Dr. Farhang Honarvar

Professor at K.N.Toosi University of Technology

Dr. Farhang Honarvar

Phone: (+98 21) 84063247

Faculty of Mechanical Engineering, K. N. Toosi University of Technology, P.O. Box 19395-1999

E-mail: honarvar@[kntu.ac.ir]

Tehran, Iran

Fax: (+98 21) 88674748

Administration Contact: Mechanical Engineering Office

Phone: (+98 21) 88674747

Dr. Honarvar Home:

Seyed Morteza Tabatabaeipour

Associate Member

Name:
Seyed Morteza Tabatabaeipour
Email:
s.m.tabatabaeipour@gmail.com
Department:
Mechanical Engineering
Admission:
2017

Thesis Title:

Ultrasonic Inspection of Materials using Local Defect Resonance (LDR)

Research Interests:

Nondestructive Testing and Evaluation, Linear and non-linear Ultrasonic Testing, Nonlinear Elastic Wave Spectroscopy (NEWS), Structural Health Monitoring, Micro-Damage Diagnostics, Damage Localisation and monitoring

Iman Mehdipour

Associate Member

Name:
Iman Mehdipour
Email:
iman_mehdipour@yahoo.com
Department:
Mechanical Engineering
Admission:
2017

Thesis Title:

Development of wide spectrum energy harvesting devices

Research Interests:

Smart Materials and Structures,Vibration and Pressure Energy Harvesting,Piezoelectric Materials,Nonlinear Vibration,Mass Sensors

Ali Habibpour Ledari

PhD Candidate

Name:
Ali Habibpour Ledari
Email:
habibledari@yahoo.com
Department:
Mechanical Engineering
Admission:
2011

Thesis Title:

Spacial Localization of Defects by Ultrasonic TOFD (Time-of-Flight Diffraction) Technique

Research Interests:

Nondestructive evaluation (TOFD Technique)

Adel Sedaghati

PhD Candidate

Name:
Adel Sedaghati
Email:
adel.sedaghati@yahoo.com
Department:
Mechanical Engineering
Admission:
2012

Thesis Title:

-

Research Interests:

NDE, Lamb wave, FSW/FSP, Warm forming, Neural network, Optimization

S.H. Hosseini

PhD Candidate

Name:
Sayed Hossein Hosseini
Email:
hhosseinif@mail.kntu.ac.ir
Department:
Mechanical Engineering
Admission:
2012

Thesis Title:

FE Simulation of Ultrasonic Wave Propagation in Austenitic Steel Welds

Research Interests:

Ultrasonic Inspection of Welds, Wave Propagation in Anisotropic Media, Finite Element Analysis

Salman Shamsaei

PhD Candidate

Name:
Salman Shamsaei
Email:
s.shamsaei@hotmail.com
Department:
Mechanical Engineering
Admission:
2013

Thesis Title:

Numerical and experimental study of the effects of ultrasonic properties of the laser beam generated in the laser ultrasonic erosion regime

Research Interests:

Ultrasonics, Laser ultrasonic

Zahra Abbasi

PhD Candidate

Name:
Zahra Abbasi
Email:
abbasi_mecheng@yahoo.com
Department:
Mechanical Engineering
Admission:
2015

Thesis Title:

ultrasonics

Research Interests:

Ultrasonic NDE- Finite Element Method- Elasticity-Measurement

ramin shabani

PhD Candidate

Name:
Ramin Shabani
Email:
rshabani@mail.kntu.ac.ir
Department:
Mechanical Engineering
Admission:
2015

Thesis Title:

Ultrasonic wave velocity measurement in the presence of temperature gradients

Research Interests:

Wave propagation, finite element method

Nader Ariaeifar

MSc Student

Name:
Nader Ariaeifar
Email:
nader.ariaeifar@gmail.com
Department:
Mechanical Engineering
Admission:
2015

Thesis Title:

Design and construction of ultrasonic probes with variable frequency band

Research Interests:

Ultrasonic Nondestructive Evaluation, Ultrasonic probes

Mortaza Eshraghi

MSc Student

Name:
Mortaza Eshraghi
Email:
Eshraghimortaza@yahoo.com
Department:
Mechanical Engineering
Admission:
2015

Thesis Title:

Measurement of the Sediment Layer Thickness in Oil and Gas Pipes by Ultrasonic Method

Research Interests:

Nondestructive Evaluation, Guided waves, Signal Analysis

Hamid Yazdi Pasand

MSc Student

Name:
Hamid Yazdi Pasand
Email:
hyazdi89@gmail.com
Department:
Mechanical Engineering
Admission:
2015

Thesis Title:

Generation of pure head waves and using them for ultrasonic testing of materials

Research Interests:

NDE

Mojtaba Asgari

MSc Student

Name:
Mojtaba Asgari
Email:
mojtaba.asgari1991@gmail.com
Department:
Mechanical Engineering
Admission:
2015

Thesis Title:

Ultrasonic testing of oil and gas pipes using guided waves

Research Interests:

