Annual International Conference on Mechanical Engineering, Tehran, Iran, May 2013.
• Golchoobian, H., Taheri, M., Amidpour, M., Pourali, O., “Theoretical and experimental study of a novel film evaporation cooling system”, 11th International Conference on Sustainable Energy Technologies (SET-2012), Vancouver, Canada, September 2012.
• Golchoobian, H., Behbahaninia, A., Amidpour, M., Pourali, O., “Dynamic exergy analysis of a solar ejector refrigeration system with hot water storage tank”, 11th International Conference on Sustainable Energy Technologies (SET-2012), Vancouver, Canada, September 2012.
• Golchoobian, H., Behbahaninia, A., Amidpour, M., Pourali, O., “Modeling and exergy analysis of an ejector refrigeration cycle”, The 3rd International Conferenec on Heating, Ventilating and Air Conditioning, Tehran, Iran, June 2011.
• Merati, M., Amidpour, M., Pourali, O., "Different scenarios of using the hybrid car in Iran”, World Renewable Energy Congress, Linköping, Sweden, May 2011.
• Mahinpey, N., Daneshvar Hosseini, S., Pourali, O., Salak Asghari, F., “Production of phenolic compounds from litchi fruit pericarp under subcritical water conditions”, 60th Canadian Chemical Engineering Conference, Saskatchewan, Canada, October 2010.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Application of subcritical water treatment for edible oil production from rice bran biomass”, 25th International Conference on Solid Waste Technology and Management, Philadelphia, USA, March 2010.
• Salak Asghari, F., Pourali, O., and Yoshida, H., “Application of sub-critical water treatment for production of phenolic compounds from rice bran biomass”, World Congress on Engineering & Computer Science 2009 (WCECS 09), San Francisco, USA, October 2009.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “A rapid and ecofriendly treatment technique for rice bran oil stabilization and extraction under sub-critical water condition”, World Congress on Engineering & Computer Science 2009 (WCECS 09), San Francisco, USA, October 2009.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “An environmentally friendly technique for production of phenolic compounds from rice bran using subcritical water hydrolysis”, Supergreen2009, Sendai, Japan, October 2009.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Conversion of rice bran Biomass into potential resources by application of sub-critical water technique”, The 4th International Symposium on Material Cycling Engineering, Osaka, Japan, March 2009.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Rice bran oil stabilization using subcritical water treatment”, The 2nd International Symposium on Applications of Supercritical Fluid in Green Chemistry and Material Science (SFC2), Kumamoto, Japan, June 2008.
• Pourali, O., Salak Asghari, F., and Yoshida, H., “Sub-critical water treatment of rice bran for production of value-added chemicals”, The 3rd International Symposium on Material Cycling Engineering, Osaka, Japan, March 2008.
• Furukawa, F., Pourali, O., Salak Asghari, F., and Yoshida, H., “Sub-critical water conversion of bulb and skin of onion into potential resources”, The 3rd International Symposium on Material Cycling Engineering, Osaka, Japan, March 2008.
• Amidpour, M., Pourali, O., and Rashtchian, D., “Energy and time scheduling in batch process integration”, 6th World Congress of Chemical Engineering, Melbourne, Australia, September 2001.
• Amidpour, M., Pourali, O., and Rashtchian, D., “Energy optimization in batch processes”, 4th International Chemical Engineering Congress, Shiraz, Iran, April 2000.
• Pourali, O., and Amidpour, M., “Energy saving by time combinations in batch process”, 4th National Chemical Engineering Congress, Tehran, Iran, March 1999.

Faculty of Mechanical Eng. of K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)

Tell: (+98 21) 8867 4841-8   Fax: (+98 21) 8867 7274

Website: www.kntu.ac.ir

Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )