English

1. I. Mehdipour and F. Honarvar, “Optimum Polarization Boundary in Low Frequency Piezoelectric Pressure Energy Harvesting with a Clamped Circular Plate, Applied Mathematical Modeling (submitted).

2. M. Rafinezhad-Masouleh and F. Honarvar, “Investigation of the performance of a piezoelectric ultrasonic transducer by finite element modeling,” Russian Journal of Nondestructive Testing (submitted).

3. S. H. Hosseini-Farrash and F. Honarvar, “Numerical modeling of the propagation of ultrasonic waves in AISI 316L welds made by SMAW and GTAW processes,” Journal of Theoretical and Applied Vibration and Acoustics (submitted).

4. S. A. Ghorashi, F. Honarvar and S. M. Tabatabaeipour, “Automated extraction of local defect resonance using the principal component analysis in lock-in ultrasonic vibrothermography,” Infrared Physics and Technology, 105, 103204, 2020.

5. A. Sedaghati, F. Honarvar and A. N. Sinclair, "Investigation of the scattering of Lamb waves from a generalized circular cavity by using Poisson/Mindlin plate theories and numerical simulation." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2019, 0954406219871073.

6. P. Fathi-Haftshejani, and F. Honarvar. "Nondestructive Evaluation of Clad Rods by Inversion of Acoustic Scattering Data." Journal of Nondestructive Evaluation, 38(3), 67- 2019.

7. A. Sedaghati, F. Honarvar and A. N. Sinclair, “Lamb wave-based experimental and numerical studies for detection and sizing of corrosion damages in metallic plates,” Part C: Journal of Mechanical Engineering Science, 233 (6) 2107-2120, Mar. 2019.

8. A. Habibpour-Ledari, F. Honarvar, “Three-Dimensional Characterization of Defects by Ultrasonic Time-of-Flight Diffraction (ToFD) Technique,” Journal of Nondestructive Evaluation, 37 (14), 2018.

9. A. Gholami, F. Honarvar, H. Abrishami-Moghadam, “Modeling the ultrasonic testing echoes by a combination of particle swarm optimization and Levenberg–Marquardt algorithms,” Measurement Science and Technology, 065001, 14pp, 2017.

10. D. Souri, F. Honarvar, and Z. Esmaeili Tahan, “Characterization of semiconducting mixed electronic-ionic TeO2eV2O5eAg2O glasses by employing ultrasonic measurements and Vicker's microhardness,” Journal of Alloys and Compounds, 699, 601-610, 2017.

11. M. H. Hojjati and F. Honarvar, “An Investigation of the Relationship between Subsurface and Head waves by Finite Element Modeling,” Nondestructive Testing and Evaluation, 31(4), 319-330, 2016.

12. A. Taheri and F. Honarvar, “Multiple Scattering of an Acoustic Wave from a Network of Cylindrical Rods Encased in a Solid Viscoelastic Medium,” Ultrasonics, 64(1), 69-76, 2016.

13. M. Kari and F. Honarvar, “Characterization of immersed transversely isotropic rods by inversion of acoustic scattering data,” Journal of the Acoustical Society of America, 138(4), 2024-2033, Oct. 2015.

14. A. Gholami, F. Honarvar and H. A. Moghaddam, “Application of Model-Based Estimation to Time-Delay Estimation of Ultrasonic Testing Signals,” Journal of Theoretical and Applied Vibration and Acoustics, 1(1), 10-20, 2015.

15. M. Kari and F. Honarvar, “Characterization of a cylindrical rod by inversion of acoustic scattering data,” Ultrasonics, 54(6), 1559-67, Aug 2014.

16. M. Kari and F. Honarvar, “Nondestructive Characterization of Materials by Inversion of Acoustic Scattering Data,” Inverse Problems in Science & Engineering, 22(5), 814-831, 2014.

17. F. Honarvar, F. Salehi, A. Mokhtari, A. N. Sinclair, “Ultrasonic Monitoring of Erosion/Corrosion Thinning Rates in Industrial Piping Systems” Ultrasonics, 53(7), 1251-1258, Sep. 2013.

18. A. Mokhtari and F. Honarvar, “New Indices for Plotting C-Scan Images Obtained from Ultrasonic Testing of Adhesive Joints,” Materials Evaluation, 71(9), 1081-1089, Sep. 2013.

19. F. Salehi, F. Honarvar, and A. N. Sinclair, “Monitoring of Pipe-Wall Thickness and its Thinning Rate by Ultrasonic Technique,” International Journal of Design and Manufacturing Technology, 5(4), 1-6, Sep. 2012.

20. B. Shakibi, F. Honarvar, M.D.C. Moles c, J. Caldwell, A. N. Sinclair, “Resolution enhancement of ultrasonic defect signals for crack sizing,” NDT&E International, 52, 37-50, November 2012.

21. A. Yaghootian, F. Honarvar, M. Zeighami, and A. N. Sinclair, “Enhancement of Ultrasonic Testing Signals by Piece–Wise Deconvolution,” Materials Evaluation, 70(5), 570-578, May 2012.

22. M. Hamidnia and F. Honarvar, “Measurement of Elastic Properties of AISI 52100 Alloy Steel by Ultrasonic Nondestructive Methods,” Journal of Mechanics of Materials and Structures, 7(10), 951-961, Dec. 2012.

23. M. Aghaie-Khafri, F. Honarvar, and S. Zangeneh, “Characterization of AISI 301 stainless steel using ultrasonic attenuation measurements,” Nondestructive Evaluation, 31(3), 191-196, Sep. 2012.

24. S. J. Mirahmadi, and F. Honarvar, “Application of signal processing techniques to ultrasonic testing of plates by S0 Lamb wave mode,” NDT & E International, 44(1), pp.131-137, Jan. 2011.

25. J. Jamali, M. H. Naei, F. Honarvar, and M. Rajabi, "Acoustic Scattering from Functionally Graded Cylindrical Shells," Archives of Mechanics, 63(1), 25-56, 2011.

26. J. Jamali, M. H. Naei, F. Honarvar, and M. Rajabi, "Acoustic Scattering and Radiation Force Function Experienced by Functionally Graded Cylindrical Shells," Journal of Mechanics, 27(2), 227-243, June 2011. (in Persian).

27. M. Saadat-Nia, L. Brancheriau, P. Gallet, A. A. Enayati, K. Purtahmasi, and F. Honarvar, “Ultrasonic Wave Parameter Changes During Propagation through Poplar and Spruce Reaction Wood,” BioResources, 6(2), 1172-1185, 2011.

28. F. Honarvar, E. Enjilela, and A. N. Sinclair, “Correlation between helical surface waves and guided modes of an infinite immersed elastic cylinder,” Ultrasonics, 51, 238-244, February 2011.

29. S. Sodagar, F. Honarvar, and A. N. Sinclair, “Multiple scattering of an obliquely incident plane acoustic wave from a grating of immersed cylindrical shells,” Applied Acoustics, 72, 1–10, 2011.

30. M. Hajian and F. Honarvar, “Reflectivity Estimation using Expectation Maximization Algorithm for Ultrasonic Nondestructive Evaluation of Adhesive Bonds,” Materials Evaluation, 69(2), 208-219, February 2011.

31. Mehdi Nikkhah, Farhang Honarvar, and Ehsan Dehghan, “Elastodynamic solution for plane-strain response of functionally graded thick hollow cylinders by analytical method,” Applied Mathematics and Mechanics, 32(1), 1–14, 2011.

32. M. Aghaie-Khafri, F. Honarvar, and S. Zangeneh, “Correlation between ultrasonic velocity and solutionizing time in Rene 80 superalloy,” Materials Science and Technology, 27(9), 2011.

33. S. Sodagar, F. Honarvar, A. Yaghootian, and A. N. Sinclair, “An alternative approach for measuring the scattered acoustic pressure field of immersed single and multiple cylinders,” Acoustical Physics, 57(3), 411-419, 2011.

34. S. M. Tabatabaeipour and F. Honarvar, “A Comparative Evaluation of Ultrasonic Testing of AISI 316L Welds Made by Shielded Metal Arc Welding and Gas Tungsten Arc Welding Processes,” Journal of Materials Processing Technology, 210, 1043–1050, August 2010.

35. A.N. Sinclair, J. Fortin, B. Shakibi, F. Honarvar, M. Jastrzebski, and M.D.C. Moles, “Enhancement of ultrasonic images for sizing of defects by time-of-flight diffraction,” NDT&E International, 43, 258-264, April 2010.

36. S. Sodagar and F. Honarvar, "Improvements to the Mathematical Model of Acoustic Wave Scattering from Transversely Isotropic Cylinders," Scientia Iranica, 17(3), 157-166, June 2010.

37. Mehdi Zeighami, Farhang Honarvar, "New Approaches for Evaluation of Adhesive Joints by Ultrasonic C-Scan Imaging Technique," Materials Evaluation, 67(8), 945-954, August 2009.

38. F. Honarvar, E. Enjilela, and A. N. Sinclair, "Asymmetric and axisymmetric vibrations of finite transversely isotropic circular cylinders," Acoustical Physics, 55, 708-714, 2009.

39. F. Honarvar, E. Enjilela, and A. N. Sinclair, “An Alternative Method for Plotting Dispersion Curves,” Ultrasonics, 49, 15–18, 2009.

40. A. A. Jeddi, V. Mohammadi, H. Rahimzadeh, and F. Honarvar, “Knitted Fabric Relaxation by Ultrasound and its Characterization with Yarn-Pullout Force,” Fibers and Polymers, Vol. 8, No. 4, pp. 408-413, 2007.

41. F. Honarvar, E. Enjilela, and A. N. Sinclair, “Guided Ultrasonic Waves in Composite Cylinders,” Mechanics of Composite Materials, Vol. 43, No. 3, 2007.

42. F. Honarvar, E. Enjilela, A.N. Sinclair, and S. A. Mirnezami, “Wave Propagation in transversely isotropic cylinders”, International Journal of Solids and Structures, 44, 5236–5246, 2007.

43. F. Honarvar, H. Sheikhzadeh, M. Moles, and A.N. Sinclair, “Improving the Time-Resolution and Signal-to-Noise Ratio of Ultrasonic NDE Signals.” Ultrasonics, 41, 755-763, 2004.

44. Y. Fan, B. Tysoe, J. Sim, K. Mirkhani, A.N. Sinclair , F. Honarvar, Harry Sildva, Alexander Szecket, Roy Hardwick, “Nondestructive Evaluation of Explosively Welded Clad Rods by Resonance Acoustic Spectroscopy.” Ultrasonics, 41, 369-375, 2003.

45. F. Honarvar, Y. Fan, and A.N. Sinclair, “Scattering of Acoustic Waves from Transversely Isotropic Cylinders,” Journal of the Acoustical Society of America, 114: 1-3, July 2003.

46. Y. Fan, F. Honarvar, A.N. Sinclair and M. R. Jafari, “Circumferential Resonance Modes of Solid Elastic Cylinders Excited by Obliquely Incident Acoustic Waves.” Journal of the Acoustical Society of America, 113: 1-12, January 2003.

47. A. N. Sinclair, Y. Fan and F. Honarvar, “Ultrasonic Characterization of Continuously Cast Rod by Resonance Acoustic Spectroscopy.” Nondestructive Testing and Evaluation, Vol. 19, Nos. 12, pp. 1528, March-June 2003.

48. Y. Fan, A. N. Sinclair and F. Honarvar, “Scattering of a plane acoustic wave from a transversely isotropic cylinder encased in a solid elastic medium.” Journal of the Acoustical Society of America, 106:1229-1236, September 1999.

49. F. Honarvar and A.N. Sinclair, “Response to: Representation of the Displacement in Terms of the Scalar Functions for Use in Transversely Isotropic Materials.” Journal of the Acoustical Society of America, 104:3677, 1998.

50. F. Honarvar and A. N. Sinclair, “Nondestructive Evaluation of Cylindrical components by Resonance Acoustic Spectroscopy.” Ultrasonics, 36:845-854, 1998.

51. Farhang Honarvar and Hugh R. Martin, “New Statistical Moments for Diagnostics of Rolling Element Bearings.” Journal of Manufacturing Science and Engineering, Transactions of the American Society of Mechanical Engineers, 119:425-432, August 1997.

52. F. Honarvar and A.N. Sinclair, “Scattering of an Obliquely Incident Plane Wave from a Circular Clad Rod.” Journal of the Acoustical Society of America, 102:1-8, July 1997.

53. F. Honarvar and A. N. Sinclair, “Acoustic Wave Scattering from Transversely Isotropic Cylinders.” Journal of the Acoustical Society of America, 100:57–63, July 1996.

54. Hugh R. Martin and Farhang Honarvar. “Application of statistical moments to bearing failure detection.” Applied Acoustics, 44:67–77, 1995.

Persian

1. M. Asgari, F. Honarvar and M. Tabatabaipour, “Inspection of straight seam welded pipes by ultrasonic guided waves,” Amirkabir Journal of Mechanical Engineering, 2019 (accepted)

2. S. A. Ghorashi, F. Honarvar and M. Tabatabaeipour, “Finite element simulation of vibro-thermography nondestructive testing technique,” Iranian Journal of Manufacturing Engineering, 6(7), 24-33, December 2019. (in Persian).

3. P. Salehi-Firoozabadie and Farhang Honarvar, “Ultrasonic thickness measurement of the internal insulation layer of metal surfaces by using signal processing schemes,” Journal of Mechanical Engineering of University of Tabriz, 49(88), 193-202, Fall 2019 (in Persian).

4. A. Habibpour-Ledari, F. Honarvar, “An Algorithm for 3D Defect Positioning in the Case of Coplanar Transducers in Ultrasonic Time-of-Flight Diffraction Technique, Modares Mechanical Engineering 18(5), 154-162, 2018 (in Persian).

5. A. Sedaghati, F. Honarvar and A. N. Sinclair, “Study of Lamb wave scattering from a cylindrical hole by using finite element modeling and experimental measurements,” Modares Mechanical Engineering Journal, 16(12), 395-404, February 2017 (in Persian).

6. M. Nasiri Babolani, F. Honarvar, “Experimental Investigation of the Effect of the Backing Material on the Performance of an Ultrasonic Probe,” Mechanical and Aerospace Engineering Journal, 14(2), 19-26 Summer 2018 (in Persian).

7. A. Sedaghati, F. Honarvar, “Lamb Waves and their Applications in Nondestructive Evaluation,” Sound and Vibration, 5(9), 35-48, 2016.

8. S. Khorasani, F. Honarvar, “Finite Element Modeling of Ultrasonic Time-of-Flight Diffreaction Technique,” Journal of Modeling in Engineering, 13(41), 13-26, Summer 2015 (in Persian).

9. R. Shabani and F. Honarvar, “Variation of Longitudinal Ultrasonic Wave Velocity in the Presence of a Thermal Gradient; Part 1: 2D Theoretical and Numerical Models, Modares Mechanical Engineering Journal, 3(16), 305-310, June 2016 (in Persian).

10. R. Shabani and F. Honarvar, “Variation of Longitudinal Ultrasonic Wave Velocity in the Presence of a Thermal Gradient; Part 2: Experimental Study and Uncertainty Analysis, Modares Mechanical Engineering Journal, 3(16), 10-16, July 2016 (in Persian).

11. H. Mollaverdi and F. Honarvar, “Identification of the Resonance Modes Excited by Ultrasonic Scattering from Cylindrical Defects of Isotropic Solid Materials,” Mechanical and Aerospace Engineering Journal, 11(1), 41-50 Spring 2015 (in Persian).

12. H. Ziaiefar, M. Amiryan, M. Ghodsi, F. Honarvar and Y. Hojjat, “Ultrasonic Damage Classification in Pipes and Plates using Wavelet Transform and SVM,” Modares Mechanical Engineering Journal, 5(15), 41-48, August 2015 (in Persian).

13. A. Taheri and F. Honarvar, “Multiple Scattering of an Acoustic Wave from Fibers Encased in a Solid Viscoelastic Medium,” Modares Mechanical Engineering Journal, 14(15), 423-430, February 2015 (in Persian).

14. M. Ayani, F. Honarvar and R. Shabani, “Variations of Longitudinal and Transverse Ultrasonic Wave Velocities with Changes in Temperature,” Modares Mechanical Engineering Journal, accepted, 16(2), 199-205, 2016.

15. A. Arhamnamazi and F. Honarvar, “Improvement of Ultrasonic Wave Velocity Measurements in Steel Components by Using the SAGE Algorithm,” Modares Mechanical Engineering Journal, 14(15), 241-248, February 2015 (in Persian).

16. A. Gholami, F. Honarvar, and H. Abrishami Moghaddam, “Optimal parameter estimation of ultrasonic signals using evolutionary algorithms,” Modares Mechanical Engineering Journal, 15(1), 236-244, March 2015(in Persian).

17. P. Daryabor, M. Farzin, and F. Honarvar, “Calculating the Lamb wave modes in an aluminum sheet bonded to a composite layer with FEM and experiment,” Modares Mechanical Engineering Journal, 13(1), 95-106, Mar. 2013. (in Persian).

18. A. Yaghootian and F. Honarvar, “Modeling of Ultrasonic ToFD Signals by Nonparaxial Multi-Gaussian Beam (NMGB) Technique,” Journal of the Iranian Society of Mechanical Engineers, 2(24), 92-108, Fall 2012. (in Persian)

19. H. Mollaverdi and F. Honarvar, “Identification of the Resonance Modes Excited by Ultrasonic Scattering from Cylindrical Defects of Isotropic Solid Materials,” Mechanical and Aerospace Engineering Journal, 11(1), 41-50 Spring 2015 (in Persian).

20. A. Moghanizadeh, F. Honarvar, M. Ghoreishi, R. Ghajar, "An Investigation into the Parameters Affecting the Quality of Resistance Spot Welds," Mechanical and Aerospace Engineering Journal, 7(2), 1-10, 2012 (in Persian).

21. M. Hamidnia, F. Honarvar, and H. Khorsand, “Accurate measurement of mechanical properties of tempered microstructures of AISI D6 alloy steel by ultrasonic nondestructive method,” The Modares Journal of Mechanical Engineering, 12(4), 48-58, Oct. 2012. (in Persian).

22. F. Honarvar and S. M. H. Rohani, “Nondestructive evaluation of adhesive joints by Lamb waves,” Sharif Journal of Science and Technology, 27-3(2), 113-119, 2012 (in Persian). V. Mahboobipour, F. Honarvar, and A. Ansari, "Design and Construction of an Ultrasonic Scanner for Obtaining B-Scan Images from Industrial Parts," IUST International Journal of Engineering Science, 19(10), 147-155, 2009. (in Persian).

English

1. F. Honarvar, M. R. Kari and A. Varvani-Farahani, “Characterization of a fiber reinforced composite through use of ultrasonic scattering techniques,” The 6th International Conference on Composites, Characterization, Fabrication and Application (CCFA-6), Iran University of Science & Technology, Tehran, Iran, Dec. 11-12, 2018.

2. M. Asgari, F. Honarvar, M. Eshraghi, and M. Tabatabaeipour, “Guided wave-based inspection technique for evaluating the structural integrity of Bitumen-coated pipelines,” 5th Iranian International NDT Conference (IRNDT2018), Olympic Hotel, Tehran, Iran, Nov. 4-5, 2018.

3. M. Asgari, F. Honarvar, M. Eshraghi, and M. Tabatabaeipour, “Detection and Discrimination of Symmetric and Asymmetric Defects by Using Ultrasonic Guided Waves,” 5th Iranian International NDT Conference (IRNDT2018), Olympic Hotel, Tehran, Iran, Nov. 4-5, 2018.

4. Ali Habibpour-Ledari and Farhang Honarvar, “3D Positioning of Defects by Ultrasonic Time-of-Flight Diffraction (ToFD),” The Bi-Annual International Conference on Experimental Mechanics and Dynamics (XMech2014), Tehran, Iran, February 13-14, 2018.

5. Adel Sedaghai and Farhang Honarvar, “Generation of a Specific Lamb Wave Mode for Structural Health Monitoring of Plate-Like Structures,” June 13-17, 2017, London, UK.

6. Adel Sedaghai, Farhang Honarvar and Anthony N. Sinclair, “Extraction of Complex Wavenumbers of Lamb Waves,” 4th Iranian International NDT Conference, Feb. 26-27, 2017, Tehran, Iran.

7. Mostafa Rafienezhad-Masouleh and Farhang Honarvar, “Finite Element Modeling of Ultrasonic Transducers,” 4th Iranian International NDT Conference, Feb. 26-27, 2017, Tehran, Iran.

8. Farhang Honarvar, Adel Sedaghati and Anthony N. Sinclair, “Sizing of Through-Thickness Circular Holes in Plate Structures by Ultrasonic Lamb Wave Testing,” 19th World Conference on Non-Destructive Testing, Munich, Germany, June 13-17, 2016.

9. Farhang Honarvar and Ali Habibpour-Ledari, “Three-Dimensional Characterization of Defects by Ultrasonic Time-Of-Flight Diffraction (TOFD) Technique,” 19th World Conference on Non-Destructive Testing, Munich, Germany, 13-17, June 2016.

10. Mojtaba Ghodsi, Hamidreza Ziaiefar, Milad Amiryan, Farhang Honarvar, Yousef Hojjat, Mehdi Mahmmodi, Amur Al-Yahmadi , Issam Bahadur, “Lamb wave feature extraction using Discrete Wavelet Transformation and Principal Component Analysis,” Prodeedings of SPIE, vol. 98041F, 2016.

11. Sara Maghami, Farhang Honarvar, Hamed Bouzary, “Simulation of Ultrasonic Guided Waves in Pipes by Finite Element Method,” 3rd Iranian International NDT Conference, Feb. 21-22, Tehran, Iran.

12. Hamed Bouzary, Farhang Honarvar and Sara Maghami, “Inspection of Pipes by Non-Axisymmetric Ultrasonic Guided Waves,” 3rd Iranian International NDT Conference, Feb. 21-22, Tehran, Iran.

13. Ali Gholami, Sirous Saharkhiz, Masoud Samadi and Farhang Honarvar, “Ultrasonic Flaw Detection Systems for Testing Rails of Iranian Railways (RAI),” 3rd Iranian International NDT Conference, Feb. 21-22, Tehran, Iran.

14. Mohammadreza Kari and Farhang Honarvar, “Measurement of Elastic Constants of Transversely Isotropic Cold-Drawn Rods by Acoustic Wave Scat-tering,” 4th International Conference on Acoustics and Vibration, Tehran, Iran, 10-11 Dec. 2014.

15. A. Gholami, F. Honarvar, and H. Abrishami Moghaddam, “Time Delay Estimation (TDE) of Ultrasonic Echoes Using Model-Based Estimation,” 4th International Conference on Acoustics and Vibration, Tehran, Iran, 10-11 Dec. 2014.

16. Farhang Honarvar, Mohammad Iran-Nejad, Ali Gholami and Anthony N. Sinclair, “Estimation of Uncertainty in Ultrasonic Thickness Gauging and Improvement of Measurements by Signal Processing,” NDT in Canada 2014 Conference, Toronto, Canada, June 16-19, 2014.

17. Farhang Honarvar and Mohammadreza Kari, “Characterization of Embedded Transversely Isotropic Fibres by Inversion of Acoustic Scattering Data,” 3rd International Conference on Acoustics and Vibration, Tehran, Iran, 25-26 Dec. 2013.

18. Farhang Honarvar and Mohammadreza Kari, “Characterization of Immersed Transversely Isotropic Cylinders by Inversion of Acoustic Scattering Data,” The Bi-Annual International Conference on Experimental Mechanics and Dynamics (XMech2014), Tehran, Iran, February 18-19, 2014.

19. Mohammd R. Chehrezad, Farhang Honarvar, “Nondestructive evaluation of hardened steel plates by ultrasonic backscatter technique,” The Bi-Annual International Conference on Experimental Mechanics and Dynamics (XMech2014), Tehran, Iran, February 18-19, 2014.

20. H. Mansourinia, F. Honarvar, N. Asleshahrivar, and V. Haghighi, “Detection of Internal Defects in Engineering Components by Laser Ultrasonics,” The Bi-Annual International Conference on Experimental Mechanics and Dynamics (XMech2014), Tehran, Iran, February 18-19, 2014.

21. N. Asleshahrivar, F. Honarvar, H. Mansourinia, and V. Haghighi, “Measurement of Internal Defects by Laser Ultrasonics,” Asia Pacific Conference on Non-Destructive Testing (APCNDT2013), Mumbai, India, November 18-22, 2013.

22. Kobra Kalvandi, Sina Sodagar, Farhang Honarvar, “Ultrasonic wave scattering from a single nano-fiber composite,” 21st Annual International Conference on Mechanical Engineering-ISME2013, Tehran, Iran, May 7-9, 2013.

23. F. Honarvar , R. Baqeri , R. Mehdizad, “Case Depth Profile Measurement of Hardened Components by Ultrasonic Backscattering Technique,” 18th World Conference of Nondestructive Testing (WCNDT), Durban, South Africa, 16-20 April, 2012.

24. F. Honarvar, F. Salehi, V. Safavi, A.N. Sinclair, “Estimation of Erosion/Corrosion Rate in Pipe Walls by Cross-Correlation Technique,” Review of Progress in Quantitative Nondestructive Evaluation, AIP Conf. Proc. 1430, 697-704, 2012.

25. F. Honarvar , M. D. Khameneh , A. Yaghootian and M. Zeighami, “Modeling of Ultrasonic Signals Received by a Focused Circular Transducerfrom a Side-Drilled Hole,” International Symposium on Nondestructive Testing of Materials and Structures, Istanbul, Turkey, May 15-18, 2011.

26. A. N. Sinclair, V. Safavi, and F. Honarvar, “Ultrasonic Measurement of Erosion/Corrosion Rates in Industrial Piping Systems,” Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Vol. 30, pp 1333-1340, 2011.

27. F. Honarvar, and S. M. H. Rohani, “Nondestructive Evaluation of Adhesively Bonded Aluminum Plates by Lamb Waves,” The 3rd International CANDU In-Service Inspection and NDT in Canada Conference, Toronto, Canada, 14-17 June 2010.

28. A. N. Sinclair, V. Safavi-Ardebili, F. Honarvar, “Enhanced Measurement of Erosion/ Corrosion Rates in CANDU Feeder Tubes,” The 3rd International CANDU In-Service Inspection and NDT in Canada Conference, Toronto, Canada, 14-17 June 2010.

29. B. Shakibi, A. N. Sinclair, F. Honarvar, “Resolution Enhancement of Ultrasonic Images,” The 3rd International CANDU In-Service Inspection and NDT in Canada Conference, Toronto, Canada, June 14-17, 2010.

30. B. Shakibi, A. N. Sinclair, F. Honarvar, “Resolution Enhancement of Ultrasonic Images,” 19th Research Annual Symposium and Spring Conference of the American Society for Nondestructive Testing (ASNT), Williamsburg, VA, U.S.A., March 22-26, 2010.

31. Farhang Honarvar, and Somayeh Khorasani, “Simulation of Time-of-Flight Diffraction (ToFD) Technique by Finite Element Method,” Online-Workshop of Simulation in NDT, e-Journal of Nondestructive Testing (eJNDT), Sep. 2010.

32. F. Honarvar, R. Mehdizad, M. Zeighami, “Case-Depth Measurement of Induction-Hardened Alloy Steel AISI 4140 by Ultrasonic Technique,” ASNT Fall Conference and Quality Testing Show, Houston, U.S.A., 15-19 Nov. 2010.

33. S. M. Tabatabeipour and Farhang Honarvar, “Application of Signal Processing Techniques to Ultrasonic ToFD Testing of Austenitic Welds,” The 10th European Conference on NDT (ECNDT2010), Moscow, Russia, 7-11 June 2010.

34. Sina Sodagar, Farhang Honarvar, and Anthony N. Sinclair, “Multiple scattering of obliquely Incident acoustic waves from a grating of cylindrical shells,” The 16th International Conference on Sound and Vibration (ICSV16), Krakow, 5-9 July, 2009.

35. Amin Yaghootian, Farhang Honarvar, and Mehdi Zeighami, “Modeling the Radiation Field of Normal-Beam Ultrasonic Transducers by Multi-Gaussian Beam Technique,” 5th Middle East Nondestructive Testing Conference and Exhibition, November 8-11, 2009.

36. Mehdi Hajian, Farhang Honarvar, and Hamid Abrishami-Moghaddam, “Reflectivity Estimation using Expectation Maximization Algorithm in Ultrasonic Nondestructive Evaluation,” 16th International Workshop on Systems, Signals and Image Processing, June 18-10, 2009, Calkida, Greece.

37. S. J. Mirahmadi, F. Honarvar, “Numerical Study of the Interaction of Fundamental Lamb Wave Modes with an Abrupt Reduction of Plate Thickness”, Canadian Congress of Applied Mechanics (CANCAM '09), Halifax, Nova Scotia, Canada, May 31 to June 4, 2009.

38. S. M. Tabatabaeipour and F. Honarvar, "Ultrasonic Testing of Austenitic Welds and its Dependency on the Welding Process," Malaysian International NDT Conference and Exhibition (MINDTCE 09), Kuala Lumpur, Malaysia, July 20-21, 2009.

39. M. Zeighami and F. Honarvar, “Nondestructive Evaluation of Adhesive Joints by C-Scan Ultrasonic Testing,” Malaysian International NDT Conference and Exhibition (MINDTCE 09), Kuala Lumpur, Malaysia, July 20-21, 2009.

40. Edward Ginzel, Farhang Honarvar, and Amin Yaghootian, “A Study of Time-of-Flight Diffraction Technique Using Photoelastic Visualization,” 2nd International Conference on Technical Inspection and NDT (TINDT2008), Tehran, Iran, Oct. 21-22, 2008.

41. Farhang Honarvar and Mehdi Zeighami, “Application of signal processing techniques to case depth measurements by ultrasonic method,” 17th World Conference on Nondestructive Testing, 25-28 Oct. 2008, Shanghai, China.

42. Farhang Honarvar and Amin Yaghootian, “Reference wavelets for deconvolution of ultrasonic time-of-flight diffraction (ToFD) signals,” 17th World Conference on Nondestructive Testing, 25-28 Oct. 2008, Shanghai, China.

43. Hadi Rezghi-Maleki, Akba Afaghai-Khatibi, and Farhang Honarvar, “On the nondestructive evaluation of composite structures by liquid-crystal thermography,” 17th World Conference on Nondestructive Testing, 25-28 Oct. 2008, Shanghai, China.

44. Mehdi Hajian, Farhang Honarvar, and Hamid Abrishami-Moghaddam, “Improving the Ultrasonic Nondestructive Evaluation Signals by Iterative Wiener Filtering,” 38th International Conference and NDT Exposition of the Czech Society for NDT (Defektoskopie 2008), Brno, Czech Republic, 4-6 Nov. 2008.

45. Sina Sodagar, Farhang Honarvar, and Anthony N. Sinclair, “Multiple scattering of acoustic waves from two transversely isotropic cylinders,” Acoustics '08, Paris, France, 30 June – 4 July, 2008.

46. J. Jamali, F. Honarvar, and M.H. Naei, "Acoustic wave scattering from infinite cylinders made from functionally graded materials," Acoustics '08, Paris, France, 30 June – 4 July, 2008.

47. Farhang Honarvar, Mehdi Khoshkho, and Mohammad Mahjoob-Jahromi, “Enhancement of ultrasonic nondestructive testing signals by iterative Wiener filtering,” 4th Middle East Nondestructive Testing Conference, Bahrain, 2-5 December 2007.

48. Farhang Honarvar and Amin Yaghootian, “Angle-Dependent Deconvolution of Ultrasonic Time-of-Flight Diffraction (ToFD) Signals,” 19th International Congress on Acoustics, Madrid, Spain, 2-7 September 2007 (Invited Paper).

49. Sina Sodagar, Farhang Honarvar, and Anthony N. Sinclair, “Resonance Modes of Type I and Type II Transversely Isotropic Clad Rods,” 19th International Congress on Acoustics, Madrid, Spain, 2-7 September 2007 (Invited Paper).

50. Farhang Honarvar and Esmaeil Enjilela, “Correlation between helical surface waves and guided modes of an immersed elastic cylinder,” International Congress on Ultrasonics, Vienna, Austria, April 9-13, 2007.

51. Sina Sodagar, Farhang Honarvar and Anthony N. Sinclair, “Ultrasonic wave scattering from a single fiber-matrix composite,” International Congress on Ultrasonics, Vienna, Austria, April 9-13, 2007.

52. Farhang Honarvar and Morteza Dashtizadeh, “Application of Uncertainty Analysis to Ultrasonic Time of Flight Diffraction Technique,” International Congress on Ultrasonics, Vienna, Austria, April 9-13, 2007.

53. Mehdi Khoshkho, Farhang Honarvar, and Mohammad Mahjoob-Jahromi, “A Deconvolution technique for ultrasonic nondestructive testing signals using iterative Wiener filtering, “International Congress on Ultrasonics, Vienna, Austria, April 9-13, 2007.

54. Sina Sodagar, Farhang Honarvar and Anthony N. Sinclair, “Scattering of an obliquely incident plane wave from an immersed transversely isotropic rod covered by an isotropic cladding,” 151st Meeting of the Acoustical Society of America, June 2006.

55. Farhang Honarvar, Esmaeil Enjilela and Anthony N. Sinclair, “Obtaining Dispersion Curves by a Novel Numerical Method,” Thirteenth International Congress on Sound and Vibration (ICSV13), Vienna, Austria, July 2-6, 2006.

56. Esmaeil Enjilela, Farhang Honarvar and Anthony N. Sinclair, “Dispersion of Ultrasonic Waves in Transversely Isotropic Cylinders,” Thirteenth International Congress on Sound and Vibration (ICSV13), Vienna, Austria, July 2-6, 2006.

57. Sina Sodagar, Farhang Honarvar and Anthony N. Sinclair, “Acoustic Wave Scattering from an Encased Clad Rod,” Thirteenth International Congress on Sound and Vibration (ICSV13), Vienna, Austria, July 2-6, 2006.

58. Sina Sodagar, Farhang Honarvar and Anthony N. Sinclair, “Acoustic Wave Scattering from Immersed Transversely Isotropic Cylinders Covered by Isotropic Cladding,” Thirteenth International Congress on Sound and Vibration (ICSV13), Vienna, Austria, July 2-6, 2006.

59. Naemeh Safari, Farhang Honarvar, Majid Bazargan, Esmaeil Enjilela, “Longitudinal Guided Waves in Transversely Isotropic Circular Cylindrical Shells,” Thirteenth International Congress on Sound and Vibration (ICSV13), Vienna, Austria, July 2-6, 2006.

60. F. Honarvar, S.A. Taymoori, H. Tavalla, A. Mohammadi, and F. Sadafi, “Ultrasonic Inspection of Spot Welds on the Body of a Peugeot 405 Automobile,” Tehran International Congress on Manufacturing Engineering, Tehran, Iran, Dec. 12-15, 2005.

61. A.N. Sinclair, J. Fortin, F. Honarvar, M. Jastrzebski, and M.D.C. Moles, “Enhancement of Ultrasonic B-Scan Images for Sizing of Defects by Time-of- flight Diffraction,” Tehran International Congress on Manufacturing Engineering, Tehran, Iran, Dec. 12-15, 2005.

62. F. Honarvar and S.A.M. Tabatabai, “Improvement of Time-of-Flight Diffraction (TOFD) Measurements by Signal Processing,” Corrosion Management Asia Conference, Kuala Lumpur, Malaysia, Sep. 21 - 22, 2005.

63. Farhang Honarvar, Asmail Engilela and Anthony N. Sinclair; “Flexural Guided Wave Propagation in Composite Rods,” Twelfth International Congress on Sound and Vibration (ICSV12), Lisbon, Portugal, July 11-14, 2005.

64. Sina Sodagar, Farhang Honarvar, and Anthony N. Sinclair, “Acoustic Wave Scattering From an Immersed Transversely Isotropic Rod Covered by an Isotropic Cladding,” Twelfth International Congress on Sound and Vibration (ICSV12), Lisbon, Portugal, July 11-14, 2005.

65. Asmail Engilela, Farhang Honarvar and Anthony N. Sinclair; “Vibrations of Finite Transversely Isotropic Circular Cylinders,” Eleventh International Congress on Sound and Vibration (ICSV11), St. Petersburg, Russia, 5-8 July 2004.

66. F. Honarvar, A. Engilela, S.R. Mirnezami, and A.N. Sinclair; “Wave Propagation in Transversely Isotropic Circular Cylinders,” IEEE International Ultrasonics, Ferroelectrics, and Frequency Control Joint 50th Anniversary Conference, Palais des Congres, Montreal, Canada, 23-27 August, 2004.

67. F. Honarvar, S.A.M. Tabatabai, T. Dusatko and A.N. Sinclair; “A New Signal Processing Technique for Enhancement of Ultrasonic Testing Signals,” 16th World Conference on Nondestructive Testing, Palais des Congres, Montreal, Canada, August 30 – September 3, 2004.

68. M. Jastrzebski, T. Dusatko, J. Fortin, F. Farzbod, A.N. Sinclair, and F. Honarvar; “Enhancement of Synthetic Aperture Focusing Technique (SAFT) by Advanced Signal Processing,” 16th World Conference on Nondestructive Testing, Palais des Congres, Montreal, Canada, August 30 – September 3, 2004.

69. F. Honarvar, T. Dusatko, Y. Fan, F. Farzbod, M. Moles and A.N. Sinclair; “A Novel Signal Processing Technique for Enhancement of Time-of-Flight Diffraction (TOFD) Signals,” Proceedings of the International Chemical and Petroleum Industry Inspection Technology (ICPIIT), Houston, Texas, USA, June 18-21, 2003.

70. F. Honarvar, Y. Fan and A.N. Sinclair, “Scattering of Obliquely Incident Acoustic Waves from Immersed Transversely Isotropic Cylinders,” Tenth International Congress on Sound and Vibration, Stockholm, Sweden, 7-10 July, 2003.

71. F. Honarvar and A.N. Sinclair, “Separation of Overlapping Echoes in Signals Obtained from Ultrasonic Testing of Materials,” Proceedings of the 7th International and 11th Annual Conference of the Iranian Society of Mechanical Engineers, Ferdowsi University, Mashad, Iran, May 13-15, 2003.

72. F. Honarvar, “Inspection of Plate Groove Welds by Ultrasonic Time-of-Flight Diffraction (TOFD) Technique,” 6th Iranian Welding and Inspection Conference (INWIC), Tehran, Iran, February 22-23, 2003.

73. F. Honarvar, S.A. Mirnezami and A. N. Sinclair, “Longitudinal Guided Wave Propagation in Composite Rods,” 8th International Congress on Sound and Vibration (ICSV8), Hong Kong, China, July 2-6, 2001.

74. F. Honarvar, M. R. Jafari, A. N. Sinclair and A. Shadaram, “Interior Displacement Field of Elastic Cylinders at Resonance Frequencies.” Proceedings of the 5th International and 9th Annual Conference of the Iranian Society of Mechanical Engineers, Guilan University, Rasht, Iran, May 27-29, 2001.

75. A. N. Sinclair, R. J. Shapoorabadi, F. Honarvar and Y. Fan, “Ultrasonic Characterization of Metals with Electromagentic Acoustic Transducers.” Proceedings of the 4th International and 8th Annual Conference of the Iranian Society of Mechanical Engineers, Sharif University of Technology, Tehran, Iran, May 16-19, 2000.

76. Y. Fan, A. N. Sinclair and F. Honarvar, “Nondestructive Evaluation of a Transversely Isotropic Cylinder Encased in a Solid Elastic Medium,” Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Montreal, Canada, July 1999.

77. F. Honarvar, A.N. Sinclair and Y. Fan, “Characterization of Elastic Materials by Resonance Acoustic Spectroscopy.” 137th Meeting of the Acoustical Society of America and 2nd Convention of the European Acoustics Association, Berlin, Germany, March 14-19, 1999.

78. F. Honarvar and A. N. Sinclair, “Nondestructive Evaluation of Copper-clad Aluminum Wires.” Regional Congress of the International Institute of Welding (IIW), Tehran, Iran, 1998.

79. F. Honarvar and Hugh R. Martin. “New statistical moments for diagnostics of rolling element bearings.” Journal of Manufacturing Science and Engineering, Trans. of ASME, to appear in August 1997. Also presented at CSNDT 30th Anniversary Conference, Niagara Falls, Ontario, Canada, May 15–18 1995.

80. F. Honarvar and Hugh R. Martin. “A statistical method for damage detection in hydraulic components.” Proceedings of the 1995 SAE International O®-Highway and Power Plant Congress and Exposition, Mecca, Milwaukee, Wisconsin, September 11–13 1995.

81. F. Honarvar and Anthony N. Sinclair. “Application of resonance acoustic spectroscopy to nondestructive evaluation of clad rods.” 133rd Meeting of the Acoustical Society of America, State College, Pennsylvania, USA, June 16–21 1997.

82. F. Honarvar and Anthony N. Sinclair. “Scattering of an obliquely incident wave by a transversely isotropic cylinder.” 131st Meeting of the Acoustical Society of America, Indianapolis, Indiana, USA, May 13–17 1996.

83. F. Honarvar, Anthony N. Sinclair, Michael R. Piggot, and M. V. Ravichandran. “Nondestructive evaluation of the bonding of fiber to matrix in a composite material.” In Proceedings of the 1st International Conference on Composite Materials and Energy. Canadian Association for Composite Structures and Materials, Montreal, Canada, May 8–10 1995.

84. F. Honarvar and Anthony N. Sinclair. “Acoustic wave scattering from infinite cylindrical clad rods.” Presented at the 129th Meeting of the Acoustical Society of America, Washington DC, USA, May 30 – June 3 1995.

85. Anthony N. Sinclair, F. Honarvar, and Michael R. Piggott. “Nondestructive evaluation of pull-out strength of reinforcing fibers.” In Proceedings of the 10th International Conference on Composite Materials (ICCM-10), Whistler, British Columbia, Canada, August 14–18 1995.


Persian

1. E. Naderian, F. Honarvar and H. Abrishami-Moghaddam, “Investigation of effective parameters in ultrasonic transient cavitation by using aluminum foil erosion method,” 9th International Conference on Acoustics and Vibration, Tehran, Iran, 21-22 Dec. 2019.

2. M. Eshraghi, F. Honarvar, M. Asgari, and M. Tabatabaeipour, “Assessment of the thickness of the deposit layer in plates using Lamb waves,” 5th Iranian International NDT Conference (IRNDT2018), Olympic Hotel, Tehran, Iran, Nov. 4-5, 2018.

3. M. Asgari, F. Honarvar, and M. Tabatabaeipour, “Assessment of Bitumen-coated pipelines by using the first longitudinal guided wave mode,” 5th Iranian International NDT Conference (IRNDT2018), Olympic Hotel, Tehran, Iran, Nov. 4-5, 2018.

4. Z. Abbasi and F. Honarvar, “Modeling of propagation of high-order mode cluster (HOMC) of Lamb waves in plates,” 5th Iranian International NDT Conference (IRNDT2018), Olympic Hotel, Tehran, Iran, Nov. 4-5, 2018.

5. N. Ariaeifar and F. Honarvar, “Design and simulation of a variable-bandwidth ultrasonic nondestructive testing probe, 15th annual and 4th International Conference on Manufacturing Engineering, Tehran, Iran, Oct. 24-25, 2018.

6. Mojtaba Asgari, Farhang Honarvar, and Seyed Morteza Tabatabaeipour, “Inspection of Gas Transmission Pipelines by Guided Ultrasonic Waves, 7th International Conferece on Acoustics and Vibration, Nov. 28-29, 2017, Tehran, Iran.

7. Behrad Ghazinouri and Farhang Honarvar, “Nondestructive Testing of Curved Hollow Sections by Using a Semi-Automatic Scanner,” 4th Iranian International NDT Conference, Feb. 26-27, 2017, Tehran, Iran.

8. Seyed Hossein Hosseini-Farrash and Farhang Honarvar, “Experimental and Finite Element Study of Propagation of Ultrasonic Waves in Austenitic Waves Prepared by SMAW and GTAW Processes,” 4th Iranian International NDT Conference, Feb. 26-27, 2017, Tehran, Iran.

9. Dariush Souri, Zahra Esmaeili-Tahan and Farhang Honarvar, “Investigation of the Mechanical Properties of Ag2O-TeO2 -V2O5 glasses by ultrasonic method,” The Annual Physics Conference of Iran, Mashhad, Iran, Aug. 24-27, 2015.

10. Ramin Shabani and Farhang Honarvar, “Analytical and Numerical Analysis of Variations of Ultrasonic Longitudinal Waves in the Presence of a Thermal Gradient,” 5th International Conference of Acoustics and Vibration, Tehran, Iran, Nov. 25-26, 2015.

11. Sara Maghami, Farhang Honarvar and Keivan Narooi, “Finite element simulation of ultrasonic guided waves in cylindrical structures,” 5th International Conference of Acoustics and Vibration, Tehran, Iran, Nov. 25-26, 2015.

12. Mostafa Rafienezhad-Masouleh, Farhang Honarvar, Milad Nasiri-Babolani, “Finite Element Analysis of Ultrasonic Transducers in Nondestructive Testing of Adhesive Bonding in Aluminum–Composite Pipes,” First International Conference on Composite Pipes, Vessels, and Tanks, Tehran, Iran, 28-29 January 2015.

13. Milad Nasiri-Babolani, Mostafa Rafienezhad-Masouleh, Farhang Honarvar, “Optimal Design of Ultrasonic Transducers for Nondestructive Evaluation of Composite Tanks,” First International Conference on Composite Pipes, Vessels, and Tanks, Tehran, Iran, 28-29 January 2015.

14. Mehran Sepehri-Khameneh, Farhang Honarvar, “Ultrasonic testing of adhesive joints by ultrasonic bubbler technique,” 3rd International Conference on Acoustics and Vibration, Tehran, Iran, 25-26 Dec. 2013.

15. Ali Taheri and Farhang Honarvar, “Comparison of multiple scattering of normally and obliquely incident ultrasonic waves from solid cylinders embedded in a viscoelastic matrix,” 3rd International Conference on Acoustics and Vibration, Tehran, Iran, 25-26 Dec. 2013.

16. S. Gheisari and F. Honarvar, “Displacement Field and Circumferential Resonance Modes of Homogeneous Isotropic Cylinders in Resonance Acoustic Scattering,” 21st Annual International Conference on Mechanical Engineering-ISME2013, Tehran, Iran, May 7-9, 2013.

17. A. Namazi and F. Honarvar, “Estimation of Wave Velocity in AISI 4140 Steel by Inverse Coherence Technique,” 2nd International Conference on Acoustics and Vibration, Tehran, Iran, 26-27 Dec. 2012.

18. H. R. Ebrahimzadeh, F. Honarvar, S. A. Arham-Namazi, “Inspection of Thin-Walled Pressure Vessels by Leaky Lamb Waves,” 12th Iranian Conference on Manufacturing Engineering, Tehran, Iran, Dec. 27-29, 2011.

19. M. Hamidnia and F. Honarvar, “Accurate Measurement of Elastic Properties of AISI 4140 Steel by Ultrasonic Testing,” 19th Annual Conference of the Iranian Society of Mechanical Engineers, Tehran, Iran, May 10-12, 2011.

20. A. Mokhtari and F. Honarvar, “Corrosion Measurement by Ultrasonic Technique,” 1st National NDT Conference, Tehran, Iran, 3-4 May, 2011.

21. R. Baqeri and F. Honarvar, “A review of techniques used for measuring the wall thickness of turbine blades,” 3rd Conference on Rotating Equipment, Tehran, Iran, Nov. 22-23, 2011.

22. R. Mehdizad, F. Honarvar, and M. Zeighami, “Ultrasonic measurement of case-depth in hardened steel specimens,” 10th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, Oct. 19-21, 2010.

23. S. Khorasani, F. Honarvar, “Simulation of time-of-flight diffraction (ToFD) technique by finite element method,” 10th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, Oct. 19-21, 2010.

24. H. R. Ebrahimzadeh, F. Honarvar, “ Flaw detection in pressurized tubes by ultrasonic Lamb waves,” 10th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, Oct. 19-21, 2010.

25. J. Mirahmadi and F. Honarvar, “Numerical and Experimental Study of the Interaction of Lamb Waves with Two Closely-Spaced Symmetrical Notches,” 18th Annual Conference of the Iranian Society of Mechanical Engineers, May 11-13, 2010.

26. H. Ahangar-Darabi, F. Honarvar, and E. Dehghan, “Comparing the ultrasonic probes and pressure gages in online monitoring of plastic molding,” 18th Annual Conference of the Iranian Society of Mechanical Engineers, May 11-13, 2010.

27. J. Mirahmadi and F. Honarvar, “Numerical and Experimental study of the interaction of the symmetric Lamb wave with asymmetrical notches,” The 10th Iranian Conference on Manufacturing Engineering (ICME2010), Babol, Iran, March 1-3, 2010.

28. S. J. Mirahmadi and F. Honarvar, "A Computer Algorithm for Inspection of Plate Butt-Welds," 9th Iranian Conference on Manufacturing Engineering, Birjand, Iran, March 3-5, 2009.

29. S. M. Tabatabaeipour and F. Honarvar, "Characterization of Austenitic Weld Grain Orientation for the Purpose of Ultrasonic Inspection," 9th Iranian Conference on Manufacturing Engineering, Birjand, Iran, March 3-5, 2009.

30. S. M. Tabatabaeipour and F. Honarvar, “Inspection of Austenitic Welds Using Ultrasonic Time-of-Flight Diffraction (ToFD) Method,” 2nd International Conference on Technical Inspection and NDT (TINDT2008), Tehran, Iran, Oct. 21-22, 2008.

31. Mehdi Zeighami and Farhang Honarvar, “Nondestructive Evaluation of Adhesive Joints by Ultrasonic Testing,” 2nd International Conference on Technical Inspection and NDT (TINDT2008), Tehran, Iran, Oct. 21-22, 2008.

32. Mehdi Zeighami and Farhang Honarvar, “Design and Construction of an Ultrasonic C-Scan System for Nondestructive Evaluation of Materials,” 2nd International Conference on Technical Inspection and NDT (TINDT2008), Tehran, Iran, Oct. 21-22, 2008.

33. Dehghan, E., and Honarvar, F.; “Design and Construction of an Ultrasonic Scanner for Inspection of Butt Welds in Steel Plates,” 2nd International Conference on Technical Inspection and NDT (TINDT2008), Tehran, Iran, Oct. 21-22, 2008.

34. Ehsan Dehghan and Farhang Honarvar, “Design of an automated ultrasonic testing system for inspection of pipeline girth welds,” 1st International Conference on Technical Inspection and Nondestructive Testing, Tehran, Iran, 23-24 Oct. 2007.

35. Amin Yaghootian and Farhang Honarvar, “Signal Processing of ultrasonic time-of-flight diffraction (ToFD) B-scan images by Wiener filtering and autoregressive spectral extrapolation,” 1st International Conference on Technical Inspection and Nondestructive Testing, Tehran, Iran, 23-24 Oct. 2007.

36. Farhang Honarvar and Vahid Haghighi, “Improvement of B-scan Images Obtained from Ultrasonic Time-of-Flight-Diffraction Measurements on Butt Welds,” Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, December 2007.

37. Farhang Honarvar and M. Dashtizadeh, “Design Stage Uncertainty Analysis of Ultrasonic Time-of-Flight Diffraction (ToFD) Technique in Measuring the Crack Through-Wall Size,” Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, December 2007.

38. Amin Yaghootian, Farhang Honarvar, and Majid Ghoreishi, “Comparison of Various Wavelets for Deconvolution of ToFD Signals,” Proceedings of the 15th Annual-International Conference of the Iranian Society of Mechanical Engineers, Tehran, Iran, May 15-17, 2007.

39. Morteza Dashtizadeh and Farhang Honarvar, “Application of Standard Uncertainty Analysis Technique in Measurement of Flaw Depth by Ultrasonic ToFD Method,” 8th Iranian National Conference on Welding and Inspection, Tehran, Iran, May 1-3, 2007.

40. Vahid Haghighi and Farhang Honarvar, “Design and Manufacture of a Scanner for Acquisition of B-scan Images from ToFD Measurements,” 8th Iranian National Conference on Welding and Inspection, Tehran, Iran, May 1-3, 2007.

41. Hadi Rezghi-Maleki, Akbar Afaghi-Khatibi, and Farhang Honarvar, “Comparison of Nondestructive Methods for Evaluation of Composite Structures,” The 6th Conference of the Iranian Aerospace Society, February 24-25, Tehran, Iran, 2007.

42. Abbas Moghanizadeh and Farhang Honarvar, “Quality Control of Spot Welds by Ultrasonic Methods,” 6th Conference of the Aerospace Society of Iran, K. N. Toosi University of Technology, Tehran, March 2007.

43. Amir Ansari, Farhang Honarvar, and Vahid Mahboobipour, “A New Method of Application of Synthetic Aperture Focusing Technique for the Improvement of Ultrasonic B-Scan Images,” Proceedings of the 10th International and 14th Annual Conference of the Iranian Society of Mechanical Engineers, Isfahan University of Technology, Isfahan, Iran, May 2006.

44. Farhang Honarvar, “Automatic Ultrasonic Testing of Pipeline Girth Welds,” First HSE and Third Technical Inspection Student Conference, University of Abadan Oil Industry, Abadan, Iran, Dec. 2006.

45. Naemeh Safari, Farhang Honarvar, Majid Bazargan, “Scattering of Plane Acoustic Waves from Type I and Type II Immersed Transversely Isotropic Shells,” Proceedings of the 10th International and 14th Annual Conference of the Iranian Society of Mechanical Engineers, Isfahan University of Technology, Isfahan, Iran, May 2006.

46. Naemeh Safari, Farhang Honarvar, “Scattering of a Plane Acoustic Wave from Viscoelastic Shells Immersed in Viscous Fluid,” Proceedings of the 10th International and 14th Annual Conference of the Iranian Society of Mechanical Engineers, Isfahan University of Technology, Isfahan, Iran, May 2006.

47. M.R. Kamali and F. Honarvar, “Design and Implementation of a New Procedure for Ultrasonic NDT of Composite Parts,” Tehran International Congress on Manufacturing Engineering, Tehran, Iran, Dec. 12-15, 2005.

48. Vahid Mahboobipour and Farhang Honarvar; “Construction of B-Scan Images in Ultrasonic Testing,” 7th National Conference on Welding and Inspection, Tehran, Iran, Dec. 6-7, 2005.

49. Sina Sodagar, Farhang Honarvar, and Anthony N. Sinclair, “Scattering of Acoustic Waves from Encased Type I and Type II Transversely Isotropic Cylinders,” Proceedings of the 9th International and 13th Annual Conference of the Iranian Society of Mechanical Engineers, Isfahan University of Technology, Tehran, Iran, May 2005. -

50. Mohsen Ghorbani, and Farhang Honarvar, “Measurement of Sound Velocity and its Uncertainty in Solid Materials,” Proceedings of the 9th International and 13th Annual Conference of the Iranian Society of Mechanical Engineers, Isfahan University of Technology, Tehran, Iran, May 2005.

51. Farhang Honarvar and Asmail Enjilela; "Acoustic Waves in Transversely Isotropic Medium," Proceedings of the 8th International and 12th Annual Conference of the Iranian Society of Mechanical Engineers, Tarbiat Modares University, Tehran, Iran, May 2004.

52. Farhang Honarvar, Asmail Enjilela and S. Abbas Mirnezami, "Axisymmetric Free Vibrations of Finite Transversely Isotropic Cylinders," Proceedings of the 8th International and 12th Annual Conference of the Iranian Society of Mechanical Engineers, Tarbiat Modares University, Tehran, Iran, May 2004.

53. Sina Sodagar, Farhang Honarvar, and Anthony N. Sinclair; "Scattering of Acoustic Waves from Type I and Type II Transversely Isotropic Cylinders," Proceedings of the 8th International and 12th Annual Conference of the Iranian Society of Mechanical Engineers, Tarbiat Modares University, Tehran, Iran, May 2004.

54. Mohammad-Reza Kamali, Farhang Honarvar, and Saeed Shakhesi; "Ultrasonic Evaluation of Glass Fiber Reinforced Composites," Proceedings of the 8th International and 12th Annual Conference of the Iranian Society of Mechanical Engineers, Tarbiat Modares University, Tehran, Iran, May 2004.

55. F. Honarvar, S. Dilfanian, H. Hamedi, and M. Kazerooni, “Measurement of Surface Cracks by Ultrasonic of Time-of-Flight Diffraction (TOFD) Technique.” 5th Iranian Manufacturing Engineering Conference, Amirkabir University of Technology, Tehran, Iran, Feb. 2003.

56. F. Honarvar, M. H. Kian-Mehr and M. Vahdati, “Design and Construction of Reference Samples for Low Frequency Sonic and Ultrasonic Testing of Fiber-Reinforced Composites.” 4th Conference of the Aerospace Society of Iran, Amirkabir University of Technology, Tehran, Iran, Feb. 2003.

57. F. Honarvar, S.A. Mahdavi, ” Application of Digital Signal Processing Techniques to the Measurement of Crack Size by Ultrasonic Time-of-Flight Diffraction Technique,” 6th Iranian Manufacturing Engineering Conference, Amirkabir University of Technology, Tehran, Iran, Dec. 2003.

58. F. Honarvar, S.A. Mahdavi, ”Estimation of Uncertainty in Ultrasonic Tests Performed by TOFD Technique,”3rd Congress of International Institute of Welding, Tehran, Iran, Dec. 1-3, 2003.

59. F. Honarvar, H. Hamedi, S. Dilfanian, and M. Kazerooni, “ Design of Probe Holder and Moving Mechanism for Automatic Ultrasonic Testing of Oil and Gas Pipeline Girth Welds,” Proceedings of the 6th International and 10th Annual Conference of the Iranian Society of Mechanical Engineers, K. N. Toosi University of Technology, Tehran, Iran, May 25-27, 2002.

60. M. R. Kamali, F. Honarvar, and A. Masoud, “Nondestructive Evaluation of Composite Cylinders by C.T. Scan,” Proceedings of the 6th International and 10th Annual Conference of the Iranian Society of Mechanical Engineers, K. N. Toosi University of Technology, Tehran, Iran, May 25-27, 2002.

61. F. Honarvar, S.A. Mirnezami and A. N. Sinclair, “Propagation of Longitudinal Waves in Transversely Isotropic Cylinders.” Proceedings of the 5th International and 9th Annual Conference of the Iranian Society of Mechanical Engineers, Guilan University, Rasht, Iran, May 27-29, 2001.

62. F. Honarvar and F. Kheirolahzadeh, M. Soltanieh, “Quality Control of Automobile Engine Valves by Ultrasonic Testing.” Proceedings of the 5th International and 9th Annual Conference of the Iranian Society of Mechanical Engineers, Guilan University, Rasht, Iran, May 27-29, 2001.

63. F. Honarvar and A. Mohammadi, “Quality Control of Spot Welds by Ultrasonics.” Iranian Society of Welding and Nondestructive Testing Congress, Tehran, Iran, May 8-10, 2001.

64. F. Honarvar and S. A. Mirnezami, A. Rahimian, “Construction of C-Scan Images from Ultrasonic Testing of Thermal Insulation Layers.” Iranian Society of Welding and Nondestructive Testing Congress, Tehran, Iran, May 8-10, 2001.

65. F. Honarvar, H. Hamedi and M. Kazerooni, “Design of the Probe Holder Mechanism and the Motion System of an Automatic Ultrasonic Testing System for Pipeline Weld Inspection.” 6th International and 10th Annual Conference of the Iranian Society of Mechanical Engineers, K. N. Toosi University of Technology, Tehran, Iran, May 2002.

Books

1. Farhang Honarvar and Reza Baqeri-Borouji, Case Depth: Ultrasonic Measurement, in Encyclopedia of Iron, Steel, and Their Alloys, Taylor and Francis, New York, 2016.

2. Hamid Ahmadian, Farhang Honarvar, and Abdolreza Ohadi (editors), Proceedings of the 3rd International Conference on Acoustics and Vibration, Iranian Society of Acoustics and Vibration, 2014.

3. Farhang Honarvar, Ultrasonic Nondestructive Testing, Nopardazan Publishers, Tehran, Iran, 2005 (in Persian).

4. Farhang Honarvar,Nondestructive evaluation of cylindrical components by resonance acoustic spectroscopy, PhD dissertation, Department of Mechanical and Industrial Engineering, University of Toronto, 1997.

5. Farhang Honarvar, An Investigation into rolling element bearing analysis, MASc dissertation, Department of Mechanical Engineering, University of Waterloo, 1993.


Book Chapters

1. Farhang Honarvar and Esmaeil Enjilela, Resonance Acoustic Spectroscopy, Chapter 8, Handbook of Applied Solid State Spectroscopy, D.R. Vij (Editor), Springer, 2006.

2. A. N. Sinclair, V. Safavi, and F. Honarvar, “Ultrasonic Measurement of Erosion/Corrosion Rates in Industrial Piping Systems,” Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Vol. 30, pp 1333-1340, 2011.

1. B. Ghazinouri, F. Honarvar, and M. Zeighami, “Automatic inspection of a rectangular hollow section by using an ultrasonic scanning robot,” Journal of Vibration and Sound, 7(14), 3-16, Fall 2018.

2. Mehran Sepehri and Farhang Honarvar, “Design of an Ultrasonic Bubbler System for Inspection of Adhesive Bonds,” Iranian Journal of Vibration and Sound, 3(5), 48-56, 2014.

3. Mohammad R. Chehrezad and Farhang Honarvar, “Nondestructive Evaluation with Laser Ultrasonics,” Mechanical Engineering, Vol. 22, No. 88, April 2013.

4. S.A. Arham-Namazi, F. Honarvar, M. Ayani, “Measurement of wave velocity in AISI 4140 steel using inverse coherence function,” Journal of Vibration and Sound, Vol. 2, No. 3, pp 47-54, Spring & Summer 2013.

5. Ramin Mehdizad and Farhang Honarvar, “A review of case-depth measurement techniques,” Manufacturing Technology, Vol. 1, No. 4, Feb. 2011.

6. Abolfazl Shoja and Farhang Honarvar, “Electronic noise for detection of leaking gas and finding the leakage source,” Mechanical Engineering, No. 70, 2010.

7. Ehsan Dehghan and Farhang Honarvar, “Automated Ultrasonic Nondestructive Testing of Pipeline Girth Welds,” Mechanical Engineering, No. 59, July 2007.

8. F. Honarvar, S. A. Taymoori, H. Tavalla, A. Mohammadi, and F. Sadafi; “Ultrasonic Inspection of Spot Welds on the Body of a Peugeot 405 Automobile,” Mechanical Engineering, No. 52, April 2007.

9. Farhang Honarvar and Salomeh Tabatabaei; "New NDT Techniques at the Verge of the Third Millennium," Welding, No. 35, Fall 2004.

10. Farhang Honarvar, "Ultrasonic Testing - Generation of Ultrasonic Waves," Weld Engineering, No. 15, Winter 2002.

11. Farhang Honarvar, "Ultrasonic Testing - Reflection and Refraction of an Obliquely Incident Wave at an Interface," Weld Engineering, No. 14, Winter 2002.

12. Farhang Honarvar, "Ultrasonic Testing - Transmission and Reflection of a Normally Incident Wave at an Interface," Weld Engineering, No. 13, Winter 2001.

13. Farhang Honarvar, "Ultrasonic Testing - Principles and Initial Concepts," Weld Engineering, No. 12, Fall 2001.

14. Farhang Honarvar; "Applications of Rayleigh and Lamb Waves in Ultrasonic Nondestructive Testing," Weld Engineering, No. 6, Spring and Summer 1999.