NDT, CAD-CAM & CAE, Process Planning, Quality control

hamidreza karimian

MSc Student

Name:
Hamidreza Karimian
Email:
hamidreza.karimian.1994@gmail.com
Department:
Mechanical Engineering
Admission:
2016

Thesis Title:

Finite element modeling of Lamb wave propagation in composite laminates containing a delamination

Research Interests:

Nondestructive evaluation, FEM, Pizoelectric, Lamb Wave, Composites

sayed reza hashemi

MSc Student

Name:
Sayed Reza Hashemi
Email:
hashemi.sreza@gmail.com
Department:
Mechanical Engineering
Admission:
2016

Thesis Title:

Simulation Ultrasonic TOFD (Time-of-Flight Diffraction) Technique

Research Interests:

Nondestructive evaluation (TOFD Technique)

sayed ali ghorayshi

MSc Student

Name:
Sayed Ali Ghorayshi
Email:
ali22.kntu@gmail.com
Department:
Mechanical Engineering
Admission:
2016

Thesis Title:

Ultrasonic wave velocity measurement in the presence of temperature gradients

Research Interests:

Wave propagation, finite element method

mojtaba kachkooli

MSc Student

Name:
Mojtaba Kachkooli
Email:
kachkooli@yahoo.com
Department:
Mechanical Engineering
Admission:
2016

Thesis Title:

Ultrasonic wave velocity measurement in the presence of temperature gradients

Research Interests:

Wave propagation, finite element method

ehsan naderian

MSc Student

Name:
Ehsan Naderian
Email:
ehsan_n_89@yahoo.com
Department:
Mechanical Engineering
Admission:
2016

Thesis Title:

ultrasonic transdermal drug delivery

Research Interests:

ultrasonic transdermal drug delivery

PhD Students

1. Mohammdreza Kari, K. N. Toosi University of Technology, (Supervisor)

Thesis title: "Measurement of the elastic properties of fibers embedded in an isotropic material by inversion of acoustic scattering data," February 2015.

2. Amin Yaghootian, K. N. Toosi University of Technology, (Supervisor)

Thesis title: "Enhancement of Ultrasonic Time-of-Flight Diffraction (ToFD) Technique by Time Varying Deconvolution," September 2012.

3. Mohammad Ali Saadat Nia, University Of Tehran, (Adviser)

Thesis title: "An Investigation into Acoustic Behavior of Reaction Woods by Ultrasonic Technique (Case Study: Poplar & Spruce Species)," January 2011.

4. Jalil Jamali, University of Tehran, (Co-Superviser)

Thesis title: "Acoustic Wave Scattering from cylindrical shell that made of functionally graded materials", December 2010.

5. Sina Sodagar, K. N. Toosi University of Technology, (Supervisor)

Thesis title: "Multiple Scattering of Ultrasonic Waves from Fiber-Reinforced Composite Materials," September 2010.

6. V. Mohammadi, Islamic Azad University, (Adviser)

Thesis title: "Analysis of Mechanical Behavior and Dimensional Stability plain knitted Fabric in Relaxation by Ultrasonic Method," September 2005.

MSc Students

1. HamidvReza Ebrahimzadeh, K. N. Toosi University of Technology

Thesis title: "Propagation of Lamb Waves in Transversely Isotropic Plates," September 2011.

2. Mohammad Hamidnia, K. N. Toosi University of Technology

Thesis title: "Characterization of Mechanical Properties of Case Hardened Steels by Ultrasonic Non Destructive Testing," Augest 2011.

3. Somaye Khorasani, K. N. Toosi University of Technology

Thesis title: "Simulation of Ultrasonic Testing Time of Flight Diffraction (ToFD) Technique by Finite Element Method," February 2011.

4. Mehdi Damband Khameneh, K. N. Toosi University of Technology

Thesis title: "Modeling of Ultrasonic Signals Received by Angle Beam Rectangular Transducers," September 2010.

5. Ramin Mehdizad, K. N. Toosi University of Technology

Thesis title: "Measurement of Case Depth of Hardened Steels by Ultrasonic Methods," September 2010.

6. Seyyed Javid Mirahmadi, K. N. Toosi University of Technology

Thesis title: "Simulation of Ultrasonic Lamb Wave Propagation by Finite Element Method," September 2009.

7. Seyed Morteza Tabatabaeipour, K. N. Toosi University of Technology

Thesis title: "Ultrasonic Testing of Austenitic Welds," August 2009.

8. Mehdi Hajian, K. N. Toosi University of Technology

Thesis title: "Ultrasonic Signal Processing using Iterative Estimation Algorithms," August 2009.

9. Mohammad-Hadi Mollaverdi, K. N. Toosi University of Technology

Thesis title: "Modelling of Scattered Waves from Cylindrical Cavities in Ultrasonic Non-destructive Testing," February 2009.

10. Seyed Mohammad-Hassan Rohani, K. N. Toosi University of Technology

Thesis title: "Defect Detection in Plates Using Lamb Waves," February 2009

11. Saeid Zanganeh, K. N. Toosi University of Technology

Thesis title: "Assessing physical and Structural Properties of Metals Using Ultrasonic Waves," September 2008.

12. Mehdi Zeighami, K. N. Toosi University of Technology

Thesis title: "Design and Construction of an Ultrasonic C-Scan System for Inspection of Adhesive Joints," September 2008.

13. Ehsan Dehghan, K. N. Toosi University of Technology

Thesis title: "Design and Construction of the Ultrasonic Part of an Automatic Inspection System," September 2008.

14. Hamed Ahangar-Darabi, K. N. Toosi University of Technology

Thesis title: "On-Line Monitoring of Molten Plastic in Injection Molding by Ultrasonic Waves," August 2008.

15. Mehdi Khoshkho, University of Tehran

Thesis title: "Improving Ultrasonic NDT Signals Using Iterative Wiener Filter," April 2007.

16. Morteza Dashtizadeh, K. N. Toosi University of Technology

Thesis title: Uncertainty analysis of crack depth measurement with ultrasonic time-of-flight diffraction technique, November 2006.

17. Abbas Moghannizadeh, K. N. Toosi University of Technology

Thesis title: "An Investigation into Spot Weld Parameters," November 2006.

18. Naemeh Safari, K. N. Toosi University of Technology

Thesis title: "Scattering of an Obliquely Incident Plane Wave from Isotropic and Transversely Isotropic Cylindrical Shells," November 2005.

19. Vahid Mahboobipour, K. N. Toosi University of Technology

Thesis title: "Construction of B-Scan Image from Ultrasonic Test," October 2005.

20. Hamed Tavalla, K. N. Toosi University of Technology

Thesis title: "Processing of Ultrasonic Signals for Detection of Spot Weld defects," September 2005.

21. Vahid Haghighi, K. N. Toosi University of Technology

Thesis title: "Processing of B-scan imagoes obtained from ultrasonic time-of-flight diffraction (TOFD) testing of plate butt welds," August 2005.

22. Sayyed Amin Taymoori, K. N. Toosi University of Technology

Thesis title: "Comparison of Nondestructive Ultrasonic Method and Destructive Method in Inspection of Spot Welds of PEUGEOT 405 Body," March 2005.

23. Mohsen Ghorbani Salkhord, K. N. Toosi University of Technology

Thesis title: "Investigation and Analysis of The Sources of Error in Ultrasonic Testing of Materials with Application to TOFD Technique," Jan 2005.

24. Amir Ansari, K. N. Toosi University of Technology

Thesis title: Using synthetic aperture focusing technique (SAFT) and signal processing for improving the quality of B-scan images in ultrasonic testing, January 2005.

25. Ahmad Mahdavi-Tabatabaee, K. N. Toosi University of Technology

Thesis title: "Application of Signal Processing Techniques in Measuring of Crack Length by Ultrasonic Time of Flight Diffration (TOFD) Technique," July 2004.

26. Esmaeil Enjilela, Azad University

Thesis title: "Ultrasonic nondestructive testing of transversely isotropic cylinders Extension of the mathematical model," 2004.

27. Mohammad-Hossein Kianmehr, K. N. Toosi University of Technology

Thesis title: "Nondestructive Evaluation of Aircraft Composite Structures," October 2002.

28. Mohammad-Reza Kamali, K. N. Toosi University of Technology

Thesis title: "Design and Manufacturing of a Semi Automatic System for Nondestructive Testing of Complex Shape Parts and F.R.P Composites NDT Using Ultrasonic Method," September 2002.

29. Shahryar Dilfanian, K. N. Toosi University of Technology

Thesis title: "Study of the capabilities of the time-of-flight diffraction (ToFD) technique in ultrasonic nondestructive inspection, June 2002

30. Hamed Hamedi, K. N. Toosi University of Technology

Thesis title: "Design and Manufacturing of the Mechanism of Probe Holder and Selection of Appropriate Driving System in Automated Ultrasonic Inspection of Pipeline Grith Weld," April 2002.

31. Ahmad-Reza Ahmadi-Khabaz, K. N. Toosi University of Technology

Thesis title: "Design and construction of a magnetic particle testing machine," June 2001.

32. Abbas Mohammadi, K. N. Toosi University of Technology

Thesis title: "Ultrasonic nondestructive testing of spot welds," April 2001.

33. Farhad Kheirolahzadeh, K. N. Toosi University of Technology

Thesis title: "Using nondestructive testing for quality control of friction and stellite welds on automobile valves," February 2001.

34. Mohammad-Reza Jafari, K. N. Toosi University of Technology

Thesis title: "Investigating the internal displacement field of submerged cylinders at circumferential resonance modes," February 2001.

35. Seyed Abbas Mirnezami, K. N. Toosi University of Technology

Thesis title: "Propagation of elastic waves in transversely isotropic cylinders," 2001.

36. Abdolreza Rahimian, K. N. Toosi University of Technology

Thesis title: "Quality control of thermal insulation by ultrasonic testing," July 1999.

BSc Students

1. Mohamamd Javad Hadi Dehcordy, K. N. Toosi University of Technology

Thesis title: "Mechanical Design of an Automatic Ultrasonic Corrosion Measurement System," Summer 2011.