jamal Zamani

Faculty of Mechanical Engineering
K. N. Toosi University of Technology
P. O. Box: 19395-1999
Tehran, Iran

Tell: (+98 21) 8406 3236
Fax: (+98 21) 8867 7274

Email: zamani@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

JOURNAL PAPERS (Those Published in English):

1. P.Pasbakhsh , J. Zamani, A. shokuhfar , " The effect of various reinforcements on the Ablation, thermal And microstructural properties of phenolic matrix composite ",  Journal Of  Key  Engineering  Materials, Volume 334 - 335
2. Zamani, Ghamsari , " Theoretical and experimental analysis of plastic response of isotropic circular plates subjected to underwater explosion loading ", Materialwissenschaft und Werkstofftechnik Journal , Vol. 39, No 2, 171-176,  2008
3. Zamani, ,Fakhri ,Ghamsari , " Experimental Analysis of the folding force in thin wall extruded cells under quasi-static in-plane loading ", Materialwissenschaft und Werkstofftechnik Journal , Vol. 39, No 2, 176-182, 2008,
4. J. Z. Ashani, S. M. Bagheri , " Explosive scarf welding of aluminum to copper plates and their interface properties ", International Journal of Materialwissenschaft und Werkstofftechnik   0933-5137   , No 40, Issue 09. P 655-719 , 2009
5. J. Z. Ashani, S. M. Bagheri , " A New Approach To Predict of Mechanical Properties At The Interface of Aluminum /Copper  Explosive Cladding by Explosive Scarf Welding", Iranian Journal of Materials Science & Engineering ISSN 1735-0808 , Vol. 6, Number 4, Autumn 2009
6. V. Hadavi, J. Zamani, A. Mozaffari, “Theoretical Calculation of the Maximum Radial Deformation of a Cylindrical Shell under Explosive Forming by a New Energy Approach”, The Journal of Mechanical Engineering Science, Part C.  Vol. 226,  Issue 3, 2012, 576-584
7. V. Hadavi, J. Zamani, “Theoretical, Experimental and Numerical (FEM) Investigation on the Behavior of Tubular Shells under Internal Blast Loading” the Journal of Mechanical Engineering Science, Part C.  , Vol. 7,  Issue 226, 2012, 1683-1692
8. M. Borbor, J. Zamani, M. Shriat, S. Jalili, M. Jafari,” The analytical solution of the buckling of composite truncated conical shells under Dynamic Loading” The Journal of Mechanical Science Technology, Vol.26, Issue 9, 2013, 2783-2791
9. K.H. Safari , J. Zamani , Fernando Ferreira and Rui Guedes " Constitutive modeling of polycarbonate during high strain rate deformation"  The Journal of Polymer Engineering and Science  , Vol. 53,  Issue 4, 2014, 752-761
10. J. Zamani , M.h.Hemati, R. Morsaluie,” An experimental comparison on dimensional accuracy of wax patterns of gas turbine blades produced by rapid tooling “ , Arabian Journal For Science And Engineering, Vol. X,  Issue X, 2014, Under Publication
11. Ehsan Etemadi, Jamal Zamani, Mohamad Vahab Mosavi,” High Strain Rate and Plastic Deformation Response of FCC Metals by Finite Element Method” , International Journal of Advances in Mechanical Engineering (AME), 2014, 1-10
12. Ehsan Etemadi, Jamal Zamani, Alessandro Francesconi, Mohammad V. Mousavi, Cinzia Giacomuzzo, “A new set-up to investigate plastic deformation of OFHC copper in high strain rate loading “ , The Journal of Modern Applied Science, Vol. 8,  Issue 2, 2014, 94-106
13. Sina Jalili, Jamal Zamani, M. Shariyat, N. Jalili, M.A.B. Ajdari, M. Jafari, “Experimental and numerical investigation of composite conical shells’ stability subjected to dynamic loading” The journal of Structural Engineering and Mechanics, Vol. 49,  Issue 5, 2014, 555-568

CONFERANCE PAPERS (Those Presented in English):

1. J. Zamani, P.Pasbakhsh –" The effect of heat flux on the ablation and micro structural properties of phenolic matrix composites “Sixth International Conference On Composite Science & Technology ICCST/6 - 22 - 24 January 2007 , Durban, South Africa
2. P.Pasbakhsh, J. Zamani " Experimental analysis of ablative phenolic matrix composites, Fabricated with carbon & glass , zirconia as reinforcements ", Second International Conference on recent Advances in Composite Materials , February 20-23, 2007, Banaras Hindu University Institute of Technology – 21005, INDIA
3. J. Zamani ,S.V. Hosseini- "Experimental and numerical analysis of energy absorption On thin-walled extruded square tubes under compressive  Out of plane loading"- 9th Conference on Deformation and Fracture of Composites , April 2007- Sheffield , UK
4. S.M.R. Khalili, J. Zamani ,M.Abbasi, S.A. Meshkat -"Effect of Strain Rate & Temperature on Mechanical of Glass Fiber – Reinforced metal Laminates an Experimental study"- Proceedings of COMP07 : 6th International Symposium on Advanced Composites, May, 2007- Greece
5. J. Zamani ,S.M.R. Khalili ،K.Safari ," Theoretical & Experimental Analysis of Plastic Response of  Isotropic  Plates under blast  Loading" - 3rd International Conference on Diffusion in Solids and Liquids, DSL-2007 , July 2007- PORTUGAL
6. J. Zamani , S.V. Hosseini ,"Energy Absorption consideration of thin-walled Extruded Square Tubes by Experimental and Numerical Methods" - 3rd International Conference on Diffusion in Solids and Liquids, DSL-2007 , July 2007- PORTUGAL
7. J. Zamani ,R.Zamani , A.Fakhri- "Experimental folding Analysis of circular cylindrical tubes under in-plane loading" - 3rd International Conference on Diffusion in Solids and Liquids, DSL-2007 , July 2007- PORTUGAL
8. J. Zamani ,A.shokuhfar,P.Pasbakhsh-"The Effect of Various Reinforcements on The Ablation, Thermal and Microstructural Properties of Phenolic Matrix Composites"-3rd International Conference on Diffusion in Solids and Liquids, DSL-2007 , July 2007- PORTUGAL
9. A.K.Ghamsari, J. Zamani , V. Hadavi,  A.Sheikhi, H.M.Alshariati –" Plastic response of thin plates under high strain rate loading" , Tehran International Congress on Manufacturing Engineering (TICME2007) December 10-13, 2007, Tehran, Iran
10.    A.K.Ghamsari, J. Zamani ,A. Mozaffari, A.Zamiri , " Dynamic to Static collapse pressure ratio of circular plates under blast loading" -(TICME2007)  Tehran International Congress on Manufacturing Engineering, December 10-13, 2007, Tehran, Iran
11. H.Baghayeri, J. Zamani ,F.Shirazi, "Design and manufacturing of a new 3D-Printing machine based on piezoelectric head technology" - Tehran International Congress on Manufacturing Engineering (TICME2007) December 10-13, 2007, Tehran, Iran
12. J. Zamani, M. H. Benvidi, M. Aghaei "Analytical Investigation of Cylindrical Shell with Truncated Cone under Internal Pressure Load " 2nd International Conference on advanced Computational Engineering & Experimentation , ACE-X2008  14-15 July, 2008 Barcelona
13. J. Zamani, M. Aghaei, M. H. Benvidi " Prediction of static internal pressure load for plastic collapse of truncated cone " 2nd International Conference on advanced Computational Engineering & Experimentation , ACE-X2008  14-15 July, 2008 Barcelona
14. J. Zamani, M. Daemi, M. Kamrani, A. K. Ghamsari " Numerical and Experimental analysis of fully clamped thin plates subjected to air-blast " 2nd International Conference on advanced Computational Engineering & Experimentation , ACE-X2008  14-15 July, 2008 Barcelona
