PH. D. STUDENTS

3. Razieh Hamedi, "not defined", expected year of graduation 2020.
2. Majid Shateri, "not defined", expected year of graduation 2018.
1. Tayeb Nazghlichi, "Thermal stability analysis of lead-acid batteries", expected year of graduation 2016.

Co-Advisor for Ph. D. STUDENTS

3. Hamoon Jafarian, "Modeling and optimization of Devap conditioning systems with real boundary conditions", expected year of graduation 2016.
2. Hamoon Pourmirza-Agha, "Optimization of thermal-electrochemical governing equations of lead-acid batteries", expected year of graduation 2016.
1. Amir-Babak Ansari, "Reduced Order Modeling of Lead-Acid Battery", August 27, 2016.

M. Sc. STUDENTS

32. Negar Razzaghi , "Modeling and Simulation of Thermal Management System for Lithium Batteries in HEV". >
31. Shayan Naderi, "Simulation of Wind Farm using Modified Actuator Disk Model", expected year of graduation 2018.
30. Mehrzad Alizadeh Kolagar, "Simulation of Two-Phase Flow in Direct Methanol Fuel Cell", expected year of graduation 2018.
29. Navid Asadi Abkenar, "Design and Manufacturing of Solar Concentrating Power Plant", expected year of graduation 2017.
28. Navid Aminnia, "Optimization of Pin-Type Channel", expected year of graduation 2018.
27. Zahra Porhemmat, "Modeling and Simulation of Oxygen Cycle in Zinc-Silveroxide Batteries", expected year of graduation 2018.
26. Simin Seifi Khodashahri, "Blade Design", expected year of graduation 2018.
25. Pooyan Heravi, "Modeling Two-Phase Flow in Direct Methanol Fuel Cell", expected year of graduation 2018.
24. Hamidreza Abbasi, "modeling and simulation of zinc-air battery", September 18, 2016.
23. Syawash Azizi, "Solution of electrochemical governing equations of lithium-ion batteries", expected year of graduation 2015.
22. Maedeh Sadatgol Tabarestani, "Modeling and Simulation of Electrochemical Impedance Spectroscopy in Lead-Acid Battery", expected year of graduation 2015.
21. Shiva Garoosi, "Aeroelastic Analysis Of Wind turbine Blades", January 31, 2016.
20. Mohammad Imamjomeh, "Design and Fabrication of a Adsorption Solar Chiller with Silica Gel and Water", expected year of graduation 2015.
19. Razieh Hamedi, "Calculation of Velocity Profile in Different Distances behind Horisontal-axis Wind Turbines Affected Turbulent Flows for Achieving their Optimized Layout in Wind Farm and Maximum Power", expected year of graduation 2015.
18. Niloofar Kamyab, "Two-Dimensional Simulation of Electrochemical Battery Systems", September 21, 2014.
17. Farnaz Tajdari, "Simlation of Thermal-Electrochemical Governing Equations of Battery Systems", September 21, 2014.
16. Mohammad Safari, "Design of a Passive Solar Heating System for a Guard Room using Solar Chimney and Phase-Change Materials", September 22, 2014.
15. Mina Taheri, "Energy harvesting from human body to supply the drug delivery devices by MEMS technology", September 17, 2014.
14. Afsin Davoodi, "Analysis of Water in a Industrial Complex", February 19, 2014.
13. Ghazaleh Asefi, "Exergoecconomical Analysis of Geothermal Power Plants", March 20, 2014.
12. Ilghar Athari, "Design of a Photovoltaic-Thermal System for a Aviculture Complex", January 26, 2014.
11. Sina Salemi, "Simulation of PEM Fuel Cells using Boundary Element Method", February 16, 2014.
10. Behrang Noshiri, "Simulation of PEM Fuel Cells using Boundary Element Method", expected year of graduation 2013.
9. Sepideh Gheibi, "Simulation of Two-Phase Transport Equations of PEM Fuel Cells", September 16, 2013.
8. Mohammad Bakhsi, "Techno-Economic Study of Energy Consumption Optimization and Management in Iran's CNG Stations", September 21, 2013.
7. Mohammad Ghanavati, "Numerical Simulation of Governing Equations of Direct-Methanol Fuel Cells", expected year of graduation 2013.
6. Elaheh Jamali, "Modeling and Simulation of Direct Methanol Fuel Cells (DMFC)", September 16, 2013.
5. Hanieh Issac, "Simulation of Solar Seasonal Storage Systems", August 18, 2013.
4. Ida Karimi Dastjerdi, "Exergoeconomic Analysis of Geothermal Heat Pump" January 5,2012.
3. Hamid Nasir, "Simulation of Wind Turbine Blade using Boundary Element Method," January 15, 2013.
2. Seyed Yahya Nobakht, "Optimal economical design of a PV-Gas Engine hybrid system for supplying electrical load of a sport complex in Tehran", November 10, 2012.
1. Amin Aliakbar, "Modeling and Simulation of Electrochemical Governing Equations of Zinc-Silver Oxide Batteries," September 21, 2011.

Co-Advisor for M. sc. STUDENTS

2. Mahshid Vatani, "Thermodynamic Evaluation of Optimum Flashing Pressure and the Effect of Various Types of Binary Cycles in the Combined Geothermal Power Plants," December 19, 2012.(Continued as PhD Student at Nooshirvani (Babol) University, Iran)
1. Alireza Safaripour Tabalvandani, "Modeling of an Electro-osmotic Fuel Pump for Miniature Direct Methanol Fuel Cells," 2012.

B. Sc. STUDENTS

29. Mahdieh Mosayebi , "Design & Fabrication of a Battery Power Pack Concerning Eectrical and Thermal Behavior.". >
28. Reza Jamali , "Design & implementation an air conditioned safety helmet using Thermoelectric modules". >
27. Alireza Amiri Margavi , "Design & implementation an air conditioned safety helmet using Thermoelectric modules". >
26. Samaneh Shokrollahi , "Design and Manufacturing of a Solar Water Desalination System", September 20 , 2015.
25. Omid Dehghan , "Deriving Wind Profile at Wind Turbine Wake Zone for Wind Farm Layout Design". >
24. Morteza Naqmekoo , "Design and fabrication of a small beverage cooler using thermoelectric technology". >
23. Zahra Gaemi , "Design and Fabrication of a Solar Green Hause with Brakish Water". >
22. Kiana Brenjkar , "Modified Design of Green Battery for Harvesting Tidal Energy in Iran", September 22, 2014.
21. Mahdis Osooli , "Modified Design of Green Battery for Harvesting Tidal Energy in Iran", September 22, 2014.
20. Sara Khosravi , "Investigation of OTEC Power Plants in Caspian Sea".
19. Mohsen Maleki , "Wind Turbine Blade Design using Blade Element Momentum Method", September 21 , 2013.
18. Adel Heydarabadipour , "Simulation of Wind Turbine using Unsteady Blade Element Momentum Method".
17. Akram Gholami Pareh , "Design and Fabrication of TEC Coolers".
16. Zahra Ojaghi Seyedsaran , "Design and Fabrication of TEC Coolers".
15. Maziar Vahdati , "Disign and Fabrication of Solar Concentrator".
14. Syawash Azizi , "Analytical Soltion of Lithium-Ion Battery Governing Equations".
13. Sina Azami , "Investigation of Effect of Turbulence Modeling on Wind Turbine Blade Aerodynamic Coefficients".
12. Mojtaba Maktabifard , "Design and Fabrication of a Thermoelectric Cooler".
11. Sogand Parvaneh Masiha , "Analysis of Solar Adsorbtion Chillers".
10. Sina Hassanpour Yousefi , "OTEC and Fuel Cell".
9. Niloofar Kamyab , "Design of a Green Battery for Tidal Energy in Iran".
8. Farnaz Tajdari , "Design of a Green Battery for Tidal Energy in Iran".
7. Mina Taheri , "Numerical Simulation of High-Temperatre PEM Fuel Cells".
6. Yasin Azmand , "Simlation of Wind Turbines using Blade Element Momentum Method".
5. Samaan Saboori , "Enhancing OTEC Power Plant Efficiency by Solar Boosting".
4. Mohammadhossein Kazemi , "Simulation of Lithium-Ion Batteries using Engineering Method".
3. Alireza Najafi , "Simlation of OTEC Power Plants".
2. Shahab Rezaee , "Simlation of OTEC Power Plants".
1. Alireza Yaghoobi , "Modeling and Simulation of Electrochemical Governing Equations of PEM Fuel Cell".

test

Faculty of Mechanical Eng. of K. N. Toosi University of Technology
Vanak Square, Molla-Sadra, Pardis
Box 19395-1999
1999143344 TEHRAN
IRAN (ISLAMIC REP.)

Tell: (+98 21) 8867 4841-8 Fax: (+98 21) 8867 7274

Website: www.kntu.ac.ir

Email: mechanic@K
( Notice that to avoid spam mails, "kntu.ac.ir" is replaced with K )

Farschad Torabi

PH. D. STUDENTS

Co-Advisor for Ph. D. STUDENTS

M. Sc. STUDENTS

Co-Advisor for M. sc. STUDENTS

B. Sc. STUDENTS