K. N. Toosi
 
University

Faculty of
Mechanical
Engineering
home research
interests professional
biography professional
experiences publications labs teaching
courses
 

Abdolhossein Jalali Aghchai

Dr. Jalali Aghchai
Faculty of Mechanical Engineering
K. N. Toosi University of Technology
P. O. Box: 19395-1999
Tehran, Iran

Tell: (+98 21) 8406 3229
Fax: (+98 21) 8867 4748

Email: Jalali@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

 

Journal Papers

      ISI Papers:

    • M.Darvishi, M.Morovvati, A. Jalali Aghchai, Effects of equal channel angular rolling process on the mechanical properties of Al-Cu two-layer sheets: experimental and numerical approaches, Journal Engineering Research Express(2023) 5:0-35023
     
     
     
    • P.Kiani, M.Ghoreishi, A. Jalali Aghchai, Simultaneous optimization of process parameters in hot forging of axisymmetric part of AA7075 by minimizing forming force and considering variation of stress distribution,Journal of the Brazilian Society of Mechanical Sciences and Engineering(2022) 44:1-15



    • A. Jalali Aghchai, A.Barimani-Varandi ,Enhancement of the Tensile Shear Strength for Joining Low-ductility Aluminum to High-strength Steel by using Electrically-Assisted Mechanical Clinching (EAMC) , PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE(2021) 235:1790-1799
     
     
    • A. Jalali Aghchai, A.Barimani-Varandi,Francesco Lambiase, Failure behavior in electrically-assisted mechanical clinching joints, Journal of Manufacturing Processes(2021) 68:1683-1693
     
     
    • A. Jalali Aghchai, A.Barimani-Varandi, Electrically-Assisted Mechanical Clinching of AA6061-T6 Aluminum to Galvanized DP 590 Steel: Effect of Geometrical Features on Material Flow and Mechanical Strength,Mechanics and Industry(2020) 21:1-13



    • A. Jalali Aghchai, Soroush Khatami "Experimental and numerical formability investigation of FML sheets with glass fiber reinforced core", June 2018, DOI: 10.1007/001700181836
     
     
    • Alireza Saadatfard, Mahdi Gerdooei, A. Jalali Aghchai "Drawing potential of fiber metal laminates in hydromechanical forming: A numerical and experimental study", Journal of Sandwich Structures and Materials , June 2018 , DOI: 10.1177/1099636218785208
     
     
     
    • S. A. Fatemi, J. Zamani Ashany, A. Jalali Aghchai and A. Abolghasemi, "Experimental investigation of process parameters on layer thickness and density in direct metal laser sintering: a response surface methodology approach", VIRTUAL AND PHYSICAL PROTOTYPING, 2017, DOI: 10.1080/17452759.2017.1293274
     
     
    • A. Jalali Aghchai, A. Abolghasemi, B. Moradkhani, M. Tajik "Experimental, theorical and numerical investigation of springback behavior of Al/Composite/Al sandwich sheet", journal of Sandwich Structures and Materials, Mar 2016, DOI: 10.1177/1099636216636099
     
     
    • S. V. Mohammadi, M. H. Parsa, A. Jalali Aghchai, Simplified springback prediction in Al/PP/Al sandwich air bending, Journal of Sandwich Structures and Materials, published online 4 December 2014, DOI: 10.1177/1099636214560580
     
     
    • M. H. Parsa, S. V. Mohammadi, A. Jalali Aghchai, Al3105/Polypropylene/Al3105 laminates Springback in V-die bending, I. J. of Advanced Manufacturing Technology, Accepted: 14 July 2014, DOI 10.1007/s00170-014-6173-0
     
     
    • B. A. Khiavi, A. Jalali Aghchai et. al, Effect of friction stir processing on mechanical properties of surface composite of Cu reinforced with Cr particles, I. J. Advanced Materials Research, Accepted, 2014, DOI:10.4028
     
     
    • N. Razani, A. Jalali Aghchai, B. Mollaei, Flow-forming optimization based on hardness of flow-formed AISI321 tube using response surface method, I. J. of Advanced Manufacturing Technology, (2014),70,5-8, 1463-1471
     
     
    • A. Jalali Aghchai, M. Shakeri, B. Mollaei, Influences of Material Properties of Components on Formability of Two-Layer Metallic Sheets, International Journal of Advanced Manufacturing Technology,(2013) 66: 809-823
     
     
     
    • A. Jalali Aghchai, N. Razani, B. Mollaei, Flow forming optimization based on diametral growth using finite element method and response surface methodology, Instn Mech Engrs Part B: J Engng Manuf.(2012), 226(12) 2002-2012



    • N. Razani, A. Jalali Aghchai, B. Mollaei, Experimental Study on Flow Forming Process of AISI 321 Steel Tube Using Taguchi Method, Instn Mech Engrs Part B: J Engng Manuf. (2011) 225(B): 2024-2031



    • A. Khorasani, A. Jalali Aghchai, A. Khorram, Chatter Prediction in Turning Process of Conical Workpieces by Using Case Based Resoning (CBR) Method and Taguchi Design of Experiment, International Journal of Advanced Manufacturing Technology (2011) 55:457–464



    • A. Jalali Aghchai, M. Shakeri, B. Mollaei, Theoretical and Experimental Formability Study of Two-Layer metallic sheet (Al1100/St12), Instn Mech Engrs Part B: J Engng Manuf (2008) 222(B):1131-1138

    Other Journal Papers:
    • F.Agakhani Mahyari, H.Safavi, A. Jalali Aghchai, An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al/Al/Steel sheet produced by cold roll bonding, The Journal of Solid and Fluid Mechanics(2023) 13(2):1-4



    • P.Kiani, M.Ghoreishi, A. Jalali Aghchai, Estimation of Necessary Force for Isothermal Forging of Disc Piece of Aluminum Alloy 7075 by Slip Line Field Method, Modares Mechanical Engineering(2022) 22(12):737 -745
    • A. Jalali Aghchai, A.Barimani-Varandi, Electroplastic Friction Stir Spot Welding for Joining AA6061-T6 Aluminum to Galvanized DP590 Steel, AmirKabir Journal Of Science and Technology(2021) 53:3733-3750


    • A.Alimohammadi, A. Jalali Aghchai, Experimental and Numerical Study on forming limit diagram of two-layer metallic sheets at high temperature, The Journal of Solid and Fluid Mechanics(2020) 10:107-120
    • A.Khorram, M.Razazan, A.Jalali, Investigation of the Process Parameter Effects on the Hole Geometry Characteristics in Laser Drilling of Hastelloy X Superalloy, The Journal of Solid and Fluid Mechanics, Spring, 2019 (In Persian)



    • A.H. Sakhaie, A. Jalali Aghchai, M.Kazemi Nasrabdi, Experimental Study on the Effect of Friction Stir Spot Welding Process Parameters on the Shear Strength of Created Joints in AA7075-T6, The Journal of Solid and Fluid Mechanics, Autumn, 2017 (In Persian)



    • A.Rajaee, A.Jalali Aghchai ,Study on the Influences of Effective Parameters on the Fatigue Life ofWelded Joint betweenLocomotive Gearbox Baracket and Bogie Using FE Model Verified by Experimental Results, The Journal of Solid and Fluid Mechanics, Summer ,2017 (In Persian)



    • A.Abolghasemi, A.Jalali Aghchai ,B.Moradkhani, S.A.Fatemi, Investigation of Springback Behavior of Fibre-Metal Laminates using Equivalent-Layer and Separate-Layer Theories, The Journal of Solid and Fluid Mechanics, Winter, 2017 (In Persian)
    • A. Jalali Aghchai, Gh. Payganeh , M. Tajik, Analysis of Effects of Geometric Parameters of Layers on Formability of Aluminum/Polyurethane/Aluminum Sandwich Sheets, The Journal of Solid and Fluid Mechanics, Spring, 2016 (In Persian)



    • R. Kassaei, A. Rahi, A. Jalali, Finite Element Analysis of Bending Displacement of Stiffened Pallets of Automatic Garages under Vehicle Load. International Journal of Engineering Research and Applications(IJERA), Accepted 2011-09-18



    • S. V. Mohammadi, M. H. Parsa, A. Jalali Aghchai, Effect of the thickness distribution and setting condition on bending springback in Multi-layer sheet bending, International Journal of Mechanical Engineering Science and Technology, Vol. 3, No. 4, 2011, pp. 225-235



    • B. Mollaei, A. Jalali Aghchai, M. Shahini, P. Hanafizadeh and M. Hasani, Study and Investigation on Ejecting Systems (Pneumatic and Hydraulic Systems) in Forming Dies at Iran-Khodro Co. Iranian Mechanical Engineering Magazine, Volume 12, No 31, Nov. 2003, pp 86-91

      •  

 

International Conference Papers:

  •   A. Jalali Aghchai, M.Moodi, Investigation of spring-back in bimetallic tubes bending process using FEM and Experimental Methods, The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Feb. 18-19, 2014, Tehran, Iran

    •  

  •   A. Jalali Aghchai, M.Moodi, Theoretical and Experimental Investigation of the effects of Bimetallic Tubes Bending Process Parameters on Spring-back, The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Feb. 18-19, 2014, Tehran, Iran

    •  

  •   B. A. Khiavi, A. Jalali Aghchai et. al, Effect of friction stir processing on mechanical properties of surface composite of Cu reinforced with Cr particles, 4th International Conference on Ultrafine Grained and NanoStructured Materials, 6 Nov. 2013, Tehran University, Iran

    •  

  •   A. Jalali Aghchai, S. A. Razavi, Simulation study and experiment on laser ablative cleaning of copper oxides, The ninth conference on Lasers in the Conservation of Artworks (LACONA IX), Accepted, Sep. 2011, England

    •  

  •   M. H. Parsa, A. Jalali Aghchai, S. V. Mohammadi, Spring back analysis of Al3105/polymer/Al3105 laminated sheet in bending process, The 8th International conference on Numerical Simulation of 3D Sheet Metal Forming Processes, Accepted, Aug. 2011

    •  

  •   A. Jalali, M. Shakeri and B. M. Dariani, Three Dimensional Elasticity Solution for Transversally Loaded of Simply Supported Functionally Graded Plates Using Multi Layer Method, 10th International Symposium on Multiscale, Multifunctioal and Functionally Graded Materials, MM & FGMs 2008, Sendai, Japan

    •  

  •   A. Jalali, M. Shakeri and B. M. Dariani, Investigation and Analysis on formability of Al1100/St12 Sheet, 16th Annual (International) Conference on Mechanical Engineering-ISME2008 May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

    •  

  •   A. Jalali and A. Abdullah, Study and testing of an Effective Adhesive Used in Assembling the High Power Magnetostriction Ultrasonic Transducer, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), Dec 2007, Tehran, Iran

    •  

  •   A. Jalali and A. Abdullah, Designation of an Equivalent Electrical Circuit for Magnetostriction Ultrasonic Transducer Based on its Equivalent Mechanical circuit, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), Dec 2007, Tehran, Iran

    •  

  •   A. Jalali and A. Abdullah, Designation of an Equivalent Electrical Circuit for Magnetostriction Ultrasonic Transducer Based on its Equivalent Mechanical circuit, 2nd Tehran International Cong22- A. Jalali, K. Latifi, M. Shakeri and B. Mollaei, Experimental Study on Formability of Two-Layer Metallic Sheets, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), Dec 2007, Tehran, Iraness on Manufacturing Engineering (TICME2007), Dec 2007, Tehran, Iran

    •  

 

National Conference Papers:

  •   N. Razani, B. Mollaei, A. Jalali Aghchai, Experimental study on out of roundness of flow- formed AISI 321 steel tube by design of experiment, 11th Iranian Conference on Manufacturing Engineering, Oct. 2010, Tabriz

    •  

  •   N. Razani, B. Mollaei, A. Jalali Aghchai, Hardness prediction of flow- formed AISI 321 steel tube using response surface method, 11th Iranian Conference on Manufacturing Engineering, Oct. 2010, Tabriz

    •  

 

 

 

 

Faculty of Mechanical Eng. of K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)

Tell: (+98 21) 8406 3255, 8867 4747   Fax: (+98 21) 8867 7274

Website: www.kntu.ac.ir

Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

 

Last Update: Dec 2019

© Copyright 2020 K. N. Toosi University
Best View: Mozilla Firefox 3+

Design by Faculty of Mechanical Engineering