15. Omid AliSalehi , J Zamani " Investigation on Ablating Behaviour of Carbon / Phenolic (C/P) Composites, Prepared with Different ives by Plasma and Oxyacetylene flame" 4th International Conference on Diffusion in Solid and Liquids, DSL-9-11 July 2008 Barcelona
16. Omid AliSalehi, J. Zamani, " Manufacturing of carbon fabric/phenolic    composites with autoclave method ", 7th International Conference On Composite Scienc & Technology, ICCST/7 , January 20-22, 2009 – Sharjah, United Arab Emirates 
17. Omid AliSalehi, J. Zamani, " Ablation characteristics of carbon fabric/phenolic composites in the presence of different additives", 7th International Conference On Composite Science & Technology, ICCST/7, January 20-22, 2009 – Sharjah, United Arab Emirates
18.  Reza Mosaluie, J. Zamani, M.Frotan, Hamid Ebrahimi, " An experimental examination of rapid prototyping and rapid tooling Technologies in production of gas turbine blades wax patterns", Third International Conference On Modelling, Simulation & Applied  Optimization, ICMSAO’09, January 20-22, 2009, Sharjah, United Arab Emirates
19.  J.  Zamani , M. Heshmati, " Numerical Simulation and Experimental Investigation of EFP Jet against Steel Target ", 5th International Conference on Diffusion in Solid and Liquids, DSL-24-26 June 2009, Rome, ITALY
20.  J.  Zamani , M. Heshmati, , H. Rokhy, " Numerical Simulation of Formation and  Penetration of the Shaped Charge Jet", 5th International Conference on Diffusion in Solid and Liquids, DSL-24-26 June 2009, Rome, ITALY
21. R. Hosseini,  J. Zamani, V. Hadavi, "  Experimental Analysis of the Behaviour of Thin Walled Shells under Internal Pressure Loading with Different Strain Rates ",WASET, World Academy of Science, Engineering and Technology, Bangkok, Thailand, December, 2009, Volume 60 , ISSN: 2070-3724, Page 569
22.  K.H. Safari.,  J. Zamani, " Constitutive Model for High Strain Rate Deformation of Amorphous Polymers " , 5h  International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2011, Algarve, Portugal
23. K.H. Safari., J. Zamani, “A Finite-Element Analysis of Polymers in Split Hopkinson Pressure Bar to Investigate Wave Propagation and Dispersion”, 16th International Conference in Composite Structures, ICCS16, Porto, Portugal.
24.  J. Zamani , S. Jafarian, V. Hadavi , M.Abbasi, " Experimental investigation of strain rate dependent behavior of aluminum cylindrical shells under internal pressure loading ranging from statically to explosive ", The 11th Iranian Aerospace Society Conference February 21-23, 2012 at Shahid Sattari Aeronautical University of Science and Technology AERO2012
25. Jamal Zamani ,  Ehsan Etemadi, Mohammad Vahhab Mousavi ," Numerical Analysis of OFHC Copper Behavior under High Strain Rate Loading " 21th Annual International Conference on Mechanical Engineering-ISME 2013, 7-9 May, 2013, School of Mechanical Eng., K.N.Toosi University, Tehran, Iran      
26. M. MosayebNezhad, S. Azami, M. Taheri, J. Zamani, O. Pourali ," Design and Fabrication of a Valve less Pulsejet Engine " 21th Annual International Conference on Mechanical Engineering-ISME2013 7-9 May, 2013, School of Mechanical Eng., K.N.Toosi University, Tehran, Iran

Faculty of Mechanical Eng. of K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)

Tell: (+98 21) 8867 4841-8   Fax: (+98 21) 8867 7274

Website: www.kntu.ac.ir

Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )